Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 1777 - 1800 of 1860 results:

Image:

Wrong – No air barrier installed prior to tub installation

Wrong – No air barrier installed prior to tub installation
Image:

Wrong – No air barrier installed prior to tub installation

Wrong – No air barrier installed prior to tub installation
Image:

Wrong – No air barrier installed under staircase

Wrong – No air barrier installed under staircase
Image:

Wrong – No rigid air barrier is installed behind fireplace

Wrong – No rigid air barrier is installed behind fireplace
Image:

Wrong – No rigid backing was installed on the attic knee wall.

Wrong – No rigid backing was installed on the attic knee wall.
Image:

Wrong – No top plate was installed.

Wrong – No top plate was installed.
Image:

Wrong – Rain barrel installed without an overflow spout that terminates away from foundation

Wrong – Rain barrel installed without an overflow spout that terminates away from foundation
Image:

Wrong – Rigid air barrier not installed to hold insulation in place

Wrong – Rigid air barrier not installed to hold insulation in place
Image:

Wrong – Rigid air barrier not properly sealed around skylight shaft

Wrong – Rigid air barrier not properly sealed around skylight shaft
Image:

Wrong – Rigid insulation is being installed without cap nails

Wrong – Rigid insulation is being installed without cap nails
Image:

Wrong – Roof underlayment is not fully adhered and roof deck seams are not sealed so roof is susceptible to high-wind events

Wrong – Roof underlayment is not fully adhered and roof deck seams are not sealed so roof is susceptible to high-wind events
Image:

Wrong – The asphalt shingle shim is too small and the floor joist was cut too short.

Wrong – The asphalt shingle shim is too small and the floor joist was cut too short.
Image:

Wrong – The backing on this knee wall was not air sealed prior to adding insulation.

Wrong – The backing on this knee wall was not air sealed prior to adding insulation.
Image:

Wrong – The batt insulation on this knee wall is not properly supported and there is no air sealed rigid backing to provide a solid air barrier.

Wrong – The batt insulation on this knee wall is not properly supported and there is no air sealed rigid backing to provide a solid air barrier.
Image:

Wrong – The below-grade concrete walls do not have any damp-proof coating

Wrong – The below-grade concrete walls do not have any damp-proof coating
Image:

Wrong – The building felt is not installed on the entire house

Wrong – The building felt is not installed on the entire house
Image:

Wrong – The clips holding these metal roofing panels were set too far from the roof eave (above red line) and the panels lifted in strong winds

Wrong – The clips holding these metal roofing panels were set too far from the roof eave (above red line) and the panels lifted in strong winds
Image:

Wrong – The corners are not properly flashed, leaving a vulnerable area in the drainage system

Wrong – The corners are not properly flashed, leaving a vulnerable area in the drainage system
Image:

Wrong – The cripple wall beneath this house failed in an earthquake

Wrong – The cripple wall beneath this house failed in an earthquake
Image:

Wrong – The damaged rim joist was not replaced and its strength is compromised in a critical load-bearing corner.

Wrong – The damaged rim joist was not replaced and its strength is compromised in a critical load-bearing corner.
Image:

Wrong – The downspout terminates too close to the foundation of the house

Wrong – The downspout terminates too close to the foundation of the house
Image:

Wrong – The flashing of the roof-wall juncture was installed above the roof shingles instead of below the roof shingles; also no kickout flashing was installed.

Wrong – The flashing of the roof-wall juncture was installed above the roof shingles instead of below the roof shingles; also no kickout flashing was installed.
Image:

Wrong – The insulated concrete forms at the foundation do not have a damp-proof coating

Wrong – The insulated concrete forms at the foundation do not have a damp-proof coating
Image:

Wrong – The metal panels covering this roof used snaplocks and concealed fasteners that gave way in high winds.

Wrong – The metal panels covering this roof used snaplocks and concealed fasteners that gave way in high winds.