Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 577 - 600 of 698 results:

Image:

The universal retrofit foundation plate is used to connect the concrete foundation to the sill plate as part of a seismic retrofit

The universal retrofit foundation plate is used to connect the concrete foundation to the sill plate as part of a seismic retrofit
Image:

There is 6 mil. polyethylene sheeting installed and sealed in the crawlspace

There is 6 mil. polyethylene sheeting installed and sealed in the crawlspace
Image:

There is no polyethylene sheeting installed between the ground and the slab

There is no polyethylene sheeting installed between the ground and the slab
Image:

There is no polyethylene sheeting installed in the crawlspace

There is no polyethylene sheeting installed in the crawlspace
Image:

There is no polyethylene sheeting installed in the crawlspace

There is no polyethylene sheeting installed in the crawlspace
Image:

There is polyethylene sheeting installed to provide a capillary break between the ground and slab

There is polyethylene sheeting installed to provide a capillary break between the ground and slab
Image:

These below-grade walls are insulated along the exterior with R-5 of bug-resistant high-density rigid fiberglass insulation installed over damproofing.

These below-grade walls are insulated along the exterior with R-5 of bug-resistant high-density rigid fiberglass insulation installed over damproofing.
Image:

This 4-inch layer of rigid foam insulation (R-20) will be sandwiched between two layers of concrete poured on site for a highly insulated foundation wall.

This 4-inch layer of rigid foam insulation (R-20) will be sandwiched between two layers of concrete poured on site for a highly insulated foundation wall.
Image:

This assembly can be used to thermally isolate heated or partially heated garages with slab foundations from the exterior in multifamily row houses/townhouses in IECC Climate Zones 3 and higher.

This assembly can be used to thermally isolate heated or partially heated garages with slab foundations from the exterior in multifamily row houses/townhouses in IECC Climate Zones 3 and higher.
Image:

This basement is insulated on the exterior with rigid foam over dampproofing, with granular backfill and footing drains to facilitate drainage away from the foundation, a termite shield to protect from pests, and cellular PVC to protect the rigid foam.

This basement is insulated on the exterior with rigid foam over dampproofing, with granular backfill and footing drains to facilitate drainage away from the foundation, a termite shield to protect from pests, and cellular PVC to protect the rigid foam.
Image:

This breakaway wall design made of decay resistant lumber is compliant with the National Flood Insurance Program.

This breakaway wall design made of decay resistant lumber is compliant with the National Flood Insurance Program.
Image:

This building foundation has a drainage layer located on the exterior of the waterproofing membrane.

This building foundation has a drainage layer located on the exterior of the waterproofing membrane.
Image:

This coastal home was built on a flood-resistant pier foundation using hurricane- and moisture-resistant expanded polystyrene and steel wall panels and hurricane strapping.

This coastal home was built on a flood-resistant pier foundation using hurricane- and moisture-resistant expanded polystyrene and steel wall panels and hurricane strapping.
Image:

This concrete block foundation cracked due to lack of steel rebar reinforcement.

This concrete block foundation cracked due to lack of steel rebar reinforcement.
Image:

This exterior insulated slab-on-grade monolithic grade beam foundation is protected from pests by termite shield at the sill plate, borate-treated framing, flashing at end of wall insulation, brick veneer over slab-edge insulation, and rock ground cover.

This exterior insulated slab-on-grade monolithic grade beam foundation is protected from pests by termite shield at the sill plate, borate-treated framing, flashing at end of wall insulation, brick veneer over slab-edge insulation, and rock ground cover.
Image:

This exterior wall retrofit permits drying to the exterior of a sill plate installed on an untreated flat foundation wall

This exterior wall retrofit permits drying to the exterior of a sill plate installed on an untreated flat foundation wall
Image:

This exterior wall retrofit permits drying to the exterior of a sill plate installed on an untreated irregular foundation wall

This exterior wall retrofit permits drying to the exterior of a sill plate installed on an untreated irregular foundation wall
Image:

This home constructed in a V Zone in Bolivar Peninsula, Texas, had the bottom beam of the lowest floor at the BFE (dashed line) but the estimated wave crest during Hurricane Ike was 3 to 4 feet higher (solid line).

This home constructed in a V Zone in Bolivar Peninsula, Texas, had the bottom beam of the lowest floor at the BFE (dashed line) but the estimated wave crest during Hurricane Ike was 3 to 4 feet higher (solid line).
Image:

This home has a cost-saving shallow frost-protected foundation that uses rigid foam laid vertically at the base of the 16-inch-deep footers to protect the foundation from frost damage.

This home has a cost-saving shallow frost-protected foundation that uses rigid foam laid vertically at the base of the 16-inch-deep footers to protect the foundation from frost damage.
Image:

This home is heated with in-floor hydronic radiant heating tubes that were installed on top of the R-20 rigid foam under-slab insulation.

This home is heated with in-floor hydronic radiant heating tubes that were installed on top of the R-20 rigid foam under-slab insulation.
Image:

This home was elevated above the Design Flood Elevation and the pre-existing first story became the second story.

This home was elevated above the Design Flood Elevation and the pre-existing first story became the second story.
Image:

This home’s exterior walls include Larsen trusses, 9-inch I-joists attached through exterior sheathing to wall studs creating a 9-inch wall cavity that was filled with blown insulation and forms extra deep windowsills.

This home’s exterior walls include Larsen trusses, 9-inch I-joists attached through exterior sheathing to wall studs creating a 9-inch wall cavity that was filled with blown insulation and forms extra deep windowsills.
Image:

This house design in the Hot-Humid climate uses a slab foundation, masonry walls, and an Exterior Insulation Finish System (EIFS) cladding.

This house design in the Hot-Humid climate uses a slab foundation, masonry walls, and an Exterior Insulation Finish System (EIFS) cladding.
Image:

This house slid off its post-and-pier foundation in an earthquake.

This house slid off its post-and-pier foundation in an earthquake.