Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 793 - 816 of 941 results:

Image:

This exhaust fan duct opens into the attic rather than exiting through the roof and mold has begun to form on the underside of the deck sheathing and on the rafter due to the moist air exiting the duct

This exhaust fan duct opens into the attic rather than exiting through the roof and mold has begun to form on the underside of the deck sheathing and on the rafter due to the moist air exiting the duct
Image:

This exterior insulated slab-on-grade monolithic grade beam foundation is protected from pests by termite shield at the sill plate, borate-treated framing, flashing at end of wall insulation, brick veneer over slab-edge insulation, and rock ground cover.

This exterior insulated slab-on-grade monolithic grade beam foundation is protected from pests by termite shield at the sill plate, borate-treated framing, flashing at end of wall insulation, brick veneer over slab-edge insulation, and rock ground cover.
Image:

This finished retrofit installation of radiant barrier in attic shows the air spaces at the soffit and ridge to promote attic ventilation

This finished retrofit installation of radiant barrier in attic shows the air spaces at the soffit and ridge to promote attic ventilation
Image:

This floor assembly above a vented crawlspace controls vapor and heat transmission by using foil-faced isocyanurate rigid foam insulation installed underneath the floor joists and fiberglass insulation in the floor joist cavities

This floor assembly above a vented crawlspace controls vapor and heat transmission by using foil-faced isocyanurate rigid foam insulation installed underneath the floor joists and fiberglass insulation in the floor joist cavities
Image:

This home has heat loss through the roof, leading to ice dam formation and structural issues during winter months.

This home has heat loss through the roof, leading to ice dam formation and structural issues during winter months.
Image:

This home uses light-colored standard paints and finishes on siding and roofing materials to reduce cooling loads without adding material cost.

This home uses light-colored standard paints and finishes on siding and roofing materials to reduce cooling loads without adding material cost.
Image:

This home was designed with continuous roof vents and few roof penetrations, allowing more room for the solar shingles that integrate with the asphalt shingles installed to meet IBHS Fortified Roof criteria for increased resistance to high winds and rain

This home was designed with continuous roof vents and very few roof penetrations, allowing more room for the solar shingles that integrate with the asphalt shingles installed to meet IBHS Fortified Roof criteria for increased resistance to high winds and wind-driven rain.
Image:

This home’s south-facing roof provides adequate space for both a solar electric system and solar thermal hot water system.

This home’s south-facing roof provides adequate space for both a solar electric system and solar thermal hot water system.
Image:

This house design in the Hot-Humid climate uses a slab foundation, masonry walls, and an Exterior Insulation Finish System (EIFS) cladding.

This house design in the Hot-Humid climate uses a slab foundation, masonry walls, and an Exterior Insulation Finish System (EIFS) cladding.
Image:

This house was designed with half of the basement above grade, allowing 36-inch-tall windows for egress and daylight on both sides of the house.

This house was designed with half of the basement above grade, allowing 36-inch-tall windows for egress and daylight on both sides of the house.
Image:

This is a soffit vent; it provides ventilation for a vented attic

This is a soffit vent; it provides ventilation for a vented attic
Image:

This parapet wall has metal blocking and spray foam in the wall at the level of the roof insulation; this limits airflow within or through the wall cavity.

This parapet wall has metal blocking and spray foam in the wall at the level of the roof insulation; this limits airflow within or through the wall cavity.
Image:

This parapet wall has no blocking to prevent the convection of cold air through the insulation, which significantly reduces the effectiveness of the insulation.

This parapet wall has no blocking to prevent the convection of cold air through the insulation, which significantly reduces the effectiveness of the insulation.
Image:

This roof is hurricane proofed with a coated insulated OSB deck sheathing that is caulked and taped at all seams with a water-resistant tape, then fully covered with a peel-and-stick membrane, and asphalt shingles.

This roof is hurricane proofed with a coated insulated OSB deck sheathing that is caulked and taped at all seams with a water-resistant tape, then fully covered with a peel-and-stick membrane, and asphalt shingles.
Image:

This roof was constructed to meet the IBHS Fortified Roof standard by sealing the decking seams with flashing tape, installing synthetic roof underlayment secured with metal drip edge and nailed every six inches, and using self-adhered starter shingles.

This roof was constructed to meet the IBHS Fortified Roof standard by sealing the decking seams with flashing tape, installing synthetic roof underlayment secured with metal drip edge and nailed every six inches, and using self-adhered starter shingles.
Image:

This roof was insulated above the roof deck with 5.5 inches (R-38.5) of closed-cell spray foam.

This roof was insulated above the roof deck with 5.5 inches (R-38.5) of closed-cell spray foam.
Image:

This search for metal roofing products on the CRRC Rated Roof Products Directory highlights the initial and 3-year aged SRI values for each product

This search for metal roofing products on the CRRC Rated Roof Products Directory highlights the initial and 3-year aged SRI values for each product
Image:

This simplified decision tree can help a homeowner or contractor assess how appropriate a cool roof or wall will be for a particular home

This simplified decision tree can help a homeowner or contractor assess how appropriate a cool roof or wall will be for a particular home
Image:

This step flashing was installed over, not under, the siding, so water is getting behind the step flashing and rotting the siding; the house was also badly designed with a window frame that touches the intersecting roof, inviting interior water damage.

This step flashing was installed over, not under, the siding, so water is getting behind the step flashing and rotting the siding; the house was also badly designed with a window frame that touches the intersecting roof, inviting interior water damage.
Image:

This sump pump is installed correctly

This sump pump is installed correctly
Image:

Three inches of closed-cell spray foam (R-19) and 7.5 inches (R-28) of open-cell spray foam was installed below the roof sheathing in this cathedral ceiling.

Three inches of closed-cell spray foam (R-19) and 7.5 inches (R-28) of open-cell spray foam was installed below the roof sheathing in this cathedral ceiling.
Image:

Three locations and methods for installing a roof deck radiant barrier in new construction

Three locations and methods for installing a roof deck radiant barrier in new construction
Image:

To keep water out, flashing should be integrated with the house wrap, siding, and shingles or roof tiles.

To keep water out, flashing should be integrated with the house wrap, siding, and shingles or roof tiles.
Image:

To reduce the risk of condensation on the interior of the roof sheathing in cold weather, the ratio of exterior (above-deck) insulation must be increased as a percent of total attic insulation as outside temperature decreases

To reduce the risk of condensation on the interior of the roof sheathing in cold weather, the ratio of exterior (above-deck) insulation must be increased as a percent of total attic insulation as outside temperature decreases