Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 601 - 624 of 935 results:

Image:

Right – The framing allows for required insulation depth.

Right – The framing allows for required insulation depth.
Image:

Right – The framing around the window is thoroughly flashed with liquid flashing.

Right – The framing around the window is thoroughly flashed with liquid flashing.
Image:

Right – The knee wall is properly insulated and air sealed.

Right – The knee wall is properly insulated and air sealed.
Image:

Right – The rough opening around the window has been filled with low-expansion foam to air seal.

Right – The rough opening around the window has been filled with low-expansion foam to air seal.
Image:

Right – The rough opening around window has been filled with backer-rod to air seal.

Right – The rough opening around window has been filled with backer-rod to air seal.
Image:

Right – The seams and edges of the house wrap have been taped but house wrap should have been extended up to porch roof and care should be taken to press the tape with a roller to activate tape adhesion.

Right – The seams and edges of the house wrap have been taped but house wrap should have been extended up to porch roof and care should be taken to press the tape with a roller to activate tape adhesion.
Image:

Right – The sheathing and window sills are sealed with a paint-on flashing.

Right – The sheathing and window sills are sealed with a paint-on flashing.
Image:

Right – The top plate-to-dry wall seams of the interior walls are sealed from the attic.

Right – The top plate-to-dry wall seams of the interior walls are sealed from the attic.
Image:

Right – There is flashing installed along the top of the window and the water-resistant barrier is layered over to create a complete drainage system

Right – There is flashing installed along the top of the window and the water-resistant barrier is layered over to create a complete drainage system
Image:

Right – thermal mass walls, small windows, and recessed porch and trees on the south side of this southwest home help to minimize solar heat gain.

Right – thermal mass walls, small windows, and recessed porch and trees on the south side of this southwest home help to minimize solar heat gain.
Image:

Right – This aluminum jalousie window provides solar control while allowing view and ventilation.

Right – This aluminum jalousie window provides solar control while allowing view and ventilation.
Image:

Right – This attic knee wall and the floor joist cavity openings beneath it are being sealed and insulated with spray foam.

Right – This attic knee wall and the floor joist cavity openings beneath it are being sealed and insulated with spray foam.
Image:

Right – this commercial building employs good techniques to resist solar heat gain: awnings and pergolas over windows, recessed windows and entryways, deep tinting on glass, and shade plants.

Right – this commercial building employs good techniques to resist solar heat gain: awnings and pergolas over windows, recessed windows and entryways, deep tinting on glass, and shade plants.
Image:

Right – This crawlspace window was completely sealed off on the inside and outside with air barrier and water-proof materials and the window well was filled in to an above-grade height to prevent bulk water from entering the crawlspace

Right – This crawlspace window was completely sealed off on the inside and outside with air barrier and water-proof materials and the window well was filled in to an above-grade height to prevent bulk water from entering the crawlspace
Image:

Right – This National Fenestration Rating Council (NFRC) label shows the insulation U-Factor, solar heat gain coefficient, visible transmittance, and condensation resistance for this triple-pane window.

Right – This National Fenestration Rating Council (NFRC) label shows the insulation U-Factor, solar heat gain coefficient, visible transmittance, and condensation resistance for this triple-pane window.
Image:

Right – This prototype home incorporates vertical trellises and retractable exterior blinds to control solar heat gain.

Right – This prototype home incorporates vertical trellises and retractable exterior blinds to control solar heat gain.
Image:

Right – Top and bottom plates were installed prior to backing and insulation.

Right – Top and bottom plates were installed prior to backing and insulation.
Image:

Right – Types of Storm Shutters for Windows

Right – Types of Storm Shutters for Windows
Image:

Right – Verify continuous rigid insulation is installed

Right – Verify continuous rigid insulation is installed
Image:

Right – Verify single member headers with insulation on one side are installed

Right – Verify single member headers with insulation on one side are installed
Image:

Right – Verify SIP headers are installed

Right – Verify SIP headers are installed
Image:

Right – Verify two member headers with rigid insulation between are installed

Right – Verify two member headers with rigid insulation between are installed
Image:

Right – Wind baffle installation maintains necessary code clearance between baffle and roof deck

Right – Wind baffle installation maintains necessary code clearance between baffle and roof deck
Image:

Right – Window framing has appropriate number of king studs

Right – Window framing has appropriate number of king studs