Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 49 - 72 of 327 results:

Case Study:

Builders Challenge High Performance Builder Spotlight: Tommy Williams Homes

Case Study:

Building America Case Study Technology Solutions for Existing Homes: Concord Four Square Retrofit

Case Study:

Building America Case Study: Simplified Air Distribution, Desuperheaters, and Sub-Slab Geothermal Heat Exchangers

Case Study:

Building America Case Study: Standard- Versus High-Velocity Air Distribution in High-Performance Townhomes

Case Study:

Building America Top Innovations 2013: High-Efficiency Window Air Conditioners

Case Study:

Building America Top Innovations 2013: High-Performance Furnace Blowers

Presentation:

Building America Webinar: High Performance Space Conditioning Systems, Part I

Building America Webinar: High Performance Space Conditioning Systems, Part I
Presentation:

Building America Webinar: High Performance Space Conditioning Systems, Part II

Building America Webinar: High Performance Space Conditioning Systems, Part II
Presentation:

Building America Webinar: New Construction Hybrid-Ductless Heat Pumps Study: Resistance is Futile

Building America Webinar: New Construction Hybrid-Ductless Heat Pumps Study: Resistance is Futile
Presentation:

Building America Webinar: Retrofitting Central Space Conditioning Strategies for Multifamily Buildings

Building America Webinar: Retrofitting Central Space Conditioning Strategies for Multifamily Buildings
Image:

By plotting the heating capacities at -4°F and 5°F and drawing a line between them, the capacity at 0°F can be estimated

By plotting the heating capacities at -4°F and 5°F and drawing a line between them, the capacity at 0°F can be estimated
Image:

Calibrations are specific to each airflow station model and size and are needed to convert measured station pressure to airflow

Calibrations are specific to each airflow station model and size and are needed to convert measured station pressure to airflow
Image:

Category III oil-fired, sealed-combustion boiler configured as a direct-vented appliance that draws its combustion air from outside

Category III oil-fired, sealed-combustion boiler configured as a direct-vented appliance that draws its combustion air from outside
Image:

Category III oil-fired, sealed-combustion boiler with the burner assembly cover removed

Category III oil-fired, sealed-combustion boiler with the burner assembly cover removed
Image:

Category IV oil-fired condensing boiler with direct vent pipe

Category IV oil-fired condensing boiler with direct vent pipe
Image:

Collars that are specifically made for flexible duct have a raised bead to prevent the duct from slipping off

Collars that are specifically made for flexible duct have a raised bead to prevent the duct from slipping off
Case Study:

Colleyville Eco House Prototype

Image:

Combined space and water heating system with tankless gas water heater

Combined space and water heating system with tankless gas water heater
Image:

Concept behind an evaporative cooler – warm air is cooled as the air passes through a wet medium and gives up some of its heat to evaporate the water

Concept behind an evaporative cooler – warm air is cooled as the air passes through a wet medium and gives up some of its heat to evaporate the water
Case Study:

Concord Cape Prototype

Image:

Condensate from this heat pump water heater is routed to a nearby floor drain, shared with the condensate lines from a condensing gas furnace and an air conditioning coil

Condensate from this heat pump water heater is routed to a nearby floor drain, shared with the condensate lines from a condensing gas furnace and an air conditioning coil
Image:

Condensing boilers have primary and secondary heat exchangers

Condensing boilers have primary and secondary heat exchangers
Image:

Cool air flow is produced when the cooling cycle is energized (set thermostat to “cool”)

Cool air flow is produced when the cooling cycle is energized (set thermostat to “cool”)
Image:

Cooling air temperatures that can be achieved by a direct evaporative cooler at various outdoor conditions

Cooling air temperatures that can be achieved by a direct evaporative cooler at various outdoor conditions