Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 577 - 600 of 622 results:

Image:

Wrong - Glazing failed due to windborne debris during a hurricane.

Wrong - Glazing failed due to windborne debris during a hurricane.
Image:

Wrong - House wrap and flashing tape are poorly installed allowing water to get into the gaps behind flashing tape.

Wrong - House wrap and flashing tape are poorly installed allowing water to get into the gaps behind flashing tape.
Image:

Wrong - House wrap tape is not fully adhered at seam and flashing tape is missing from window head, jamb, and corner above window.

Wrong - House wrap tape is not fully adhered at seam and flashing tape is missing from window head, jamb, and corner above window.
Image:

Wrong - Insulation beneath window is compressed and there are more support studs than necessary to left of window.

Wrong - Insulation beneath window is compressed and there are more support studs than necessary to left of window.
Image:

Wrong - Pan flashing is poorly adhered on all 4 windows.

Wrong - Pan flashing is poorly adhered on all 4 windows.
Image:

Wrong - Stucco has rotted and cracked above a window because of water damage due to lack of proper flashing and drainage.

Wrong - Stucco has rotted and cracked above a window because of water damage due to lack of proper flashing and drainage.
Image:

Wrong - Tape flashing around the window is poorly installed.

Wrong - Tape flashing around the window is poorly installed.
Image:

Wrong - Tape flashing is missing around window frame.

Wrong - Tape flashing is missing around window frame.
Image:

Wrong - The flashing tape is poorly adhered to the window.

Wrong - The flashing tape is poorly adhered to the window.
Image:

Wrong - The IRC requires that kitchen exhaust ducts terminate outside, at least 3 feet from operable windows.

Wrong - The IRC requires that kitchen exhaust ducts terminate outside, at least 3 feet from operable windows.
Image:

Wrong - The sill flashing is not completely adhered to the window.

Wrong - The sill flashing is not completely adhered to the window.
Image:

Wrong - The window lying on the ground was protected by a shutter but the shutter was attached to the window frame, rather than directly to the wall framing.

Wrong - The window lying on the ground was protected by a shutter but the shutter was attached to the window frame, rather than directly to the wall framing.
Image:

Wrong - The window needs pan, head, and jamb flashing.

Wrong - The window needs pan, head, and jamb flashing.
Image:

Wrong - There is no step flashing along the base of the gable and the right window is missing sill trim.

Wrong - There is no step flashing along the base of the gable and the right window is missing sill trim.
Image:

Wrong - this building provides no overhangs, minimal window shading, and clear window glass resulting in high solar heat gain.

Wrong - this building provides no overhangs, minimal window shading, and clear window glass resulting in high solar heat gain.
Image:

Wrong - This IR image is showing a lack of air-sealing is allowing cold air to enter the home around the windows and at the base of the wall.

Wrong - This IR image is showing a lack of air-sealing is allowing cold air to enter the home around the windows and at the base of the wall.
Image:

Wrong - This IR image shows air leakage around a window.

Wrong - This IR image shows air leakage around a window.
Image:

Wrong - Water has gotten behind the paint, possibly due to lack of window flashing, leading to blistering.

Wrong - Water has gotten behind the paint, possibly due to lack of window flashing, leading to blistering.
Image:

Wrong - Water has leaked into the window assembly and has not been able to drain out, possibly due to blocked weep holes; thus, mold and moss are growing in the window assembly.

Wrong - Water has leaked into the window assembly and has not been able to drain out, possibly due to blocked weep holes; thus, mold and moss are growing in the window assembly.
Image:

Wrong - Window is missing pan flashing under sill and tape flashing at jamb end sill.

Wrong - Window is missing pan flashing under sill and tape flashing at jamb end sill.
Image:

Wrong - Window sill trim was too tall for window frame and was poorly modified in an attempt to provide drainage out of the window.

Wrong - Window sill trim was too tall for window frame and was poorly modified in an attempt to provide drainage out of the window.
Image:

Wrong – A clothes dryer that vents to the crawlspace can contribute moisture to the crawlspace; this can result in damp, molding, and rotting insulation

Wrong – A clothes dryer that vents to the crawlspace can contribute moisture to the crawlspace; this can result in damp, molding, and rotting insulation
Image:

Wrong – A poorly sealed window and window well allow bulk water to enter the crawlspace from ground that slopes toward the structure

Wrong – A poorly sealed window and window well allow bulk water to enter the crawlspace from ground that slopes toward the structure
Image:

Wrong – Excessive and structurally unnecessary framing at door

Wrong – Excessive and structurally unnecessary framing at door