Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 217 - 240 of 334 results:

Image:

Right – two-thirds of the blue butyl flashing tape is above the sheathing seam; the top edge of the butyl flashing tape is covered with clear sheathing tape that is also offset so two-thirds is above the top edge of the butyl flashing.

Right – two-thirds of the blue butyl flashing tape is above the sheathing seam; the top edge of the butyl flashing tape is covered with clear sheathing tape that is also offset so two-thirds is above the top edge of the butyl flashing.
Image:

Right: All joints in the rigid foam are taped to keep stucco out of joints for even drying. Mesh tape (shown here) is used with expanded polystyrene (EPS); acrylic sheathing tape or self-adhered membrane is used with XPS

Right: All joints in the rigid foam are taped to keep stucco out of joints for even drying. Mesh tape (shown here) is used with expanded polystyrene (EPS); acrylic sheathing tape or self-adhered membrane is used with XPS
Image:

Roof tie-down details for truss-to-wall connections from Fortified Home

Roof tie-down details for truss-to-wall connections from Fortified Home
Image:

Seal the drywall to the top plates as part of the home’s continuous air barrier

Seal the drywall to the top plates as part of the home’s continuous air barrier
Video:

Seismic & Wind Design Considerations for Wood Framed Structures

Image:

Select flooring appropriate for wet areas

Select flooring appropriate for wet areas
Presentation:

Selecting Healthy Insulation and Air Sealants

Image:

Shear Strength Comparison Between a Foundation Stud Anchor (on left) and a Shear Transfer Angle (on right)

Shear Strength Comparison Between a Foundation Stud Anchor (on left) and a Shear Transfer Angle (on right)
Image:

Siding has been removed so cellulose insulation can be dense-packed into the exterior walls of this home

Siding has been removed so cellulose insulation can be dense-packed into the exterior walls of this home
Image:

SIP homes built in coastal locations should be constructed so that the lowest level is well above the BFE.

SIP homes built in coastal locations should be constructed so that the lowest level is well above the BFE.
CAD File:

SIP panel door and wall framing

Preview Image
SIP panel door and wall framing
Image:

SIP panel walls are less susceptible to air leakage and convection issues than stick-built walls

SIP panel walls are less susceptible to air leakage and convection issues than stick-built walls
Image:

SIP panels should be stacked high, dry, and flat

SIP panels should be stacked high, dry, and flat
CAD File:

SIP roof panel detailing at eaves with an angled fascia

Preview Image
SIP roof panel detailing at eaves with an angled fascia
CAD File:

SIP roof panel detailing at the eaves with a framed overhang, a vertical fascia and soffit board

Preview Image
SIP roof panel detailing at the eaves with a framed overhang, a vertical fascia and soffit board
CAD File:

SIP roof panel detailing at the eaves with a short overhang, a vertical fascia and soffit board

Preview Image
SIP roof panel detailing at the eaves with a short overhang, a vertical fascia and soffit board
CAD File:

SIP roof panel detailing at the eaves with a vertical fascia and soffit board

Preview Image
SIP roof panel detailing at the eaves with a vertical fascia and soffit board
CAD File:

SIP roof panel detailing at the eaves with an angled fascia and soffit board

Preview Image
SIP roof panel detailing at the eaves with an angled fascia and soffit board
Image:

SIP wall and roof panels can be sealed at all seams with a tenacious air sealing tape.

SIP wall and roof panels can be sealed at all seams with a tenacious air sealing tape.
Image:

SIP walls do not require interior walls or trusses for support, providing for open interiors.

SIP walls do not require interior walls or trusses for support, providing for open interiors.
Video:

SIPschool's SIP Installation Basics: The Most Important Joint in the SIP Envelope

Image:

Spray foam adhesive provides an extra water resistant layer to the joints and seams on the inside of attics.

Spray foam adhesive provides an extra water resistant layer to the joints and seams on the inside of attics.
CAD File:

Spray foam on concrete foundation wall with framed interior wall

Preview Image
Spray foam on concrete foundation wall with framed interior wall
Image:

Spray foam provides a critical seal between the subfloor, rim joist, and sill plate

Spray foam provides a critical seal between the subfloor, rim joist, and sill plate