Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 1 - 24 of 518 results:

Video:

2012 IECC Code Level Insulation – DOE Zero Energy Ready Home Requirements

Image:

A 1- and ½-story home with a room located in the attic and the thermal boundary located at either a) the walls and ceiling of the attic room with small vented attic spaces or b) the roof line for an unvented attic

A 1- and ½-story home with a room located in the attic and the thermal boundary located at either a) the walls and ceiling of the attic room with small vented attic spaces or b) the roof line for an unvented attic
Image:

A low-sloped shed roof with the thermal boundary located at either a) the flat ceiling with a vented attic or b) the roof line for an unvented attic

A low-sloped shed roof with the thermal boundary located at either a) the flat ceiling with a vented attic or b) the roof line for an unvented attic
Image:

A portable power meter shows the power usage of equipment; e.g., this laptop is drawing 12 watts while idle

A portable power meter shows the power usage of equipment; e.g., this laptop is drawing 12 watts while idle
Image:

A roof-mounted solar electric system can be sized to produce enough electricity to power the home and an electric car.

A roof-mounted solar electric system can be sized to produce enough electricity to power the home and an electric car.
Image:

A self-adhering weather-resistant barrier is installed over the existing sheathing of this retrofit home to provide air sealing and a drainage plane before installing new metal and wood siding on the home.

A self-adhering weather-resistant barrier is installed over the existing sheathing of this retrofit home to provide air sealing and a drainage plane before installing new metal and wood siding on the home.
Image:

A site-built rafter roof with a raised top plate allows for more insulation underneath.

A site-built rafter roof with a raised top plate allows for more insulation underneath.
Image:

A tempered glass window can be identified by the “bug” or white etched label at one corner of the window.

A tempered glass window can be identified by the “bug” or white etched label at one corner of the window.
Image:

Above the 20 inches of blown cellulose ultra-efficient attic insulation, Near Zero Maine installed a walkway in the attic to provide easy access to electric wiring.

Above the 20 inches of blown cellulose ultra-efficient attic insulation, Near Zero Maine installed a walkway in the attic to provide easy access to electric wiring.
Video:

Advanced Framing vs Traditional Framing

Presentation:

Advances in Manufactured Home Energy Efficient Design

Advances in Manufactured Home Energy Efficient Design
Image:

After all holes through the ceiling are air-sealed and the baffles have been installed, then the insulation can be installed.

After all holes through the ceiling are air-sealed and the baffles have been installed, then the insulation can be installed.
CAD File:

Air barrier at garage band joist - 1 1/2 inch rigid insulation with 2x4 sleepers

Preview Image
Air barrier at garage band joist - 1 1/2 inch rigid insulation with 2x4 sleepers
Image:

Air barrier is continuous across several components of the lower section of wall

Air barrier is continuous across several components of the lower section of wall
Image:

Air seal and insulate double-walls that are half-height or full-height walls used as architectural features in homes.

Air seal and insulate double-walls that are half-height or full-height walls used as architectural features in homes.
CAD File:

Air seal at top plate electrical penetration

Preview Image
Air seal at top plate electrical penetration
Image:

Air seal the floor above an unconditioned basement or crawlspace and make sure floor insulation is in full contact with the underside of the subfloor.

Air seal the floor above an unconditioned basement or crawlspace and make sure floor insulation is in full contact with the underside of the subfloor.
Image:

Air seal the top, bottom, and sides of a cantilevered floor cavity and ensure that insulation is in full contact with all sides without voids.

Air seal the top, bottom, and sides of a cantilevered floor cavity and ensure that insulation is in full contact with all sides without voids.
CAD File:

Air sealing at corner vertical bathtub chase

Preview Image
Air sealing at corner vertical bathtub chase
CAD File:

Air sealing at recessed lighting in attic - pre made

Preview Image
Air sealing at recessed lighting in attic - pre made
CAD File:

Air sealing at recessed lighting in attic - site built

Preview Image
Air sealing at recessed lighting in attic - site built
CAD File:

Air sealing at skylight shaft

Preview Image
Air sealing at skylight shaft
CAD File:

Air sealing at whole house fan enclosure

Preview Image
Air sealing at whole house fan enclosure
CAD File:

Air sealing behind shower with cavity rigid insulation

Preview Image
Air sealing behind shower with cavity rigid insulation