Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 913 - 936 of 972 results:

Image:

Wrong – Drop down stairs do not have insulation cover installed

Wrong – Drop down stairs do not have insulation cover installed
Image:

Wrong – Fibrous insulation does not air seal

Wrong – Fibrous insulation does not air seal
Image:

Wrong – Fibrous insulation is not an air barrier and cannot be used for sealing holes.

Wrong – Fibrous insulation is not an air barrier and cannot be used for sealing holes.
Image:

Wrong – Fibrous insulation is not an air barrier and cannot be used for sealing holes.

Wrong – Fibrous insulation is not an air barrier and cannot be used for sealing holes.
Image:

Wrong – Fibrous insulation is not an air barrier and cannot be used to air-seal openings.

Wrong – Fibrous insulation is not an air barrier and cannot be used to air-seal openings.
Image:

Wrong – Gable end vents can circumvent soffit-to-ridge airflow and allow in wind-driven rain and wildfire embers

Wrong – Gable end vents can circumvent soffit-to-ridge airflow and allow in wind-driven rain and wildfire embers
Image:

Wrong – Hole has not been air-sealed.

Wrong – Hole has not been air-sealed.
Image:

Wrong – Hole was not neatly cut with a saw, making it difficult to seal.

Wrong – Hole was not neatly cut with a saw, making it difficult to seal.
Image:

Wrong – Holes have been cut larger than needed, making them difficult to air-seal.

Wrong – Holes have been cut larger than needed, making them difficult to air-seal.
Image:

Wrong – If roof membrane is not fully adhered, it can flutter and fail due to negative pressure from wind above and positive pressure from air leakage through roof deck below

Wrong – If roof membrane is not fully adhered, it can flutter and fail due to negative pressure from wind above and positive pressure from air leakage through roof deck below
Image:

Wrong – Incorrect location of fasteners in an roof asphalt shingle

Wrong – Incorrect location of fasteners in an roof asphalt shingle
Image:

Wrong – Kitchen exhaust has not been air sealed

Wrong – Kitchen exhaust has not been air sealed
Image:

Wrong – No air barrier between porch attic and conditioned space

Wrong – No air barrier between porch attic and conditioned space
Image:

Wrong – No air barrier between porch attic and conditioned space

Wrong – No air barrier between porch attic and conditioned space
Image:

Wrong – No blocking installed to prevent attic insulation from falling into stairs and opening

Wrong – No blocking installed to prevent attic insulation from falling into stairs and opening
Image:

Wrong – Penetration hole is larger than duct and not sealed

Wrong – Penetration hole is larger than duct and not sealed
Image:

Wrong – Rain barrel installed without an overflow spout that terminates away from foundation

Wrong – Rain barrel installed without an overflow spout that terminates away from foundation
Image:

Wrong – Roof underlayment is not fully adhered and roof deck seams are not sealed so roof is susceptible to high-wind events

Wrong – Roof underlayment is not fully adhered and roof deck seams are not sealed so roof is susceptible to high-wind events
Image:

Wrong – Roughly cut hole that is larger than the fan, making it difficult to seal

Wrong – Roughly cut hole that is larger than the fan, making it difficult to seal
Image:

Wrong – Roughly cut hole that is larger than the fan, making it difficult to seal

Wrong – Roughly cut hole that is larger than the fan, making it difficult to seal
Image:

Wrong – The asphalt shingle shim is too small and the floor joist was cut too short.

Wrong – The asphalt shingle shim is too small and the floor joist was cut too short.
Image:

Wrong – The clips holding these metal roofing panels were set too far from the roof eave (above red line) and the panels lifted in strong winds

Wrong – The clips holding these metal roofing panels were set too far from the roof eave (above red line) and the panels lifted in strong winds
Image:

Wrong – The downspout terminates too close to the foundation of the house

Wrong – The downspout terminates too close to the foundation of the house
Image:

Wrong – the exhaust terminal for a clothes dryer should not be covered with a screen which could trap lint; instead, cover it with a hooded, louvered damper

Wrong – the exhaust terminal for a clothes dryer should not be covered with a screen which could trap lint; instead, cover it with a hooded, louvered damper