Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 529 - 552 of 617 results:

Image:

Water heater is elevated to a new location above the Base Flood Elevation

Water heater is elevated to a new location above the Base Flood Elevation
Image:

WaterSense approved toilet

WaterSense approved toilet
Image:

Well sealed duct lifted into raised ceiling chase

Well sealed duct lifted into raised ceiling chase
Video:

Wet Floodproofing

Image:

When wrapping metal ducts with insulation allow two inches of overlap and staple along the seam with outward clinching staples

When wrapping metal ducts with insulation allow two inches of overlap and staple along the seam with outward clinching staples
Image:

Wide saddle support provides sturdy support for the turn without pinching the flex duct

Wide saddle support provides sturdy support for the turn without pinching the flex duct
Image:

Wrong - Code requires a kitchen exhaust fan duct to be a smooth metal duct (galvanized steel, stainless steel, or copper) and to terminate outside, not in an attic or crawlspace.

Wrong - Code requires a kitchen exhaust fan duct to be a smooth metal duct (galvanized steel, stainless steel, or copper) and to terminate outside, not in an attic or crawlspace.
Image:

Wrong - Duct insulation and vapor barrier do not cover all of the flex duct.

Wrong - Duct insulation and vapor barrier do not cover all of the flex duct.
Image:

Wrong - Duct insulation and vapor barrier do not cover all of the flex duct.

Wrong - Duct insulation and vapor barrier do not cover all of the flex duct.
Image:

Wrong - Duct juncture seam should be sealed with metal tape or mastic.

Wrong - Duct juncture seam should be sealed with metal tape or mastic.
Image:

Wrong - Duct seams were sealed with regular duct tape which has failed to hold; seams should have been sealed with mastic or approved metal tape.

Wrong - Duct seams were sealed with regular duct tape which has failed to hold; seams should have been sealed with mastic or approved metal tape.
Image:

Wrong - Duct-duct joint is not sealed.

Wrong - Duct-duct joint is not sealed.
Image:

Wrong - Flex duct insulation is overly compressed in 3 ways; Zip-tie fastener is over the insualtion not under the insulation at the duct boot collar, duct turning radius is too tight, and support strap is too tight.

Wrong - Flex duct insulation is overly compressed in 3 ways; Zip-tie fastener is over the insualtion not under the insulation at the duct boot collar, duct turning radius is too tight, and support strap is too tight.
Image:

Wrong - Flex duct is improperly attached and sealed to duct boot.

Wrong - Flex duct is improperly attached and sealed to duct boot.
Image:

Wrong - Flex duct is prohibited for kitchen exhaust fans by the IRC.

Wrong - Flex duct is prohibited for kitchen exhaust fans by the IRC.
Image:

Wrong - Flex duct pinched by bracing

Wrong - Flex duct pinched by bracing
Image:

Wrong - Flex duct resting on floor compressing insulation and causing condensation

Wrong - Flex duct resting on floor compressing insulation and causing condensation
Image:

Wrong - Flex duct with sharp turn restricting air flow

Wrong - Flex duct with sharp turn restricting air flow
Image:

Wrong - Flex ducts are prohibited by the IRC for kitchen exhaust and, at 28 feet, this duct is too long to be effective.

Wrong - Flex ducts are prohibited by the IRC for kitchen exhaust and, at 28 feet, this duct is too long to be effective.
Image:

Wrong - Hole in duct is not sealed and duct joint to subfloor is not sealed.

Wrong - Hole in duct is not sealed and duct joint to subfloor is not sealed.
Image:

Wrong - Hole in duct needs to be sealed.

Wrong - Hole in duct needs to be sealed.
Image:

Wrong - If this kitchen exhaust duct had been extended a few inches, at least one bend could have been eliminated.

Wrong - If this kitchen exhaust duct had been extended a few inches, at least one bend could have been eliminated.
Image:

Wrong - Kitchen exhaust ducts are prohibited from terminating within 3 feet of an operable window or near gable vents.

Wrong - Kitchen exhaust ducts are prohibited from terminating within 3 feet of an operable window or near gable vents.
Image:

Wrong - Kitchen exhaust fans must be located directly over the stove top to be effective at capturing and removing cooking pollutants.

Wrong - Kitchen exhaust fans must be located directly over the stove top to be effective at capturing and removing cooking pollutants.