BASC Search | Building America Solution Center

Duct insulated with a minimum of R-8 insulation

Duct insulated with a minimum of R-8 insulation

Image

Ducts Buried in Attic Insulation and Encapsulated

Guide

Guide describing approaches to burying and encapsulating ducts in unconditioned attics to increase the overall R-value of duct insulation.

The duct for this exhaust fan is properly routed through the roof and the duct is insulated

The duct for this exhaust fan is properly routed through the roof and the duct is insulated

Image

Ducts Encapsulated in Spray Foam and Buried in Attic Insulation

Video

Video describing various ways to bring HVAC ducts installed in an attic within the thermal envelope of the home by insulating the attic or by covering the ducts with spray foam and burying them in fibrous insulation.

Wrong: Ductwork is not fully encapsulated with ccSPF insulation. The duct jacket is still fully visible at sections of the duct

Wrong: Ductwork is not fully encapsulated with ccSPF insulation. The duct jacket is still fully visible at sections of the duct

Image

Spray foam insulation used for raised ceiling duct chase

Spray foam insulation used for raised ceiling duct chase

Image

The attic duct chase insulated and sealed to the attic floor with spray foam

The attic duct chase insulated and sealed to the attic floor with spray foam

Image

Right: Ducts are completely buried beneath insulation to the depth specified in the plans

Right: Ducts are completely buried beneath insulation to the depth specified in the plans

Image

Wrong: Ducts are held above the ceiling plane with strapping to provide a good angle into top-entry boots. Once the ceiling insulation is added, this duct will protrude from the ceiling insulation and will not be buried

Wrong: Ducts are held above the ceiling plane with strapping to provide a good angle into top-entry boots. Once the ceiling insulation is added, this duct will protrude from the ceiling insulation and will not be buried

Image

Buried ducts are laid on the floor of a vented attic then covered with spray foam and blown attic floor insulation

Image

Right - Spray foam insulation has been sprayed onto the underside of the sloped roof and the gable end wall to provide a sealed, insulated attic for housing the HVAC ducts

Right - Spray foam insulation has been sprayed onto the underside of the sloped roof and the gable end wall to provide a sealed, insulated attic for housing the HVAC ducts

Image

Right – Spray foam insulation is sprayed on the underside of the roof deck to provide a conditioned space in this low attic for the HVAC ducts.

Right – Spray foam insulation is sprayed on the underside of the roof deck to provide a conditioned space in this low attic for the HVAC ducts.

Image

The spray foam-insulated attic provides a temperate place for the ERV ducts, which provide filtered fresh air to every room in the house.

The spray foam-insulated attic provides a temperate place for the ERV ducts, which provide filtered fresh air to every room in the house.

Image

Right – Spray foam air seals and insulates the walls including the walls behind the fireplace and covers the underside of the roof deck of this mixed-dry climate home to provide an insulated attic space for HVAC ducts.

Right – Spray foam air seals and insulates the walls including the walls behind the fireplace and covers the underside of the roof deck of this mixed-dry climate home to provide an insulated attic space for HVAC ducts.

Image

Spray foam insulation is applied along the underside of the roof deck to provide a conditioned and non-vented attic space for ducts and air handlers.

Spray foam insulation is applied along the underside of the roof deck to provide a conditioned and non-vented attic space for ducts and air handlers.

Image

The unvented attic is insulated along the underside of the roof deck with 7 inches (R-49) of closed-cell spray foam, providing vaulted ceilings and a conditioned knee wall space for ducting.

The unvented attic is insulated along the underside of the roof deck with 7 inches (R-49) of closed-cell spray foam, providing vaulted ceilings and a conditioned knee wall space for ducting.

Image

Right - This new sealed attic has 5.5 inches (R-20) of spray foam insulation along the underside of the roof deck providing a conditioned attic space for the heating and cooling ducts.

Right - This new sealed attic has 5.5 inches (R-20) of spray foam insulation along the underside of the roof deck providing a conditioned attic space for the heating and cooling ducts.

Image

Encapsulated Ducts

Guide

Guide that illustrates how and when to encapsulate ductwork in unconditioned attics, increasing the R-value of duct insulation, mitigating condensation issues, and reducing air leakage.

Diagram of buried ducts

Image

Burried and encapsulated ducts in a ceiling plane

Image

Encapsulated ducts are sprayed with ccSPF in an unconditioned attic

Encapsulated ducts are sprayed with ccSPF in an unconditioned attic

Image

Wrong: Ducts are held from the rafters with strapping and a large beam prevents ducts from properly lying on the ceiling plane

Wrong: Ducts are held from the rafters with strapping and a large beam prevents ducts from properly lying on the ceiling plane

Image

Compact Buried Ducts in a Hot-Humid Climate House

Reference

Report on heating and cooling air-distribution ducts that are insulated, installed close to the ceiling in a vented attic and covered with attic insulation to minimize energy loss.

Raised ceiling duct chase installation technique

Raised ceiling duct chase installation technique

Image

Measure Guideline: Buried and/or Encapsulated Ducts

Reference

Project discussing buried or encapsulated ducts and their pros and cons.

Design Options for Locating Ducts within Conditioned Space

Design Options for Locating Ducts within Conditioned Space

Presentation

Presentation with technical training covering several possible approaches to locating ducts within the home’s air and thermal barriers, and then dig into design considerations and details for the spray foam encapsulation approach.

Wrong: Duct is hung between truss members by strapping and not buried

Wrong: Duct is hung between truss members by strapping and not buried

Image

Duct boots and other ceiling penetrations are air-sealed using spray foam

Duct boots and other ceiling penetrations are air-sealed using spray foam

Image

Right: Ductwork is installed in direct contact with lower truss cords. In this picture the main trunk is laying on the truss cords and branch ducts are temporarily held with strapping across truss cords. Ducts are well sealed with mastic

Right: Ductwork is installed in direct contact with lower truss cords. In this picture the main trunk is laying on the truss cords and branch ducts are temporarily held with strapping across truss cords. Ducts are well sealed with mastic

Image

Install wood framing cross pieces in the attic rafter bays on each side of the duct chase

Install wood framing cross pieces in the attic rafter bays on each side of the duct chase

Image