Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 121 - 144 of 1024 results:

Image:

A low-sloped shed roof with the thermal boundary located at either a) the flat ceiling with a vented attic or b) the roof line for an unvented attic

A low-sloped shed roof with the thermal boundary located at either a) the flat ceiling with a vented attic or b) the roof line for an unvented attic
Image:

A method for preventing waterproofing issues at the intersection of a concrete column, concrete slab, and concrete pier.

A method for preventing waterproofing issues at the intersection of a concrete column, concrete slab, and concrete pier.
Image:

A method for preventing waterproofing issues at the intersection of a concrete pier, concrete retaining wall, and concrete slab.

A method for preventing waterproofing issues at the intersection of a concrete pier, concrete retaining wall, and concrete slab.
Image:

A method for preventing waterproofing issues at the intersection of a concrete slab and a rock anchor.

A method for preventing waterproofing issues at the intersection of a concrete slab and a rock anchor.
Image:

A method to ensure waterproofing continuity across the elevator pit of a multistory multifamily building.

A method to ensure waterproofing continuity across the elevator pit of a multistory multifamily building.
Image:

A monolithic concrete slab is insulated on the exterior slab edge with rigid foam

A monolithic concrete slab is insulated on the exterior slab edge with rigid foam
Image:

A paint-on waterproofing covers the exterior and tops of the concrete block foundation walls and piers to block moisture moving up through the concrete, while foil-faced R-13 insulation lines the inside surface of the exterior walls.

A paint-on waterproofing covers the exterior and tops of the concrete block foundation walls and piers to block moisture moving up through the concrete, while foil-faced R-13 insulation lines the inside surface of the exterior walls.
Image:

A raised slab foundation elevates the level of the floor above grade

A raised slab foundation elevates the level of the floor above grade
Image:

A raised wood pier foundation can raise the subfloor above the design flood elevation.

A raised wood pier foundation can raise the subfloor above the design flood elevation.
Image:

A self-adhering weather-resistant barrier is installed over the existing sheathing of this retrofit home to provide air sealing and a drainage plane before installing new metal and wood siding on the home.

A self-adhering weather-resistant barrier is installed over the existing sheathing of this retrofit home to provide air sealing and a drainage plane before installing new metal and wood siding on the home.
Image:

A site-built rafter roof with a raised top plate allows for more insulation underneath.

A site-built rafter roof with a raised top plate allows for more insulation underneath.
Image:

A sprayer-applied waterproofing covers the grout-filled top course of concrete foundation blocks to prevent moisture migration from the ground into the framing.

A sprayer-applied waterproofing covers the grout-filled top course of concrete foundation blocks to prevent moisture migration from the ground into the framing.
Image:

A vapor barrier was installed on the floor of this crawlspace and extended up the walls then the foundation walls were covered with rigid foam.

A vapor barrier was installed on the floor of this crawlspace and extended up the walls then the foundation walls were covered with rigid foam.
Video:

Above the Flood

Image:

Advanced framing techniques include constructing on a 2-foot grid where wall studs are placed 24 inches on center and aligned with roof and floor trusses for a continuous load path from roof to foundation.

Advanced framing techniques include constructing on a 2-foot grid where wall studs are placed 24 inches on center and aligned with roof and floor trusses for a continuous load path from roof to foundation.
Video:

Advanced Framing vs Traditional Framing

Presentation:

Advances in Manufactured Home Energy Efficient Design

Advances in Manufactured Home Energy Efficient Design
Image:

After all holes through the ceiling are air-sealed and the baffles have been installed, then the insulation can be installed.

After all holes through the ceiling are air-sealed and the baffles have been installed, then the insulation can be installed.
Video:

After the Storm: Building for High Wind Resistance

CAD File:

Air barrier at garage band joist - 1 1/2 inch rigid insulation with 2x4 sleepers

Preview Image
Air barrier at garage band joist - 1 1/2 inch rigid insulation with 2x4 sleepers
Image:

Air barrier is continuous across several components of the lower section of wall

Air barrier is continuous across several components of the lower section of wall
Image:

Air seal and insulate double-walls that are half-height or full-height walls used as architectural features in homes.

Air seal and insulate double-walls that are half-height or full-height walls used as architectural features in homes.
Image:

Air seal the floor above an unconditioned basement or crawlspace and make sure floor insulation is in full contact with the underside of the subfloor.

Air seal the floor above an unconditioned basement or crawlspace and make sure floor insulation is in full contact with the underside of the subfloor.
Image:

Air seal the top, bottom, and sides of a cantilevered floor cavity and ensure that insulation is in full contact with all sides without voids.

Air seal the top, bottom, and sides of a cantilevered floor cavity and ensure that insulation is in full contact with all sides without voids.