Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 745 - 768 of 879 results:

Image:

This home’s south-facing roof provides adequate space for both a solar electric system and solar thermal hot water system.

This home’s south-facing roof provides adequate space for both a solar electric system and solar thermal hot water system.
Image:

This house design in the Hot-Humid climate uses a slab foundation, masonry walls, and an Exterior Insulation Finish System (EIFS) cladding.

This house design in the Hot-Humid climate uses a slab foundation, masonry walls, and an Exterior Insulation Finish System (EIFS) cladding.
Image:

This metal shutter has top and bottom tracks that are permanently anchored to the wall (FEMA 577).

This metal shutter has top and bottom tracks that are permanently anchored to the wall (FEMA 577).
Image:

This roof is hurricane proofed with a coated insulated OSB deck sheathing that is caulked and taped at all seams with a water-resistant tape, then fully covered with a peel-and-stick membrane, and asphalt shingles.

This roof is hurricane proofed with a coated insulated OSB deck sheathing that is caulked and taped at all seams with a water-resistant tape, then fully covered with a peel-and-stick membrane, and asphalt shingles.
Image:

This roof was constructed to meet the IBHS Fortified Roof standard by sealing the decking seams with flashing tape, installing synthetic roof underlayment secured with metal drip edge and nailed every six inches, and using self-adhered starter shingles.

This roof was constructed to meet the IBHS Fortified Roof standard by sealing the decking seams with flashing tape, installing synthetic roof underlayment secured with metal drip edge and nailed every six inches, and using self-adhered starter shingles.
Image:

This roof was insulated above the roof deck with 5.5 inches (R-38.5) of closed-cell spray foam.

This roof was insulated above the roof deck with 5.5 inches (R-38.5) of closed-cell spray foam.
Image:

This search for metal roofing products on the CRRC Rated Roof Products Directory highlights the initial and 3-year aged SRI values for each product

This search for metal roofing products on the CRRC Rated Roof Products Directory highlights the initial and 3-year aged SRI values for each product
Image:

This simplified decision tree can help a homeowner or contractor assess how appropriate a cool roof or wall will be for a particular home

This simplified decision tree can help a homeowner or contractor assess how appropriate a cool roof or wall will be for a particular home
Image:

This vinyl siding melted when exposed to the high heat of a wildfire.

This vinyl siding melted when exposed to the high heat of a wildfire.
Image:

Three inches of closed-cell spray foam (R-19) and 7.5 inches (R-28) of open-cell spray foam was installed below the roof sheathing in this cathedral ceiling.

Three inches of closed-cell spray foam (R-19) and 7.5 inches (R-28) of open-cell spray foam was installed below the roof sheathing in this cathedral ceiling.
Image:

Three locations and methods for installing a roof deck radiant barrier in new construction

Three locations and methods for installing a roof deck radiant barrier in new construction
Image:

To keep water out, flashing should be integrated with the house wrap, siding, and shingles or roof tiles.

To keep water out, flashing should be integrated with the house wrap, siding, and shingles or roof tiles.
Image:

To reduce the risk of condensation on the interior of the roof sheathing in cold weather, the ratio of exterior (above-deck) insulation must be increased as a percent of total attic insulation as outside temperature decreases

To reduce the risk of condensation on the interior of the roof sheathing in cold weather, the ratio of exterior (above-deck) insulation must be increased as a percent of total attic insulation as outside temperature decreases
Image:

Tornado, Hurricane, and Earthquake Risk Profile of 379 U.S. Urban Areas

Tornado, Hurricane, and Earthquake Risk Profile of 379 U.S. Urban Areas
Image:

Traditional roof trusses pinch insulation where the roof meets the walls.

Traditional roof trusses pinch insulation where the roof meets the walls.
Image:

Typical Concrete Tile Roofs in Florida

Typical Concrete Tile Roofs in Florida
Image:

Typical roof truss top chord bracing

Typical roof truss top chord bracing
Image:

Typical siting and emergency vehicle turnaround requirements for a private residential cistern for fire protection.

Typical siting and emergency vehicle turnaround requirements for a private residential cistern for fire protection.
Image:

Underneath the roof sheathing and two exterior layers of rigid foam, the builder stapled netting to the underside of the rafters and filled the roof cavities of the unvented attic with blown-in fiberglass insulation.

Underneath the roof sheathing and two exterior layers of rigid foam, the builder stapled netting to the underside of the rafters and filled the roof cavities of the unvented attic with blown-in fiberglass insulation.
Presentation:

Understanding the Wildfire Threat to Homes

Understanding the Wildfire Threat to Homes
Image:

Unvented roof assembly at eave retrofitted with rigid foam, spray foam, and a fully adhered membrane seal at the top of wall-to-roof transition

Unvented roof assembly at eave retrofitted with rigid foam, spray foam, and a fully adhered membrane seal at the top of wall-to-roof transition
Image:

Unvented roof assembly at eave retrofitted with rigid foam, spray foam, and taped top edge of existing house wrap or building paper

Unvented roof assembly at eave retrofitted with rigid foam, spray foam, and taped top edge of existing house wrap or building paper
Image:

Unvented roof assembly at rake retrofitted with a filler piece and taped top edge of existing house wrap or building paper to seal the top of wall-to-roof transition

Unvented roof assembly at rake retrofitted with a filler piece and taped top edge of existing house wrap or building paper to seal the top of wall-to-roof transition
Image:

Unvented roof assembly at rake retrofitted with spray foam installed along the underside of the roof deck and extended to the rake edge to insulate and air seal the attic

Unvented roof assembly at rake retrofitted with spray foam installed along the underside of the roof deck and extended to the rake edge to insulate and air seal the attic