Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 193 - 213 of 213 results:

Image:

Wrong – A visible gap in the insulated sheathing introduces unwanted outside air, creating a thermal bypass and encouraging convective air flow

Wrong – A visible gap in the insulated sheathing introduces unwanted outside air, creating a thermal bypass and encouraging convective air flow
Image:

Wrong – Conventional T-post detail is extremely difficult to insulate and usually doesn't happen

Wrong – Conventional T-post detail is extremely difficult to insulate and usually doesn't happen
Image:

Wrong – Either this tape was not pressed down firmly or the surface was wet or dirty so the tape is not sticking properly even during construction.

Wrong – Either this tape was not pressed down firmly or the surface was wet or dirty so the tape is not sticking properly even during construction.
Image:

Wrong – Excessive and structurally unnecessary framing at door

Wrong – Excessive and structurally unnecessary framing at door
Image:

Wrong – Excessive framing and improper spacing of studs

Wrong – Excessive framing and improper spacing of studs
Image:

Wrong – Excessive framing will not allow corner to be insulated

Wrong – Excessive framing will not allow corner to be insulated
Image:

Wrong – Framing does not allow corner to be insulated

Wrong – Framing does not allow corner to be insulated
Image:

Wrong – Framing does not allow corner to be insulated

Wrong – Framing does not allow corner to be insulated
Image:

Wrong – Framing does not allow corner to be insulated

Wrong – Framing does not allow corner to be insulated
Image:

Wrong – If the insulated sheathing will serve as an air barrier and drainage plane, any cuts and seams must be taped or sealed.

Wrong – If the insulated sheathing will serve as an air barrier and drainage plane, any cuts and seams must be taped or sealed.
Image:

Wrong – Insulated sheathing seams should align with framing members

Wrong – Insulated sheathing seams should align with framing members
Image:

Wrong – Insulation will not be aligned with air barrier

Wrong – Insulation will not be aligned with air barrier
Image:

Wrong – No air barrier installed between the walls and a larger gap between the walls that needs sealing

Wrong – No air barrier installed between the walls and a larger gap between the walls that needs sealing
Image:

Wrong – Rigid insulation is being installed without cap nails

Wrong – Rigid insulation is being installed without cap nails
Image:

Wrong – Slab insulation does not extend to the top of the slab

Wrong – Slab insulation does not extend to the top of the slab
Image:

Wrong – Slab insulation does not extend to the top of the slab

Wrong – Slab insulation does not extend to the top of the slab
Image:

Wrong – The framing and wind baffle installation will not allow for required insulation depth.

Wrong – The framing and wind baffle installation will not allow for required insulation depth.
Image:

Wrong – The framing will not allow for required insulation depth.

Wrong – The framing will not allow for required insulation depth.
Image:

Wrong – This second-story floor plan has red lines that indicate openings from the attic into the interstitial floor space

Wrong – This second-story floor plan has red lines that indicate openings from the attic into the interstitial floor space
Image:

Wrong – When insulated sheathing is installed correctly, you should not see daylight. Nail holes were also left unplugged.

Wrong – When insulated sheathing is installed correctly, you should not see daylight. Nail holes were also left unplugged.
Image:

Wrong – Window has additional non-structural king stud

Wrong – Window has additional non-structural king stud