Library

Report exploring feasibility of designing prescriptive retrofit measure packages for typical Chicago region multifamily buildings in order to achieve 25% source energy savings.

Report analyzing results in crawlspace retrofits in multifamily buildings.

Report summarizing post-retrofit results for 13 existing homes in a deep energy retrofit pilot program.

Report describing a research study of the performance of interior low-E storm windows in two test houses at Pacific Northwest National Laboratory in Richland, WA.

Report describing a research study into the performance of Low-E storm windows installed in two test homes at Pacific Northwest National Laboratory in Washington state.

Report evaluating opportunities to improve and streamline delivery of residential retrofit measures.

Research study documenting market-ready energy solutions to improve the efficiency of new affordable housing in the marine climate of Washington State.

Report examining implementation of an exterior insulation and over-clad strategy for brick masonry buildings in Chicago.

Case study describing novel technique for installing exterior spray foam on foundation walls that uses high-pressure water sprayer and a “hydro vac” to remove dirt along the foundation wall.

U.S. Code describing excess flow valve installation requirements.

Article containing background knowledge on expansion tanks.

Article explaining common myths about expansion tanks and proper facts.

Report about an expert meeting focused on issues surrounding cladding attachment and performance of walls with exterior insulating sheathing.

Expert meeting report describing the need for greater understanding of foundation systems including moisture and insulation issues.

Expert Meeting about interior insulation retrofit of mass masonry wall assemblies held on July 30, 2011.

Report presenting the process of a residential retrofit project for houses in the states of Florida and Alabama, including findings at the time of reporting and highlights of the first home to meet the target HERS Index of 70.

Fact sheet describing the Extended Plate Wall (EPW) a system that incorporates a 2-inch layer of foam plastic insulative sheathing within the framing for top and bottom plates, streamlining air sealing, window and door installation, weather resistive barrier application, and cladding attachment for...

The New York State Energy Research and Development Authority (NYSERDA) is interested in finding cost-effective solutions for deep energy retrofits (DERs) related to exterior wall insulation in a cold climate, with targets of 50% peak load reduction and 50% space conditioning energy savings.

Research study developing baseline engineering analysis to support the installation of thick layers of exterior insulation (2 in. to 8 in.) on existing masonry walls and wood framed walls.

Article from Building Science Corporation on construction techniques for extreme heat conditions in Dubai and Las Vegas.

Webpage developed by OSHA to provide workers and employers useful, up-to-date information on fall protection.

Website of the Federal Emergency Management Agency

A recovery advisory guide presenting important recommendations to reduce wind and water infiltration damage to new and existing residential buildings.

Document discussing methods to bioengineer stabilization of shorelines using living and non-living plant materials in combination, known as the “Living Shorelines” concept.

Factsheet describing the flood-resistant provisions of the 2021 International Codes and American Society of Civil Engineers (ASCE) 24-14, Flood Resistant Design and Construction, that are “higher standards” and that are more specific than the National Flood Insurance Program (NFIP) requirements.

Fact sheet discussing safe room and storm shelter door assemblies along with ICC® 500 compliance.

Technical bulletin describing a set of standards for building materials able to withstand flood waters as needed with wet floodproofing.

Guide discussing the siting of residential and community safe rooms at appropriate elevations and locations.

Fact sheet discussing designs for prefabricated safe rooms built to ICC 500 standards mentioned in FEMA P-361.

A website providing information on funding for mitigation programs to reduce disaster losses under FEMA's Hazard Mitigation Grant Program.

ICC 500 provides the minimum requirements to safeguard public health, safety, and general welfare relative to the design, construction, and installation of storm shelters constructed for protection from high winds associated with tornadoes and hurricanes.

Document describing ASCE 24-14 Flood Resistant Design and Construction changes and highlights, on topics including siting, materials, performance, and utilities.

Webpage containing the most recent links for FEMA P-361, FEMA P-320, and other documents produced by FEMA regarding the construction of safe rooms for emergencies.

FEMA guidance for flood damage in areas prone to flooding.

Report of a field evaluation of four novel roof designs to see how each design would reduce space-conditioned energy use so that the knowledge gained could be applied to the design of new manufactured homes.

A report showing what happens when windows break as a result of temperature differences between the inside and outside of the home, as well as code standards for the State of California regarding window exposure to wildfires.

Updated wildfire risk assessment, community impacts, and building science measures following the disastrous 2020 wildfire season in the western U.S.

Standard providing a comprehensive approach to evaluating, selecting, specifying and installing flexible duct in HVAC systems.

Link to all versions of ASCE/SEI 24, a standard describing the minimum requirements and expected performance for the siting and design and construction of buildings and structures in flood hazard areas that are subject to building code requirements.

Webpage containing links to all editions of the Florida Building Code.

Presentation explaining the fenestration elements of the Florida Building Code.

Article describing the history and the current debate about how to adjust the Florida building codes.

Article discussing flow-through assemblies of walls.

Journal article describing lessons learned from updating a 16-year-old deep-energy retrofit.

Article describing the effective R-values of various subslab insulation products, including foil bubble pack.

Report outlining the energy upgrade package implemented in Ft. Benning, GA, Indianhead Townhomes project and the findings of the Southface Energy Institute's post-renovation analysis.

Report about development of effective strategies to reduce the overall building energy use in line with Building America goals in this modestly priced market rate project.

Handbook providing guidance on the design and construction of foundations for homes, including insulation, air sealing, and water management details for basements, crawlspaces, and slabs.

Fact sheet describing foundation design criteria, foundation types suitable for coastal environments, and addressing foundations for high-elevation coastal areas (e.g., bluff areas); also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

A guideline containing fire sprinkler insulation requirements from the Prescott, Arizona Fire Department.