Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 385 - 408 of 454 results:

Image:

This infrared image shows little heat gain from north-facing double-pane windows with blinds, but significant heat output from computer monitors

This infrared image shows little heat gain from north-facing double-pane windows with blinds, but significant heat output from computer monitors
Image:

This MSHP operates with 120 volts power, has an EER of 18 Btu/Wh, uses about 800 W at full output, and operates remotely with a smart home control system

This MSHP operates with 120 volts power, has an EER of 18 Btu/Wh, uses about 800 W at full output, and operates remotely with a smart home control system
Image:

This plastic mesh material creates an air space behind the siding and provides a route for water to run out of the wall in case of leaks.

This plastic mesh material creates an air space behind the siding and provides a route for water to run out of the wall in case of leaks.
Image:

This roof is hurricane proofed with a coated insulated OSB deck sheathing that is caulked and taped at all seams with a water-resistant tape, then fully covered with a peel-and-stick membrane, and asphalt shingles.

This roof is hurricane proofed with a coated insulated OSB deck sheathing that is caulked and taped at all seams with a water-resistant tape, then fully covered with a peel-and-stick membrane, and asphalt shingles.
Image:

This room has several passive and low-energy cooling features including a ceiling fan, fully operable French doors, window shading, an outdoor water feature, and light-colored hard-scaping.

This room has several passive and low-energy cooling features including a ceiling fan, fully operable French doors, window shading, an outdoor water feature, and light-colored hard-scaping.
Image:

This search for metal roofing products on the CRRC Rated Roof Products Directory highlights the initial and 3-year aged SRI values for each product

This search for metal roofing products on the CRRC Rated Roof Products Directory highlights the initial and 3-year aged SRI values for each product
Image:

This simplified decision tree can help a homeowner or contractor assess how appropriate a cool roof or wall will be for a particular home

This simplified decision tree can help a homeowner or contractor assess how appropriate a cool roof or wall will be for a particular home
Image:

This traditional whole-house fan uses uninsulated gravity dampers.

This traditional whole-house fan uses uninsulated gravity dampers.
Image:

This wall and window assembly has excessive framing around the windows, which can lead to heat gain in how climate zones.

This wall and window assembly has excessive framing around the windows, which can lead to heat gain in how climate zones.
Image:

This whole house fan is suspended from rafters and connected to the intake grille by a curved insulated duct, greatly reducing vibration and noise in the occupied space

This whole house fan is suspended from rafters and connected to the intake grille by a curved insulated duct, greatly reducing vibration and noise in the occupied space
Image:

This whole-house fan is suspended from rafters and connected to the intake grille by a curved acoustic duct, greatly reducing vibration and noise in the occupied space

This whole-house fan is suspended from rafters and connected to the intake grille by a curved acoustic duct, greatly reducing vibration and noise in the occupied space
Presentation:

Thomas Phillips, HBI, New Abnormal: Adapting Buildings to More Extreme Heat and Power Outages

Thomas Phillips, HBI, New Abnormal: Adapting Buildings to More Extreme Heat and Power Outages
Image:

Tile flooring will provide higher thermal mass than wooden or laminate flooring

Tile flooring will provide higher thermal mass than wooden or laminate flooring
Image:

To reduce the risk of condensation on the interior of the roof sheathing in cold weather, the ratio of exterior (above-deck) insulation must be increased as a percent of total attic insulation as outside temperature decreases

To reduce the risk of condensation on the interior of the roof sheathing in cold weather, the ratio of exterior (above-deck) insulation must be increased as a percent of total attic insulation as outside temperature decreases
Image:

Trees and hedges can be used to funnel or deflect prominent winds

Trees and hedges can be used to funnel or deflect prominent winds
Image:

Two layers of XPS are installed with staggered seams over a liquid-applied membrane on the structural sheathing

Two layers of XPS are installed with staggered seams over a liquid-applied membrane on the structural sheathing
Image:

Two types of paint-on flashing (green and red) are installed on the walls and around the windows, over the coated sheathing which is taped at the seams.

Two types of paint-on flashing (green and red) are installed on the walls and around the windows, over the coated sheathing which is taped at the seams.
Image:

Typical Concrete Tile Roofs in Florida

Typical Concrete Tile Roofs in Florida
Image:

Unvented roof assembly at eave retrofitted with rigid foam, spray foam, and taped top edge of existing house wrap or building paper

Unvented roof assembly at eave retrofitted with rigid foam, spray foam, and taped top edge of existing house wrap or building paper
Image:

Unvented roof assembly at rake retrofitted with a filler piece and taped top edge of existing house wrap or building paper to seal the top of wall-to-roof transition

Unvented roof assembly at rake retrofitted with a filler piece and taped top edge of existing house wrap or building paper to seal the top of wall-to-roof transition
Image:

Upper-floor tie to lower floor for two-story building. Floor tie anchor and nailed wall sheathing.

Upper-floor tie to lower floor for two-story building. Floor tie anchor and nailed wall sheathing.
Image:

Use a truss joist header assembly as shown here to reduce thermal bridging in hot climate zones.

Use a truss joist header assembly as shown here to reduce thermal bridging in hot climate zones.
Image:

Use flashing tape to seal around any pipes or vents that penetrate through the foam

Use flashing tape to seal around any pipes or vents that penetrate through the foam
Image:

Use staggered 2x4 studs to minimize thermal bridging in hot climate zones.

Use staggered 2x4 studs to minimize thermal bridging in hot climate zones.