Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 817 - 840 of 879 results:

Image:

Wrong - Exhaust pipe is not vertical; poorly installed roofing; roofing odd placement for gable vent.

Wrong - Exhaust pipe is not vertical; poorly installed roofing; roofing odd placement for gable vent.
Image:

Wrong - Flue pipe was poorly flashed at roof.

Wrong - Flue pipe was poorly flashed at roof.
Image:

Wrong - House wrap was not properly cut and adhered where the roof meets the wall so water is likely to get behind the house wrap.

Wrong - House wrap was not properly cut and adhered where the roof meets the wall so water is likely to get behind the house wrap.
Image:

Wrong - House wrap was poorly cut at wall interface and not taped leaving wood exposed and vulnerable to water entry.

Wrong - House wrap was poorly cut at wall interface and not taped leaving wood exposed and vulnerable to water entry.
Image:

Wrong - If the soffit is applied directly to the rafter eave, it forms a sloping soffit, which creates a pocket that can trap hot air and embers from a wildfire.

Wrong - If the soffit is applied directly to the rafter eave, it forms a sloping soffit, which creates a pocket that can trap hot air and embers from a wildfire.
Image:

Wrong - Ladder framing method for a gable overhang offers low resistance to wind uplift.

Wrong - Ladder framing method for a gable overhang offers low resistance to wind uplift.
Image:

Wrong - Metal flashing should be used at wall-to-roof junctions.

Wrong - Metal flashing should be used at wall-to-roof junctions.
Image:

Wrong - No metal drip edge is visible and asphalt shingles hang down too far.

Wrong - No metal drip edge is visible and asphalt shingles hang down too far.
Image:

Wrong - Roof deck sheathing nails missed the trusses, potentially weakening the roof in high winds.

Wrong - Roof deck sheathing nails missed the trusses, potentially weakening the roof in high winds.
Image:

Wrong - Roof is missing metal drip edge to cover the edge of OSB roof decking, roof underlayment should be trimmed back, and asphalt shingles are poorly installed.

Wrong - Roof is missing metal drip edge to cover the edge of OSB roof decking, roof underlayment should be trimmed back, and asphalt shingles are poorly installed.
Image:

Wrong - Roof-wall juncture lacks metal flashing and is poorly designed, thus encouraging water entry.

Wrong - Roof-wall juncture lacks metal flashing and is poorly designed, thus encouraging water entry.
Image:

Wrong - Roofing nails should not be placed where they will be exposed.

Wrong - Roofing nails should not be placed where they will be exposed.
Image:

Wrong - Roofs with complex geometries are more susceptible to ignition during a wildfire because they offer more places for burning embers to become lodged.

Wrong - Roofs with complex geometries are more susceptible to ignition during a wildfire because they offer more places for burning embers to become lodged.
Image:

Wrong - Step flashing is missing where the gable meets roof and the valley flashing is incorrectly on top of rather than under shingles.

Wrong - Step flashing is missing where the gable meets roof and the valley flashing is incorrectly on top of rather than under shingles.
Image:

Wrong - The roof insulation panels for this building were not installed in multiple layers with joints offset. The snow melt pattern shows thermal bypasses at the insulation panel joints.

Wrong - The roof insulation panels for this building were not installed in multiple layers with joints offset. The snow melt pattern shows thermal bypasses at the insulation panel joints.
Image:

Wrong - The siding on the chimney is rotten because there is no metal step flashing at the base of the chimney.

Wrong - The siding on the chimney is rotten because there is no metal step flashing at the base of the chimney.
Image:

Wrong - The studs added for support were cut at an angle providing weak support where the stud meets the compression block.

Wrong - The studs added for support were cut at an angle providing weak support where the stud meets the compression block.
Image:

Wrong - There is no step flashing along the base of the gable and the right window is missing sill trim.

Wrong - There is no step flashing along the base of the gable and the right window is missing sill trim.
Image:

Wrong - This concrete roof was not adequately attached and reinforced and failed in high winds.

Wrong - This concrete roof was not adequately attached and reinforced and failed in high winds.
Image:

Wrong - this gutter downspout is not connected.

Wrong - this gutter downspout is not connected.
Image:

Wrong - This roof failed in high winds due to lack of metal attachments to the framing.

Wrong - This roof failed in high winds due to lack of metal attachments to the framing.
Image:

Wrong - This tile roof was damaged by high winds.

Wrong - This tile roof was damaged by high winds.
Image:

Wrong - Toe nails in roof truss are set too low in framing bracket and hurricane strap is set too high so lower nails don't hit lower 2x6 of top plate.

Wrong - Toe nails in roof truss are set too low in framing bracket and hurricane strap is set too high so lower nails don't hit lower 2x6 of top plate.
Image:

Wrong – Air barrier not sealed between porch attic and conditioned space

Wrong – Air barrier not sealed between porch attic and conditioned space