Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 745 - 768 of 854 results:

Image:

To prepare for a total duct test at final, cover all of the supply outlets and return inlets

To prepare for a total duct test at final, cover all of the supply outlets and return inlets
Image:

To prepare for a total duct test at rough-in, cover all of the supply outlets and return inlets

To prepare for a total duct test at rough-in, cover all of the supply outlets and return inlets
Video:

Total Duct Leakage Tests

Image:

Total Rater-measured duct leakage ≤ 8 CFM25 per 100 sq. ft. of conditioned area

Total Rater-measured duct leakage ≤ 8 CFM25 per 100 sq. ft. of conditioned area
Image:

Transfer grill sealed with mastic

Transfer grill sealed with mastic
Image:

Transfer grille not sealed

Transfer grille not sealed
Image:

Transfer grills and jump ducts provide pathways for air to reach the centrally located HVAC return grille, even when bedroom doors are shut.

Transfer grills and jump ducts provide pathways for air to reach the centrally located HVAC return grille, even when bedroom doors are shut.
Image:

Transom returns are installed over interior doors to provide a pathway for return air

Transom returns are installed over interior doors to provide a pathway for return air
Image:

Trunk to duct connections are only mechanically fastened and not sealed

Trunk to duct connections are only mechanically fastened and not sealed
Image:

Trunk to duct connections are properly insulated and have been sealed with mastic

Trunk to duct connections are properly insulated and have been sealed with mastic
Image:

Two L-brackets or seismic snubbers are installed at each corner of the HVAC unit and a vibration isolator or spring mount is installed in each corner to anchor the unit while allowing for slight movement in an earthquake

Two L-brackets or seismic snubbers are installed at each corner of the HVAC unit and a vibration isolator or spring mount is installed in each corner to anchor the unit while allowing for slight movement in an earthquake
Image:

Two pieces of flex duct are spliced together with a metal sleeve, nylon draw bands, mastic, metal tape, and more mastic

Two pieces of flex duct are spliced together with a metal sleeve, nylon draw bands, mastic, metal tape, and more mastic
Image:

Typical coaxial coil (liquid-to-refrigerant heat exchanger) used in a ground-source heat pump

Typical coaxial coil (liquid-to-refrigerant heat exchanger) used in a ground-source heat pump
Image:

Typical ground-source plumbed system

Typical ground-source plumbed system
Video:

University of Minnesota-NorthernSTAR: A Natural Gas-Fired Combi System for Space Heating and Hot Water

Image:

Use only Underwriters Laboratory UL-181 approved tape

Use only Underwriters Laboratory UL-181 approved tape
Presentation:

Variable Capacity Comfort Systems and Smart Ventilation Systems in High-Performance Homes

Variable Capacity Comfort Systems and Smart Ventilation Systems in High-Performance Homes
Image:

Velocity measurement locations for round and rectangular ducts; velocity measurements should be taken at several locations representative of equal sectional areas across the duct cross-sectional area

Velocity measurement locations for round and rectangular ducts; velocity measurements should be taken at several locations representative of equal sectional areas across the duct cross-sectional area
Image:

Vented Attic vs Unvented Cathedral Attic Air Flow

Vented Attic vs Unvented Cathedral Attic Air Flow
Image:

Ventilation air comes directly from outdoors, not from adjacent dwelling units, garages, crawlspaces, or attics

Ventilation air comes directly from outdoors, not from adjacent dwelling units, garages, crawlspaces, or attics
Image:

Ventilation air inlet is too close to exhaust outlet

Ventilation air inlet is too close to exhaust outlet
Image:

Ventilation air inlet is too close to exhaust outlet

Ventilation air inlet is too close to exhaust outlet
Image:

Ventilation air inlets ≥ 2 ft. above grade or roof deck in Climate Zones 1-3 or ≥ 4 ft. above grade or roof deck in Climate Zones 4-8 and not obstructed

Ventilation air inlets ≥ 2 ft. above grade or roof deck in Climate Zones 1-3 or ≥ 4 ft. above grade or roof deck in Climate Zones 4-8 and not obstructed
Image:

Ventilation air inlets located ≥10 ft. of stretched-string distance from known contamination sources such as stack, vent, exhaust hood, or vehicle exhaust

Ventilation air inlets located ≥10 ft. of stretched-string distance from known contamination sources such as stack, vent, exhaust hood, or vehicle exhaust