Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 1489 - 1512 of 1542 results:

Image:

Wrong – Airborne embers can float into holes in damaged vent screens and ignite flammable items in the house or accumulated debris in the vent.

Wrong – Airborne embers can float into holes in damaged vent screens and ignite flammable items in the house or accumulated debris in the vent.
Image:

Wrong – Attic access panel does not have an insulation cover installed

Wrong – Attic access panel does not have an insulation cover installed
Image:

Wrong – Compression and misalignment because insulation is not split around plumbing

Wrong – Compression and misalignment because insulation is not split around plumbing
Image:

Wrong – Compression and misalignment because insulation is not split around wires

Wrong – Compression and misalignment because insulation is not split around wires
Image:

Wrong – Conventional T-post detail is extremely difficult to insulate and usually doesn't happen

Wrong – Conventional T-post detail is extremely difficult to insulate and usually doesn't happen
Image:

Wrong – Design walls so that windows are positioned to fit regularly spaced studs so less additional studs are needed.

Wrong – Design walls so that windows are positioned to fit regularly spaced studs so less additional studs are needed.
Image:

Wrong – Don’t use nails to fasten poly vapor barrier around flex ducts; it will allow moist air to reach the ducts where it could condense and ruin the insulation.

Wrong – Don’t use nails to fasten poly vapor barrier around flex ducts; it will allow moist air to reach the ducts where it could condense and ruin the insulation.
Image:

Wrong – Drop down stairs do not have insulation cover installed

Wrong – Drop down stairs do not have insulation cover installed
Image:

Wrong – Either this tape was not pressed down firmly or the surface was wet or dirty so the tape is not sticking properly even during construction.

Wrong – Either this tape was not pressed down firmly or the surface was wet or dirty so the tape is not sticking properly even during construction.
Image:

Wrong – Excessive framing will not allow corner to be insulated

Wrong – Excessive framing will not allow corner to be insulated
Image:

Wrong – Framing does not allow corner to be insulated

Wrong – Framing does not allow corner to be insulated
Image:

Wrong – Framing does not allow corner to be insulated

Wrong – Framing does not allow corner to be insulated
Image:

Wrong – Framing does not allow corner to be insulated

Wrong – Framing does not allow corner to be insulated
Image:

Wrong – If the insulated sheathing will serve as an air barrier and drainage plane, any cuts and seams must be taped or sealed.

Wrong – If the insulated sheathing will serve as an air barrier and drainage plane, any cuts and seams must be taped or sealed.
Image:

Wrong – Insulated sheathing seams should align with framing members

Wrong – Insulated sheathing seams should align with framing members
Image:

Wrong – Insulation has misalignment, compression, and gaps

Wrong – Insulation has misalignment, compression, and gaps
Image:

Wrong – Insulation will not be aligned with air barrier

Wrong – Insulation will not be aligned with air barrier
Image:

Wrong – It is difficult to test the air flow in this fresh air intake duct due to poor access and inadequate length of straight duct to get an accurate in-line flow measurement.

Wrong – It is difficult to test the air flow in this fresh air intake duct due to poor access and inadequate length of straight duct to get an accurate in-line flow measurement.
Image:

Wrong – No blocking installed to prevent attic insulation from falling into stairs and opening

Wrong – No blocking installed to prevent attic insulation from falling into stairs and opening
Image:

Wrong – No rigid backing was installed on the attic knee wall.

Wrong – No rigid backing was installed on the attic knee wall.
Image:

Wrong – No top plate was installed.

Wrong – No top plate was installed.
Image:

Wrong – Rigid insulation is being installed without cap nails

Wrong – Rigid insulation is being installed without cap nails
Image:

Wrong – Roof underlayment is not fully adhered and roof deck seams are not sealed so roof is susceptible to high-wind events

Wrong – Roof underlayment is not fully adhered and roof deck seams are not sealed so roof is susceptible to high-wind events
Image:

Wrong – Slab insulation does not extend to the top of the slab

Wrong – Slab insulation does not extend to the top of the slab