Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 985 - 1008 of 1191 results:

Image:

This window header has been insulated with rigid foam and air sealed with house wrap tape and all wood-to-wood joints are caulked.

This window header has been insulated with rigid foam and air sealed with house wrap tape and all wood-to-wood joints are caulked.
Image:

Thorough air sealing is one way the Habitat for Humanity affiliate in Loudon County, FL, improves the efficiency and weather resistance of its homes.

Thorough air sealing is one way the Habitat for Humanity affiliate in Loudon County, FL, improves the efficiency and weather resistance of its homes.
Image:

To minimize air leakage through electrical boxes, the boxes were either wrapped with fire-resistant putty (required at fire-rated walls) or wire penetrations were foamed and the boxes were caulked to the drywall.

To minimize air leakage through electrical boxes, the boxes were either wrapped with fire-resistant putty (required at fire-rated walls) or wire penetrations were foamed and the boxes were caulked to the drywall.
Image:

To prepare for a total duct test at final, cover all of the supply outlets and return inlets

To prepare for a total duct test at final, cover all of the supply outlets and return inlets
Image:

To prepare for a total duct test at rough-in, cover all of the supply outlets and return inlets

To prepare for a total duct test at rough-in, cover all of the supply outlets and return inlets
Image:

To remove old exterior caulk, use a utility knife (left) or a putty knife (right) to cut along both edges.

To remove old exterior caulk, use a utility knife (left) or a putty knife (right) to cut along both edges.
Image:

To seal a partition wall at the floor-exterior wall junction: a. install self-adhered membrane over subfloor, rim joist, and partition wall; b. construct walls of next floor, install more flashing over first flashing and up partition wall

To seal a partition wall at the floor-exterior wall junction: a. install self-adhered membrane over subfloor, rim joist, and partition wall; b. construct walls of next floor, install more flashing over first flashing and up partition wall
Video:

Total Duct Leakage Tests

Image:

Total Rater-measured duct leakage ≤ 8 CFM25 per 100 sq. ft. of conditioned area

Total Rater-measured duct leakage ≤ 8 CFM25 per 100 sq. ft. of conditioned area
Video:

Transfer Grilles (1)

Video:

Transfer Grilles (2)

Image:

Transfer grilles allow air flow between rooms

Transfer grilles allow air flow between rooms
Image:

Transfer grills and jump ducts provide pathways for air to reach the centrally located HVAC return grille, even when bedroom doors are shut.

Transfer grills and jump ducts provide pathways for air to reach the centrally located HVAC return grille, even when bedroom doors are shut.
Image:

Transom returns are installed over interior doors to provide a pathway for return air

Transom returns are installed over interior doors to provide a pathway for return air
CAD File:

Turned down concrete slab - 1 1/2 inch rigid insulation

Preview Image
Turned down concrete slab - 1 1/2 inch rigid insulation
CAD File:

Turned down concrete slab - 1 inch rigid insulation

Preview Image
Turned down concrete slab - 1 inch rigid insulation
CAD File:

Turned down concrete slab - 3/4 inch rigid insulation

Preview Image
Turned down concrete slab - 3/4 inch rigid insulation
Image:

Two pillows and two garbage bags are used to make a chimney air sealing pillow

Two pillows and two garbage bags are used to make a chimney air sealing pillow
Image:

Typical installation of a double section modular home on a pier and ground anchor foundation

Typical installation of a double section modular home on a pier and ground anchor foundation
Image:

Typically, you will remove the glass panels from the frame before installation; check the manufacturer’s instructions.

Typically, you will remove the glass panels from the frame before installation; check the manufacturer’s instructions.
Video:

Unvented Attic Insulation (1)

Video:

Unvented Attic Insulation (2)

Image:

Unvented roof assembly at eave retrofitted with rigid foam, spray foam, and a fully adhered membrane seal at the top of wall-to-roof transition

Unvented roof assembly at eave retrofitted with rigid foam, spray foam, and a fully adhered membrane seal at the top of wall-to-roof transition
Image:

Unvented roof assembly at eave retrofitted with rigid foam, spray foam, and taped top edge of existing house wrap or building paper

Unvented roof assembly at eave retrofitted with rigid foam, spray foam, and taped top edge of existing house wrap or building paper