Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 1 - 24 of 575 results:

Video:

2012 IECC Code Level Insulation – DOE Zero Energy Ready Home Requirements

Image:

A 1- and ½-story home with a room located in the attic and the thermal boundary located at either a) the walls and ceiling of the attic room with small vented attic spaces or b) the roof line for an unvented attic

A 1- and ½-story home with a room located in the attic and the thermal boundary located at either a) the walls and ceiling of the attic room with small vented attic spaces or b) the roof line for an unvented attic
Image:

A contractor prepares a home for a full window replacement

A contractor prepares a home for a full window replacement
Image:

A home is tested at two points for enclosure air leakage

A home is tested at two points for enclosure air leakage
Image:

A Kalamazoo homeowner reduced wintertime chill, condensation, and snowblower noise by installing high-performance interior storm windows

A Kalamazoo homeowner reduced wintertime chill, condensation, and snowblower noise by installing high-performance interior storm windows
Image:

A low-sloped shed roof with the thermal boundary located at either a) the flat ceiling with a vented attic or b) the roof line for an unvented attic

A low-sloped shed roof with the thermal boundary located at either a) the flat ceiling with a vented attic or b) the roof line for an unvented attic
Image:

A metal storm panel is installed in a track permanently mounted above and below the window frame and secured with wing nuts to studs mounted on the track.

A metal storm panel is installed in a track permanently mounted above and below the window frame and secured with wing nuts to studs mounted on the track.
Image:

A new high-performance window will be installed in the rough opening of this existing home

A new high-performance window will be installed in the rough opening of this existing home
Image:

A piece of siding is used as sill extension and to provide slope in the opening for the window, which is deeper because exterior rigid foam has been added

A piece of siding is used as sill extension and to provide slope in the opening for the window, which is deeper because exterior rigid foam has been added
Image:

A self-adhering weather-resistant barrier is installed over the existing sheathing of this retrofit home to provide air sealing and a drainage plane before installing new metal and wood siding on the home.

A self-adhering weather-resistant barrier is installed over the existing sheathing of this retrofit home to provide air sealing and a drainage plane before installing new metal and wood siding on the home.
Image:

A site-built rafter roof with a raised top plate allows for more insulation underneath.

A site-built rafter roof with a raised top plate allows for more insulation underneath.
Image:

A thin-triple window uses a narrow interior glass pane and narrower gaps between panels often filled with krypton, rather than argon gas, to achieve triple-pane performance with an IGU that fits in a double-pane window frame

A thin-triple window uses a narrow interior glass pane and narrower gaps between panels often filled with krypton, rather than argon gas, to achieve triple-pane performance with an IGU that fits in a double-pane window frame
Image:

Accordion-type hurricane shutters protect sliding glass doors from high winds and wind-borne debris.

Accordion-type hurricane shutters protect sliding glass doors from high winds and wind-borne debris.
Video:

Advanced Framing vs Traditional Framing

Presentation:

Advances in Manufactured Home Energy Efficient Design

Advances in Manufactured Home Energy Efficient Design
Image:

After all holes through the ceiling are air-sealed and the baffles have been installed, then the insulation can be installed.

After all holes through the ceiling are air-sealed and the baffles have been installed, then the insulation can be installed.
CAD File:

Air barrier at garage band joist - 1 1/2 inch rigid insulation with 2x4 sleepers

Preview Image
Air barrier at garage band joist - 1 1/2 inch rigid insulation with 2x4 sleepers
Image:

Air barrier is continuous across several components of the lower section of wall

Air barrier is continuous across several components of the lower section of wall
Image:

Air seal and insulate double-walls that are half-height or full-height walls used as architectural features in homes.

Air seal and insulate double-walls that are half-height or full-height walls used as architectural features in homes.
Image:

Air seal and insulate drawer and closet boxes in attic kneewalls

Air seal and insulate drawer and closet boxes in attic kneewalls
Image:

Air seal around all duct shafts and flues installed through ceilings, walls, or flooring to keep conditioned air from leaking into unconditioned space.

Air seal around all duct shafts and flues installed through ceilings, walls, or flooring to keep conditioned air from leaking into unconditioned space.
Image:

Air seal around kitchen and bathroom exhaust fans to keep conditioned air from leaking into unconditioned space.

Air seal around kitchen and bathroom exhaust fans to keep conditioned air from leaking into unconditioned space.
CAD File:

Air seal at chase walls - plan

Preview Image
Air seal at chase walls - plan
CAD File:

Air seal at duct boot

Preview Image
Air seal at duct boot