Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 193 - 216 of 519 results:

CAD File:

IBHS Fortified Home Felt Underlayment Roof Deck

Preview Image
IBHS Fortified Home Felt Underlayment Roof Deck
CAD File:

IBHS Fortified Home Flashing Tape Sealed Roof Deck

Preview Image
IBHS Fortified Home Flashing Tape Sealed Roof Deck
CAD File:

IBHS Fortified Home Roof Deck Attachment for High Winds

Preview Image
IBHS Fortified Home Roof Deck Attachment for High Winds
CAD File:

IBHS Fortified Home Roof Tile Cap Sheet Sealed Roof Deck

Preview Image
IBHS Fortified Home Roof Tile Cap Sheet Sealed Roof Deck
CAD File:

IBHS Fortified Home Spray Foam Sealed Roof Deck

Preview Image
IBHS Fortified Home Spray Foam Sealed Roof Deck
CAD File:

IBHS Fortified Home Wood Board Roof Deck

Preview Image
IBHS Fortified Home Wood Board Roof Deck
Image:

If a dropped soffit is used to house a duct, the soffit space must equal the duct diameter plus the insulation thickness

If a dropped soffit is used to house a duct, the soffit space must equal the duct diameter plus the insulation thickness
Image:

If airflow must be limited to a supply register, use balancing dampers at the trunk line rather than looping duct to control airflow

If airflow must be limited to a supply register, use balancing dampers at the trunk line rather than looping duct to control airflow
Image:

If filter is inaccessible, locate the air filter between the return air plenum and the air handler box

If filter is inaccessible, locate the air filter between the return air plenum and the air handler box
Image:

If furnace is accessible, locate the air filter between the return air plenum and the air handler box

If furnace is accessible, locate the air filter between the return air plenum and the air handler box
Image:

If HVAC duct must be installed in an exterior wall, separate it from the exterior with at least R-6 of continuous rigid insulation

If HVAC duct must be installed in an exterior wall, separate it from the exterior with at least R-6 of continuous rigid insulation
Image:

If the furnace is hard to access, locate filters at return registers covered by hinged grilles that are easy to open from inside the home

If the furnace is hard to access, locate filters at return registers covered by hinged grilles that are easy to open from inside the home
Image:

If the top of a window opening is not level, a shim can be cut to ensure mounting brackets installed for blinds are level to one another.

If the top of a window opening is not level, a shim can be cut to ensure mounting brackets installed for blinds are level to one another.
Image:

If wall registers are desired, install HVAC ducts in interior wall cavities

If wall registers are desired, install HVAC ducts in interior wall cavities
Image:

Improper continuous load path design lacking bracing results in the failure of gable end walls under high wind conditions.

Improper continuous load path design lacking bracing results in the failure of gable end walls under high wind conditions.
Image:

Improperly installed fuel tanks can break free from attachments under the force of flood waters, risking broken fuel lines which could cause fire or explosion. Here, the tank is tethered only by the gas piping, which is not designed to perform this functi

Improperly installed fuel tanks can break free from attachments under the force of flood waters, risking broken fuel lines which could cause fire or explosion. Here, the tank is tethered only by the gas piping, which is not designed to perform this function.
Image:

Inadequate amount of insulation installed with compression, misalignment, and voids

Inadequate amount of insulation installed with compression, misalignment, and voids
Image:

Infrared thermography during depressurization testing reveals air leakage at corner of spray foam-insulated room where wood-to-wood seams in framing were not air sealed

Infrared thermography during depressurization testing reveals air leakage at corner of spray foam-insulated room where wood-to-wood seams in framing were not air sealed
Image:

Insert the new furnace/air handler filter in the filter slot of the furnace or air handler with the arrow pointed in the direction of air flow.

Insert the new furnace/air handler filter in the filter slot of the furnace or air handler with the arrow pointed in the direction of air flow.
Video:

Inside FORTIFIED Talking with the Roofer NCIUA

Video:

Inside FORTIFIED: Fastening Sheathing on New Roofs in High Wind & Hail Areas

Video:

Inside FORTIFIED: Installing Drip Edge in Hurricane Areas

Video:

Inside FORTIFIED: Installing Self-Adhered Starter Strips

Video:

Inside FORTIFIED: Installing Starter Strips Using Roof Cement