Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 1 - 24 of 505 results:

Video:

2012 IECC Code Level Insulation – DOE Zero Energy Ready Home Requirements

CAD File:

2x10 Rafter - Insulation Above Roof Deck and In Rafter Cavity CAD

Preview Image
2x10 Rafter - Insulation Above Roof Deck and In Rafter Cavity CAD
CAD File:

2x10 Rafter - Insulation Below Roof Deck In Rafter Cavity CAD

Preview Image
2x10 Rafter - Insulation Below Roof Deck In Rafter Cavity CAD
CAD File:

2x12 Rafter - Insulation Above Roof Deck and In Rafter Cavity CAD

Preview Image
2x12 Rafter - Insulation Above Roof Deck and In Rafter Cavity CAD
CAD File:

2x12 Rafter - Insulation Below Roof Deck In Rafter Cavity CAD

Preview Image
2x12 Rafter - Insulation Below Roof Deck In Rafter Cavity CAD
CAD File:

2x4 Raised Truss - Insulation Below Roof Deck CAD

Preview Image
2x4 Raised Truss - Insulation Below Roof Deck CAD
Image:

A 1- and ½-story home with a room located in the attic and the thermal boundary located at either a) the walls and ceiling of the attic room with small vented attic spaces or b) the roof line for an unvented attic

A 1- and ½-story home with a room located in the attic and the thermal boundary located at either a) the walls and ceiling of the attic room with small vented attic spaces or b) the roof line for an unvented attic
Image:

A floor cavity between the first and second floor can provide a conditioned space for HVAC ducts if the rim joists are insulated and air sealed, if sufficient space is available, and if open-web floor joists are used

A floor cavity between the first and second floor can provide a conditioned space for HVAC ducts if the rim joists are insulated and air sealed, if sufficient space is available, and if open-web floor joists are used
Image:

A low-sloped shed roof with the thermal boundary located at either a) the flat ceiling with a vented attic or b) the roof line for an unvented attic

A low-sloped shed roof with the thermal boundary located at either a) the flat ceiling with a vented attic or b) the roof line for an unvented attic
Image:

A portable CO monitor is used to test for ambient CO near a ventless combustion fireplace

A portable CO monitor is used to test for ambient CO near a ventless combustion fireplace
Image:

A raised wood pier foundation can raise the subfloor above the design flood elevation.

A raised wood pier foundation can raise the subfloor above the design flood elevation.
Image:

A self-adhering weather-resistant barrier is installed over the existing sheathing of this retrofit home to provide air sealing and a drainage plane before installing new metal and wood siding on the home.

A self-adhering weather-resistant barrier is installed over the existing sheathing of this retrofit home to provide air sealing and a drainage plane before installing new metal and wood siding on the home.
Image:

A site-built rafter roof with a raised top plate allows for more insulation underneath.

A site-built rafter roof with a raised top plate allows for more insulation underneath.
Image:

A typical Las Vegas hot-dry climate home made of wood frame construction and insulated with R-25 expanded polystyrene externally over a drainage plane, with an unvented wood frame insulated attic and roof assembly.

A typical Las Vegas hot-dry climate home made of wood frame construction and insulated with R-25 expanded polystyrene externally over a drainage plane, with an unvented wood frame insulated attic and roof assembly.
Image:

A typical older masonry home with unreinforced brick walls, wood floors, and a wood roof

A typical older masonry home with unreinforced brick walls, wood floors, and a wood roof
Image:

A ventless gas fireplace has no chimney

A ventless gas fireplace has no chimney
Image:

Adding air-sealing and rigid foam insulation at the wall-to-overhanging floor juncture at the outside corner of an existing home

Adding air-sealing and rigid foam insulation at the wall-to-overhanging floor juncture at the outside corner of an existing home
Video:

Advanced Framing vs Traditional Framing

Presentation:

Advances in Manufactured Home Energy Efficient Design

Advances in Manufactured Home Energy Efficient Design
Image:

After all holes through the ceiling are air-sealed and the baffles have been installed, then the insulation can be installed.

After all holes through the ceiling are air-sealed and the baffles have been installed, then the insulation can be installed.
Image:

After setting precast concrete basement walls on an 8-inch bed of trap rock, this builder sprayed 2 inches of closed-cell spray foam directly onto the ground then laid piping for radiant floor heating before pouring the concrete floor slab.

After setting precast concrete basement walls on an 8-inch bed of trap rock, this builder sprayed 2 inches of closed-cell spray foam directly onto the ground then laid piping for radiant floor heating before pouring the concrete floor slab.
CAD File:

Air barrier at garage band joist - 1 1/2 inch rigid insulation with 2x4 sleepers

Preview Image
Air barrier at garage band joist - 1 1/2 inch rigid insulation with 2x4 sleepers
CAD File:

Air barrier at garage band joist - 1 inch rigid insulation with 1x3 wood furring

Preview Image
Air barrier at garage band joist - 1 inch rigid insulation with 1x3 wood furring
CAD File:

Air barrier at garage band joist - 1 inch rigid insulation with 2x2 wood furring

Preview Image
Air barrier at garage band joist - 1 inch rigid insulation with 2x2 wood furring