Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 1 - 24 of 430 results:

Image:

A concrete slab floor can be elevated above local grade as a strategy to prevent flood damage.

A concrete slab floor can be elevated above local grade as a strategy to prevent flood damage.
Image:

A concrete slab-on-grade foundation with exterior insulation, which can be elevated above the local grade as a flood-prevention strategy.

A concrete slab-on-grade foundation with exterior insulation, which can be elevated above the local grade as a flood-prevention strategy.
Image:

A damp crawlspace

A damp crawlspace
Image:

A floor cavity between the first and second floor can provide a conditioned space for HVAC ducts if the rim joists are insulated and air sealed, if sufficient space is available, and if open-web floor joists are used

A floor cavity between the first and second floor can provide a conditioned space for HVAC ducts if the rim joists are insulated and air sealed, if sufficient space is available, and if open-web floor joists are used
Image:

A push button operates the on-demand hot water circulation pump in this master bathroom.

A push button operates the on-demand hot water circulation pump in this master bathroom.
Image:

A raised wood pier foundation can raise the subfloor above the design flood elevation.

A raised wood pier foundation can raise the subfloor above the design flood elevation.
Image:

A typical older masonry home with unreinforced brick walls, wood floors, and a wood roof

A typical older masonry home with unreinforced brick walls, wood floors, and a wood roof
Image:

A vapor barrier was installed on the floor of this crawlspace and extended up the walls then the foundation walls were covered with rigid foam.

A vapor barrier was installed on the floor of this crawlspace and extended up the walls then the foundation walls were covered with rigid foam.
Image:

A water-resistant backer board is installed behind the shower tiles.

A water-resistant backer board is installed behind the shower tiles.
Image:

A WaterSense-labeled showerhead is tested to ensure a flow of ≤ 0.35 gallons in a 10-second test.

A WaterSense-labeled showerhead is tested to ensure a flow of ≤ 0.35 gallons in a 10-second test.
Image:

Adding air-sealing and rigid foam insulation at the wall-to-overhanging floor juncture at the outside corner of an existing home

Adding air-sealing and rigid foam insulation at the wall-to-overhanging floor juncture at the outside corner of an existing home
Image:

After setting precast concrete basement walls on an 8-inch bed of trap rock, this builder sprayed 2 inches of closed-cell spray foam directly onto the ground then laid piping for radiant floor heating before pouring the concrete floor slab.

After setting precast concrete basement walls on an 8-inch bed of trap rock, this builder sprayed 2 inches of closed-cell spray foam directly onto the ground then laid piping for radiant floor heating before pouring the concrete floor slab.
CAD File:

Air barrier at garage band joist - 1 1/2 inch rigid insulation with 2x4 sleepers

Preview Image
Air barrier at garage band joist - 1 1/2 inch rigid insulation with 2x4 sleepers
CAD File:

Air barrier at garage band joist - 1 inch rigid insulation with 1x3 wood furring

Preview Image
Air barrier at garage band joist - 1 inch rigid insulation with 1x3 wood furring
CAD File:

Air barrier at garage band joist - 1 inch rigid insulation with 2x2 wood furring

Preview Image
Air barrier at garage band joist - 1 inch rigid insulation with 2x2 wood furring
Image:

Air seal and insulate around the exhaust fan with a rigid foam box

Air seal and insulate around the exhaust fan with a rigid foam box
Image:

Air seal around kitchen and bathroom exhaust fans to keep conditioned air from leaking into unconditioned space.

Air seal around kitchen and bathroom exhaust fans to keep conditioned air from leaking into unconditioned space.
Image:

Air seal the floor above an unconditioned basement or crawlspace and make sure floor insulation is in full contact with the underside of the subfloor.

Air seal the floor above an unconditioned basement or crawlspace and make sure floor insulation is in full contact with the underside of the subfloor.
Image:

Air seal the top, bottom, and sides of a cantilevered floor cavity and ensure that insulation is in full contact with all sides without voids.

Air seal the top, bottom, and sides of a cantilevered floor cavity and ensure that insulation is in full contact with all sides without voids.
CAD File:

Air sealing at corner vertical bathtub chase

Preview Image
Air sealing at corner vertical bathtub chase
CAD File:

Air sealing behind shower with cavity rigid insulation

Preview Image
Air sealing behind shower with cavity rigid insulation
CAD File:

Air sealing behind shower with thin-profile sheathing

Preview Image
Air sealing behind shower with thin-profile sheathing
CAD File:

Air sealing behind tub with cavity rigid insulation

Preview Image
Air sealing behind tub with cavity rigid insulation
CAD File:

Air sealing behind tub with thin-profile sheathing - section

Preview Image
Air sealing behind tub with thin-profile sheathing - section