Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 793 - 816 of 975 results:

Image:

This exterior wall retrofit permits drying to the exterior of a sill plate installed on an untreated flat foundation wall

This exterior wall retrofit permits drying to the exterior of a sill plate installed on an untreated flat foundation wall
Image:

This farmhouse was retrofit by removing the existing siding and adding taped insulated sheathing and battens before installing new siding

This farmhouse was retrofit by removing the existing siding and adding taped insulated sheathing and battens before installing new siding
Image:

This flood-resistant exterior wall with brick or fiber-cement siding will limit moisture damage in exterior walls.

This flood-resistant exterior wall with brick or fiber-cement siding will limit moisture damage in exterior walls.
Image:

This flood-resistant masonry wall design with metal framing and rigid foam insulation will limit moisture damage in exterior walls.

This flood-resistant masonry wall design with metal framing and rigid foam insulation will limit moisture damage in exterior walls.
Image:

This home is covered with coated sheathing. Wall portions that will be covered with stone have a dimple plastic moisture barrier and metal lathe that is being covered with plaster.

This home is covered with coated sheathing. Wall portions that will be covered with stone have a dimple plastic moisture barrier and metal lathe that is being covered with plaster.
Image:

This home uses light-colored standard paints and finishes on siding and roofing materials to reduce cooling loads without adding material cost.

This home uses light-colored standard paints and finishes on siding and roofing materials to reduce cooling loads without adding material cost.
Image:

This home was designed with continuous roof vents and few roof penetrations, allowing more room for the solar shingles that integrate with the asphalt shingles installed to meet IBHS Fortified Roof criteria for increased resistance to high winds and rain

This home was designed with continuous roof vents and very few roof penetrations, allowing more room for the solar shingles that integrate with the asphalt shingles installed to meet IBHS Fortified Roof criteria for increased resistance to high winds and wind-driven rain.
Image:

This home’s south-facing roof provides adequate space for both a solar electric system and solar thermal hot water system.

This home’s south-facing roof provides adequate space for both a solar electric system and solar thermal hot water system.
Image:

This house design in the Hot-Humid climate uses a slab foundation, masonry walls, and an Exterior Insulation Finish System (EIFS) cladding.

This house design in the Hot-Humid climate uses a slab foundation, masonry walls, and an Exterior Insulation Finish System (EIFS) cladding.
Image:

This house wrap assembly can work in all climates except extreme cold.

This house wrap assembly can work in all climates except extreme cold.
Image:

This map shows an annual average U.S. solar resource in kilowatt hours per day of solar energy available per square meter.

This map shows an annual average U.S. solar resource in kilowatt hours per day of solar energy available per square meter.
Image:

This plastic mesh material creates an air space behind the siding and provides a route for water to run out of the wall in case of leaks.

This plastic mesh material creates an air space behind the siding and provides a route for water to run out of the wall in case of leaks.
Image:

This porch light has cap flashing to direct water out and over the wood trim; the drip edge on the metal flashing could protrude out further.

This porch light has cap flashing to direct water out and over the wood trim; the drip edge on the metal flashing could protrude out further.
Image:

This roof is hurricane proofed with a coated insulated OSB deck sheathing that is caulked and taped at all seams with a water-resistant tape, then fully covered with a peel-and-stick membrane, and asphalt shingles.

This roof is hurricane proofed with a coated insulated OSB deck sheathing that is caulked and taped at all seams with a water-resistant tape, then fully covered with a peel-and-stick membrane, and asphalt shingles.
Image:

This roof was constructed to meet the IBHS Fortified Roof standard by sealing the decking seams with flashing tape, installing synthetic roof underlayment secured with metal drip edge and nailed every six inches, and using self-adhered starter shingles.

This roof was constructed to meet the IBHS Fortified Roof standard by sealing the decking seams with flashing tape, installing synthetic roof underlayment secured with metal drip edge and nailed every six inches, and using self-adhered starter shingles.
Image:

This search for metal roofing products on the CRRC Rated Roof Products Directory highlights the initial and 3-year aged SRI values for each product

This search for metal roofing products on the CRRC Rated Roof Products Directory highlights the initial and 3-year aged SRI values for each product
Image:

This simplified decision tree can help a homeowner or contractor assess how appropriate a cool roof or wall will be for a particular home

This simplified decision tree can help a homeowner or contractor assess how appropriate a cool roof or wall will be for a particular home
Image:

This solar powered attic fan runs when the sun is shining and does not draw any power from the home’s electrical system

This solar powered attic fan runs when the sun is shining and does not draw any power from the home’s electrical system
Image:

This step flashing was installed over, not under, the siding, so water is getting behind the step flashing and rotting the siding; the house was also badly designed with a window frame that touches the intersecting roof, inviting interior water damage.

This step flashing was installed over, not under, the siding, so water is getting behind the step flashing and rotting the siding; the house was also badly designed with a window frame that touches the intersecting roof, inviting interior water damage.
Image:

This sump pump is installed correctly

This sump pump is installed correctly
Image:

This swale and berm slow the flow of stormwater across a site to minimize erosion.

This swale and berm slow the flow of stormwater across a site to minimize erosion.
Image:

This through-the-wall flashing direct water out of the wall at this siding transition.

This through-the-wall flashing direct water out of the wall at this siding transition.
Image:

This through-the-wall flashing directs any water that get into the wall through the lap siding out at the transition to the stone cladding which has a capstone that is properly sloped away from the wall.

This through-the-wall flashing directs any water that get into the wall through the lap siding out at the transition to the stone cladding which has a capstone that is properly sloped away from the wall.
Image:

This xeriscaped yard has pavers, rock, and artificial turf.

This xeriscaped yard has pavers, rock, and artificial turf.