Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 361 - 384 of 1416 results:

Image:

Ducts should not be located in exterior wall cavities

Ducts should not be located in exterior wall cavities
Image:

Durability concerns on a house continuously sheathed with a proprietary fiber structural panel used as bracing. Photo 1 of 2.

Durability concerns on a house continuously sheathed with a proprietary fiber structural panel used as bracing. Photo 1 of 2.
Image:

Durability concerns on a house continuously sheathed with a proprietary fiber structural panel used as bracing. Photo 2 of 2.

Durability concerns on a house continuously sheathed with a proprietary fiber structural panel used as bracing. Photo 2 of 2.
Image:

Durable masonry walls provide resistance to high winds.

Durable masonry walls provide resistance to high winds.
Image:

Each floor of this two-story modular home is constructed in a factory, including the 2x6, 24-inch on-center walls, R-21 fiberglass batt cavity insulation, and rigid exterior foam, housewrap, windows, and trim, then connected on site.

Each floor of this two-story modular home is constructed in a factory, including the 2x6, 24-inch on-center walls, R-21 fiberglass batt cavity insulation, and rigid exterior foam, housewrap, windows, and trim, then connected on site.
Image:

East- and west-facing walls receive significantly more sun than north- and south-facing walls in the summertime

East- and west-facing walls receive significantly more sun than north- and south-facing walls in the summertime
Image:

Easy access

Easy access
Video:

Efficient Lateral Load Resisting Systems for Low Rise Buildings

Image:

End conditions for braced wall lines with continuous sheathing, Figure R602.10.7 in the IRC

End conditions for braced wall lines with continuous sheathing, Figure R602.10.7 in the IRC
Image:

End wall failure under hurricane force winds due to inadequate bracing of the gable end wall.

End wall failure under hurricane force winds due to inadequate bracing of the gable end wall.
Image:

Ensure that planter boxes have a water-proof backing that separates them from the wall to prevent moisture damage and water intrusion into the wall behind them.

Ensure that planter boxes have a water-proof backing that separates them from the wall to prevent moisture damage and water intrusion into the wall behind them.
Image:

EPA Radon Zone Map

EPA Radon Zone Map
Image:

Example A of a gable truss and gable end wall bracing for a home in a hurricane region

Example A of a gable truss and gable end wall bracing for a home in a hurricane region
Image:

Example B of a gable truss and gable end wall bracing for a home in a hurricane region

Example B of a gable truss and gable end wall bracing for a home in a hurricane region
Image:

Example of a properly braced gable end wall

Example of a properly braced gable end wall
Image:

Example of masonry construction. Wall separated from building envelope due to inadequate vertical wall reinforcing in connection to horizontal tie-beam.

Example of masonry construction. Wall separated from building envelope due to inadequate vertical wall reinforcing in connection to horizontal tie-beam.
Image:

Example of the advanced framing technique, double-stud wall cavity, which will later be filled with blown insulation

Example of the advanced framing technique, double-stud wall cavity, which will later be filled with blown insulation
Image:

Existing flat roof and wood-framed walls are retrofitted with a new fully adhered air barrier membrane plus polyisocyanurate rigid foam insulation and a roofing membrane water control layer

Existing flat roof and wood-framed walls are retrofitted with a new fully adhered air barrier membrane plus polyisocyanurate rigid foam insulation and a roofing membrane water control layer
Image:

Existing low-slope (“flat”) roof and brick masonry walls with a new fully adhered air barrier membrane plus polyisocyanurate rigid foam insulation and a roofing membrane water control layer

Existing low-slope (“flat”) roof and brick masonry walls with a new fully adhered air barrier membrane plus polyisocyanurate rigid foam insulation and a roofing membrane water control layer
Image:

Existing stud wall filled with closed-cell spray foam cavity insulation

Existing stud wall filled with closed-cell spray foam cavity insulation
Image:

Existing stud wall filled with open cell spray foam cavity insulation

Existing stud wall filled with open cell spray foam cavity insulation
Image:

Existing wall-to-lower roof transition retrofitted with a new strip of fully adhered air control transition membrane, new step flashing, new roof underlayment, and new cladding

Existing wall-to-lower roof transition retrofitted with a new strip of fully adhered air control transition membrane, new step flashing, new roof underlayment, and new cladding
Image:

Existing wall-to-lower roof transition with a new strip of fully adhered air control transition membrane, new step flashing, new roof underlayment, and new cladding – view from eave

Existing wall-to-lower roof transition with a new strip of fully adhered air control transition membrane, new step flashing, new roof underlayment, and new cladding – view from eave
Image:

Existing wall-to-lower roof with attic transition with a new strip of fully adhered air control transition membrane, new step flashing, new roof underlayment, and new cladding – view from eave

Existing wall-to-lower roof with attic transition with a new strip of fully adhered air control transition membrane, new step flashing, new roof underlayment, and new cladding – view from eave