Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 577 - 596 of 596 results:

Image:

Wrong – Rigid insulation is being installed without cap nails

Wrong – Rigid insulation is being installed without cap nails
Image:

Wrong – Rips in foil air barrier behind shower were not taped; solid air barrier material is more durable.

Wrong – Rips in foil air barrier behind shower were not taped; solid air barrier material is more durable.
Image:

Wrong – Seams of air barrier not sealed

Wrong – Seams of air barrier not sealed
Image:

Wrong – Seams of air barrier not sealed

Wrong – Seams of air barrier not sealed
Image:

Wrong – The backing on this knee wall was not air sealed prior to adding insulation.

Wrong – The backing on this knee wall was not air sealed prior to adding insulation.
Image:

Wrong – The batt insulation on this knee wall is not properly supported and there is no air sealed rigid backing to provide a solid air barrier.

Wrong – The batt insulation on this knee wall is not properly supported and there is no air sealed rigid backing to provide a solid air barrier.
Image:

Wrong – The building felt is not installed on the entire house

Wrong – The building felt is not installed on the entire house
Image:

Wrong – The flashing of the roof-wall juncture was installed above the roof shingles instead of below the roof shingles; also no kickout flashing was installed.

Wrong – The flashing of the roof-wall juncture was installed above the roof shingles instead of below the roof shingles; also no kickout flashing was installed.
Image:

Wrong – The gable end wall failed because the rigid foam sheathing was not backed up by plywood or OSB.

Wrong – The gable end wall failed because the rigid foam sheathing was not backed up by plywood or OSB.
Image:

Wrong – The rigid air barrier material between the cantilever and the conditioned space is not air sealed at the seams.

Wrong – The rigid air barrier material between the cantilever and the conditioned space is not air sealed at the seams.
Image:

Wrong – The rigid sheathing seams are not taped and the gaps could cause moisture problems

Wrong – The rigid sheathing seams are not taped and the gaps could cause moisture problems
Image:

Wrong – The water-resistant barrier is not complete and the holes and gaps could cause moisture problems

Wrong – The water-resistant barrier is not complete and the holes and gaps could cause moisture problems
Image:

Wrong – There is not a water-resistant barrier installed underneath the exterior finish of the walls

Wrong – There is not a water-resistant barrier installed underneath the exterior finish of the walls
Image:

Wrong – This second-story floor plan has red lines that indicate openings from the attic into the interstitial floor space

Wrong – This second-story floor plan has red lines that indicate openings from the attic into the interstitial floor space
Image:

Wrong – When insulated sheathing is installed correctly, you should not see daylight. Nail holes were also left unplugged.

Wrong – When insulated sheathing is installed correctly, you should not see daylight. Nail holes were also left unplugged.
Image:

Wrong – Wiring holes in OSB were cut much larger than needed.

Wrong – Wiring holes in OSB were cut much larger than needed.
Image:

Wrong –Best practice solid air barrier material was not used behind the shower surround.

Wrong –Best practice solid air barrier material was not used behind the shower surround.
Image:

Wrong--No insulation installed behind fireplace

Wrong--No insulation installed behind fireplace
Video:

Your Northern Home: Attics/Air leakage/Stack effect

Image:

Z flashing is installed behind the rigid foam and metal lathe that goes behind the stucco siding to protect the transition between the wall sheathing and the exterior foundation insulation.

Z flashing is installed behind the rigid foam and metal lathe that goes behind the stucco siding to protect the transition between the wall sheathing and the exterior foundation insulation.