Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 145 - 168 of 1267 results:

Image:

A manometer is used to measure pressure differentials between indoors and outdoors when testing whole-house air leakage.

A manometer is used to measure pressure differentials between indoors and outdoors when testing whole-house air leakage.
Image:

A piece of siding is used as sill extension and to provide slope in the opening for the window, which is deeper because exterior rigid foam has been added

A piece of siding is used as sill extension and to provide slope in the opening for the window, which is deeper because exterior rigid foam has been added
Image:

A putty knife is used to press caulk into a seam in the plywood sheathing.

A putty knife is used to press caulk into a seam in the plywood sheathing.
Image:

A rigid air barrier of non-paper-faced gypsum board is installed before the bathtub is installed and all seams are caulked

A rigid air barrier of non-paper-faced gypsum board is installed before the bathtub is installed and all seams are caulked
Image:

A second layer of rigid insulation is installed over the 2 in. by 4 in. retaining strip

A second layer of rigid insulation is installed over the 2 in. by 4 in. retaining strip
Image:

A sill gasket is installed under the two layers of fire-rated gypsum providing air sealing at the foundation slab in this 2-hour fire wall separating two units in a multifamily row house building

A sill gasket is installed under the two layers of fire-rated gypsum providing air sealing at the foundation slab in this 2-hour fire wall separating two units in a multifamily row house building
Image:

A sill-sealing foam gasket is placed under 8-inch plywood base and two beads of caulk air seal the 2x6 sill plate to it; two more beads of caulk will top the 2x6 which will serve as a spline for the SIP wall panel.

A sill-sealing foam gasket is placed under 8-inch plywood base and two beads of caulk air seal the 2x6 sill plate to it; two more beads of caulk will top the 2x6 which will serve as a spline for the SIP wall panel.
Image:

A technician assembles the spray sealant injection system to seal HVAC ducts from the inside

A technician assembles the spray sealant injection system to seal HVAC ducts from the inside
Image:

A technician conducts a duct blaster test

A technician conducts a duct blaster test
Image:

A weatherstripping gasket is installed on the framing that the crawlspace hatch panel rests on.

A weatherstripping gasket is installed on the framing that the crawlspace hatch panel rests on.
Image:

Adding air-sealing and rigid foam insulation at the wall-to-overhanging floor juncture at the outside corner of an existing home

Adding air-sealing and rigid foam insulation at the wall-to-overhanging floor juncture at the outside corner of an existing home
Video:

Adding weatherstripping to a door

Image:

Adhesive caulk is used to seal seams and attach the multiple layers of rigid insulation

Adhesive caulk is used to seal seams and attach the multiple layers of rigid insulation
Video:

Advanced Framing vs Traditional Framing

Presentation:

Advances in Manufactured Home Energy Efficient Design

Advances in Manufactured Home Energy Efficient Design
Image:

After air-sealing the exhaust fan box, re-install the fan, and lights if needed, and re-attach the cover

After air-sealing the exhaust fan box, re-install the fan, and lights if needed, and re-attach the cover
Image:

After cleaning the exhaust fan, the gap around the fan between the fan housing and the drywall should be caulked to stop air leakage from the house to the attic

After cleaning the exhaust fan, the gap around the fan between the fan housing and the drywall should be caulked to stop air leakage from the house to the attic
Image:

After spray foam dries, a utility knife can be used to carefully trim excess foam around the exhaust fan housing

After spray foam dries, a utility knife can be used to carefully trim excess foam around the exhaust fan housing
Image:

After spraying on foaming glass cleaner, smooth the caulk with a gloved finger to get a neat, even finish.

After spraying on foaming glass cleaner, smooth the caulk with a gloved finger to get a neat, even finish
CAD File:

Air barrier at garage band joist - 1 1/2 inch rigid insulation with 2x4 sleepers

Preview Image
Air barrier at garage band joist - 1 1/2 inch rigid insulation with 2x4 sleepers
CAD File:

Air barrier at garage band joist - 1 inch rigid insulation with 1x3 wood furring

Preview Image
Air barrier at garage band joist - 1 inch rigid insulation with 1x3 wood furring
CAD File:

Air barrier at garage band joist - 1 inch rigid insulation with 2x2 wood furring

Preview Image
Air barrier at garage band joist - 1 inch rigid insulation with 2x2 wood furring
Image:

Air leaking through the home's envelope wastes a lot of energy and increases energy costs.

Air leaking through the home's envelope wastes a lot of energy and increases energy costs.
Image:

Air seal a heat pump or air conditioner air handler cabinet at all seams, holes, and junctions

Air seal a heat pump or air conditioner air handler cabinet at all seams, holes, and junctions