Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 1177 - 1200 of 1231 results:

Image:

Wrong - The basement blanket insulation is loosely attached to the interior of the basement wall, does not cover the entire wall, is not sealed at the edges, and is not installed over rigid foam that covers the entire surface of the foundation walls.

Wrong - The basement blanket insulation is loosely attached to the interior of the basement wall, does not cover the entire wall, is not sealed at the edges, and is not installed over rigid foam that covers the entire surface of the foundation walls.
Image:

Wrong - The fiberglass blanket insulation has no perforated vapor retarder, does not cover the entire basement wall, is not sealed at the edges, and is not installed over rigid foam.

Wrong - The fiberglass blanket insulation has no perforated vapor retarder, does not cover the entire basement wall, is not sealed at the edges, and is not installed over rigid foam.
Image:

Wrong - The roof insulation panels for this building were not installed in multiple layers with joints offset. The snow melt pattern shows thermal bypasses at the insulation panel joints.

Wrong - The roof insulation panels for this building were not installed in multiple layers with joints offset. The snow melt pattern shows thermal bypasses at the insulation panel joints.
Image:

Wrong - This attic access hatch cover is not insulated

Wrong - This attic access hatch cover is not insulated
Image:

Wrong - This plastic-covered blanket insulation is not perforated, does not cover the entire basement wall, is not sealed at the edges, and is not installed over rigid foam.

Wrong - This plastic-covered blanket insulation is not perforated, does not cover the entire basement wall, is not sealed at the edges, and is not installed over rigid foam.
Image:

Wrong - Unfaced fiberglass batt is not properly cut to fit in all the stud bays.

Wrong - Unfaced fiberglass batt is not properly cut to fit in all the stud bays.
Image:

Wrong - Wall cavities behind shower are not completely filled with insulation and are lacking the solid interior air barrier.

Wrong - Wall cavities behind shower are not completely filled with insulation and are lacking the solid interior air barrier.
Image:

Wrong - Wood-to-wood and wood-to-subfloor seams not caulked or poorly caulked.

Wrong - Wood-to-wood and wood-to-subfloor seams not caulked or poorly caulked.
Image:

Wrong – A clothes dryer that vents to the crawlspace can contribute moisture to the crawlspace; this can result in damp, molding, and rotting insulation

Wrong – A clothes dryer that vents to the crawlspace can contribute moisture to the crawlspace; this can result in damp, molding, and rotting insulation
Image:

Wrong – A visible gap in the insulated sheathing introduces unwanted outside air, creating a thermal bypass and encouraging convective air flow

Wrong – A visible gap in the insulated sheathing introduces unwanted outside air, creating a thermal bypass and encouraging convective air flow
Image:

Wrong – Attic access panel does not have an insulation cover installed

Wrong – Attic access panel does not have an insulation cover installed
Image:

Wrong – Compression and misalignment because insulation is not split around plumbing

Wrong – Compression and misalignment because insulation is not split around plumbing
Image:

Wrong – Compression and misalignment because insulation is not split around wires

Wrong – Compression and misalignment because insulation is not split around wires
Image:

Wrong – Conventional T-post detail is extremely difficult to insulate and usually doesn't happen

Wrong – Conventional T-post detail is extremely difficult to insulate and usually doesn't happen
Image:

Wrong – Design walls so that windows are positioned to fit regularly spaced studs so less additional studs are needed.

Wrong – Design walls so that windows are positioned to fit regularly spaced studs so less additional studs are needed.
Image:

Wrong – Don’t use nails to fasten poly vapor barrier around flex ducts; it will allow moist air to reach the ducts where it could condense and ruin the insulation.

Wrong – Don’t use nails to fasten poly vapor barrier around flex ducts; it will allow moist air to reach the ducts where it could condense and ruin the insulation.
Image:

Wrong – Drop down stairs do not have insulation cover installed

Wrong – Drop down stairs do not have insulation cover installed
Image:

Wrong – Either this tape was not pressed down firmly or the surface was wet or dirty so the tape is not sticking properly even during construction.

Wrong – Either this tape was not pressed down firmly or the surface was wet or dirty so the tape is not sticking properly even during construction.
Image:

Wrong – Excessive framing will not allow corner to be insulated

Wrong – Excessive framing will not allow corner to be insulated
Image:

Wrong – Framing does not allow corner to be insulated

Wrong – Framing does not allow corner to be insulated
Image:

Wrong – Framing does not allow corner to be insulated

Wrong – Framing does not allow corner to be insulated
Image:

Wrong – Framing does not allow corner to be insulated

Wrong – Framing does not allow corner to be insulated
Image:

Wrong – If the insulated sheathing will serve as an air barrier and drainage plane, any cuts and seams must be taped or sealed.

Wrong – If the insulated sheathing will serve as an air barrier and drainage plane, any cuts and seams must be taped or sealed.
Image:

Wrong – Insulated sheathing seams should align with framing members

Wrong – Insulated sheathing seams should align with framing members