Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 1945 - 1968 of 2003 results:

Image:

Wrong – The below-grade concrete walls do not have any damp-proof coating

Wrong – The below-grade concrete walls do not have any damp-proof coating
Image:

Wrong – The building felt is not installed on the entire house

Wrong – The building felt is not installed on the entire house
Image:

Wrong – The clips holding these metal roofing panels were set too far from the roof eave (above red line) and the panels lifted in strong winds

Wrong – The clips holding these metal roofing panels were set too far from the roof eave (above red line) and the panels lifted in strong winds
Image:

Wrong – The corners are not properly flashed, leaving a vulnerable area in the drainage system

Wrong – The corners are not properly flashed, leaving a vulnerable area in the drainage system
Image:

Wrong – The downspout terminates too close to the foundation of the house

Wrong – The downspout terminates too close to the foundation of the house
Image:

Wrong – The drain tile is cut and now does not extend around the entire foundation footing

Wrong – The drain tile is cut and now does not extend around the entire foundation footing
Image:

Wrong – The drain tile is not installed to terminate properly and will not transport water to the exterior

Wrong – The drain tile is not installed to terminate properly and will not transport water to the exterior
Image:

Wrong – The drain tile is not wrapped in fabric and could become clogged with debris

Wrong – The drain tile is not wrapped in fabric and could become clogged with debris
Image:

Wrong – The final grade does not slope away from the house

Wrong – The final grade does not slope away from the house
Image:

Wrong – The footing drain pipe should end at least 10 feet from the foundation if above ground or should drain into a drywell or storm sewer.

Wrong – The footing drain pipe should end at least 10 feet from the foundation if above ground or should drain into a drywell or storm sewer.
Image:

Wrong – The framing and wind baffle installation will not allow for required insulation depth.

Wrong – The framing and wind baffle installation will not allow for required insulation depth.
Image:

Wrong – The framing will not allow for required insulation depth.

Wrong – The framing will not allow for required insulation depth.
Image:

Wrong – The gable end wall failed because the rigid foam sheathing was not backed up by plywood or OSB.

Wrong – The gable end wall failed because the rigid foam sheathing was not backed up by plywood or OSB.
Image:

Wrong – The gravel surrounding the drain tile is too large and will let too much debris through

Wrong – The gravel surrounding the drain tile is too large and will let too much debris through
Image:

Wrong – The insulated concrete forms at the foundation do not have a damp-proof coating

Wrong – The insulated concrete forms at the foundation do not have a damp-proof coating
Image:

Wrong – The metal shingles and battens were inadequately secured

Wrong – The metal shingles and battens were inadequately secured
Image:

Wrong – The polyethylene sheeting vapor barrier is not attached to the piers with mechanical fasteners

Wrong – The polyethylene sheeting vapor barrier is not attached to the piers with mechanical fasteners
Image:

Wrong – The ridge flashing fasteners were placed too far apart and did not adequately hold the flashing in place

Wrong – The ridge flashing fasteners were placed too far apart and did not adequately hold the flashing in place
Image:

Wrong – The rigid sheathing seams are not taped and the gaps could cause moisture problems

Wrong – The rigid sheathing seams are not taped and the gaps could cause moisture problems
Image:

Wrong – The step flashing is not the required height above the roof deck

Wrong – The step flashing is not the required height above the roof deck
Image:

Wrong – The sump pump does not have a cover

Wrong – The sump pump does not have a cover
Image:

Wrong – The sump pump does not have a cover

Wrong – The sump pump does not have a cover
Image:

Wrong – The underside of the first course of siding extends beyond the underlying sheathing leaving it vulnerable being pulled off by pressure from high winds.

Wrong – The underside of the first course of siding extends beyond the underlying sheathing leaving it vulnerable being pulled off by pressure from high winds.
Image:

Wrong – The vapor barrier is not secured to the walls of this crawlspace.

Wrong – The vapor barrier is not secured to the walls of this crawlspace.