Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 1 - 24 of 546 results:

Video:

2012 IECC Code Level Insulation – DOE Zero Energy Ready Home Requirements

Image:

A 1- and ½-story home with a room located in the attic and the thermal boundary located at either a) the walls and ceiling of the attic room with small vented attic spaces or b) the roof line for an unvented attic

A 1- and ½-story home with a room located in the attic and the thermal boundary located at either a) the walls and ceiling of the attic room with small vented attic spaces or b) the roof line for an unvented attic
Image:

A below-grade foundation wall with a damp-proof coating

A below-grade foundation wall with a damp-proof coating
Image:

A concrete slab floor can be elevated above local grade as a strategy to prevent flood damage.

A concrete slab floor can be elevated above local grade as a strategy to prevent flood damage.
Image:

A concrete slab-on-grade foundation with exterior insulation, which can be elevated above the local grade as a flood-prevention strategy.

A concrete slab-on-grade foundation with exterior insulation, which can be elevated above the local grade as a flood-prevention strategy.
Image:

A dimpled plastic water barrier protects the insulated concrete form basement walls and carries any ground water down the walls to the footing drain to minimize the opportunity for water intrusion and frost heave.

A dimpled plastic water barrier protects the insulated concrete form basement walls and carries any ground water down the walls to the footing drain to minimize the opportunity for water intrusion and frost heave.
Image:

A dimpled rain mat and perforated drain pipe provide drainage around the basement foundation.

A dimpled rain mat and perforated drain pipe provide drainage around the basement foundation.
Image:

A layer of pea gravel or crushed stone, 4 inches thick and sloped 5%, provides a pest-resistant ground break around the perimeter of a basement foundation

A layer of pea gravel or crushed stone, 4 inches thick and sloped 5%, provides a pest-resistant ground break around the perimeter of a basement foundation
Image:

A low-sloped shed roof with the thermal boundary located at either a) the flat ceiling with a vented attic or b) the roof line for an unvented attic

A low-sloped shed roof with the thermal boundary located at either a) the flat ceiling with a vented attic or b) the roof line for an unvented attic
Image:

A self-adhering weather-resistant barrier is installed over the existing sheathing of this retrofit home to provide air sealing and a drainage plane before installing new metal and wood siding on the home.

A self-adhering weather-resistant barrier is installed over the existing sheathing of this retrofit home to provide air sealing and a drainage plane before installing new metal and wood siding on the home.
Image:

A site-built rafter roof with a raised top plate allows for more insulation underneath.

A site-built rafter roof with a raised top plate allows for more insulation underneath.
Video:

Advanced Framing vs Traditional Framing

Presentation:

Advances in Manufactured Home Energy Efficient Design

Advances in Manufactured Home Energy Efficient Design
Image:

After all holes through the ceiling are air-sealed and the baffles have been installed, then the insulation can be installed.

After all holes through the ceiling are air-sealed and the baffles have been installed, then the insulation can be installed.
CAD File:

Air barrier at garage band joist - 1 1/2 inch rigid insulation with 2x4 sleepers

Preview Image
Air barrier at garage band joist - 1 1/2 inch rigid insulation with 2x4 sleepers
Image:

Air barrier is continuous across several components of the lower section of wall

Air barrier is continuous across several components of the lower section of wall
Image:

Air seal and insulate double-walls that are half-height or full-height walls used as architectural features in homes.

Air seal and insulate double-walls that are half-height or full-height walls used as architectural features in homes.
Image:

Air seal the floor above an unconditioned basement or crawlspace and make sure floor insulation is in full contact with the underside of the subfloor.

Air seal the floor above an unconditioned basement or crawlspace and make sure floor insulation is in full contact with the underside of the subfloor.
Image:

Air seal the top, bottom, and sides of a cantilevered floor cavity and ensure that insulation is in full contact with all sides without voids.

Air seal the top, bottom, and sides of a cantilevered floor cavity and ensure that insulation is in full contact with all sides without voids.
CAD File:

Air sealing at corner vertical bathtub chase

Preview Image
Air sealing at corner vertical bathtub chase
CAD File:

Air sealing at skylight shaft

Preview Image
Air sealing at skylight shaft
CAD File:

Air sealing behind shower with cavity rigid insulation

Preview Image
Air sealing behind shower with cavity rigid insulation
CAD File:

Air sealing behind shower with thin-profile sheathing

Preview Image
Air sealing behind shower with thin-profile sheathing
CAD File:

Air sealing behind tub with cavity rigid insulation

Preview Image
Air sealing behind tub with cavity rigid insulation