Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 289 - 312 of 336 results:

Image:

This roof is hurricane proofed with a coated insulated OSB deck sheathing that is caulked and taped at all seams with a water-resistant tape, then fully covered with a peel-and-stick membrane, and asphalt shingles.

This roof is hurricane proofed with a coated insulated OSB deck sheathing that is caulked and taped at all seams with a water-resistant tape, then fully covered with a peel-and-stick membrane, and asphalt shingles.
Image:

To reduce the risk of condensation on the interior of the roof sheathing in cold weather, the ratio of exterior (above-deck) insulation must be increased as a percent of total attic insulation as outside temperature decreases

To reduce the risk of condensation on the interior of the roof sheathing in cold weather, the ratio of exterior (above-deck) insulation must be increased as a percent of total attic insulation as outside temperature decreases
Image:

Two layers of XPS are installed with staggered seams over a liquid-applied membrane on the structural sheathing

Two layers of XPS are installed with staggered seams over a liquid-applied membrane on the structural sheathing
Image:

Two types of paint-on flashing (green and red) are installed on the walls and around the windows, over the coated sheathing which is taped at the seams.

Two types of paint-on flashing (green and red) are installed on the walls and around the windows, over the coated sheathing which is taped at the seams.
Image:

Typical Concrete Tile Roofs in Florida

Typical Concrete Tile Roofs in Florida
Image:

Unfaced fiberglass batt insulation is installed to completely fill the wall cavities and is sliced to fit around wiring, piping, and other obstructions in the wall cavities

Unfaced fiberglass batt insulation is installed to completely fill the wall cavities and is sliced to fit around wiring, piping, and other obstructions in the wall cavities
Image:

Unvented roof assembly at eave retrofitted with rigid foam, spray foam, and taped top edge of existing house wrap or building paper

Unvented roof assembly at eave retrofitted with rigid foam, spray foam, and taped top edge of existing house wrap or building paper
Image:

Unvented roof assembly at rake retrofitted with a filler piece and taped top edge of existing house wrap or building paper to seal the top of wall-to-roof transition

Unvented roof assembly at rake retrofitted with a filler piece and taped top edge of existing house wrap or building paper to seal the top of wall-to-roof transition
Image:

Upper-floor tie to lower floor for two-story building. Floor tie anchor and nailed wall sheathing.

Upper-floor tie to lower floor for two-story building. Floor tie anchor and nailed wall sheathing.
Image:

Use flashing tape to seal around any pipes or vents that penetrate through the foam

Use flashing tape to seal around any pipes or vents that penetrate through the foam
Video:

Wall Bracing: Satisfy the code with strong, resilient, fully sheathed walls

Video:

Wallingford Passive House | Exterior Assembly Details

Video:

Waverly Home Addition | Exterior Cladding Details

Presentation:

What’s New with Indoor airPLUS Version 2: What Builders and Verifiers Need to Know

Image:

When condensation forms on the interior side of wall sheathing and is not able to dry out, it can lead to mold growth and rotting of wall sheathing and framing

When condensation forms on the interior side of wall sheathing and is not able to dry out, it can lead to mold growth and rotting of wall sheathing and framing
Image:

When installing fasteners in roof sheathing, common mistakes include using the wrong size fasteners, missing the framing members, overdriving nails, and using too many or too few fasteners.

When installing fasteners in roof sheathing, common mistakes include using the wrong size fasteners, missing the framing members, overdriving nails, and using too many or too few fasteners.
Video:

Why A Sealed FORTIFIED Roof

Image:

Wind path and uplift force for a gabled roof, a hip roof, and a pyramidal (another variant of a hip) roof design

Wind path and uplift force for a gabled roof, a hip roof, and a pyramidal (another variant of a hip) roof design
Video:

Wind Resistant Roof Types

Image:

Window does not meet 2009 IECC requirements

Window does not meet 2009 IECC requirements
Image:

Window meets 2009 IECC requirements

Window meets 2009 IECC requirements
Image:

With a quality installation, tape can last a long time

With a quality installation, tape can last a long time
Image:

With the nailed block method, wood blocks are attached to the sill plate and the cripple wall plywood is attached to the block to provide shear strength for correctly bracing a cripple wall in a seismic retrofit

With the nailed block method, wood blocks are attached to the sill plate and the cripple wall plywood is attached to the block to provide shear strength for correctly bracing a cripple wall in a seismic retrofit
Video:

Wood Frame and Steel Sheathing Tornado Safe Room