Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 217 - 240 of 589 results:

Image:

If spray foam is used to air seal over backer rod around the window’s rough opening, foam should entirely cover the rod and let dry then trimmed flush to frame

If spray foam is used to air seal over backer rod around the window’s rough opening, foam should entirely cover the rod and let dry then trimmed flush to frame
Image:

If the top of a window opening is not level, a shim can be cut to ensure mounting brackets installed for blinds are level to one another.

If the top of a window opening is not level, a shim can be cut to ensure mounting brackets installed for blinds are level to one another.
Image:

Imagine Homes installs double-paned, vinyl-framed, low-e windows to minimize solar heat gain in San Antonio.

Imagine Homes installs double-paned, vinyl-framed, low-e windows to minimize solar heat gain in San Antonio.
Image:

In a comparison of two homes that were identical except for windows, the home with thin-triple-pane windows showed averaged winter heating savings of 12% annually, average cooling season savings of 28%, and peak savings of 17% to 33% compared to the home

In a comparison of two homes that were identical except for windows, the home with thin-triple-pane windows showed averaged winter heating savings of 12% annually, average cooling season savings of 28%, and peak savings of 17% to 33% compared to the home
Image:

In areas prone to high winds and hurricanes, double vertical “jack trim” and horizontal “header” and “sill” studs are recommended on all sides of window and door openings.

In areas prone to high winds and hurricanes, double vertical “jack trim” and horizontal “header” and “sill” studs are recommended on all sides of window and door openings.
Image:

In hot, humid climates, passive cooling should focus on shading, airflow through cross ventilation and ceiling fans, and low-mass construction

In hot, humid climates, passive cooling should focus on shading, airflow through cross ventilation and ceiling fans, and low-mass construction
Image:

Infrared photometry shows the impact of a roof overhang on the south façade of a home, where the unshaded patio stonework is significantly hotter than the shaded portions of the patio and wall surfaces (temperature scale shown is in Celsius).

Infrared photometry shows the impact of a roof overhang on the south façade of a home, where the unshaded patio stonework is significantly hotter than the shaded portions of the patio and wall surfaces (temperature scale shown is in Celsius).
Image:

Insert replacement vinyl frame window

Insert replacement vinyl frame window
Image:

Install impact resistant shutters for windows not rated as impact resistant

Install impact resistant shutters for windows not rated as impact resistant.
Image:

Install insulating foam sheathing and tape all seams to serve as a continuous drainage plane behind the home’s cladding.

Install insulating foam sheathing and tape all seams to serve as a continuous drainage plane behind the home’s cladding.
Image:

Install mounting brackets for blinds using a screwdriver, socket wrench, or impact driver as needed for the type and size of screws installed.

Install mounting brackets for blinds using a screwdriver, socket wrench, or impact driver as needed for the type and size of screws installed.
Image:

Install self-adhesive sill flashing

Install self-adhesive sill flashing
Image:

Install trim and cap flashing

Install trim and cap flashing
Image:

Install weatherstripping in the framing of openable doors and windows; use caulk to seal seams in and around trim.

Install weatherstripping in the framing of openable doors and windows; use caulk to seal seams in and around trim.
Image:

Installation of permanent exterior low-E storm windows is simple and easy, requiring a few basic tools and about 20 minutes of labor

Installation of permanent exterior low-E storm windows is simple and easy, requiring a few basic tools and about 20 minutes of labor
Image:

Installation of weatherstripping on a window.

Installation of weatherstripping on a window.
Image:

Installed interior removable storm window

Installed interior removable storm window
Video:

Installing European Passive House Windows #001: Window Intro

Video:

Installing European Passive House Windows #002: Rough Opening Prep

Video:

Installing European Passive House Windows #003: Sash Removal

Video:

Installing European Passive House Windows #004: Installing & Adjusting Sash

Video:

Installing European Passive House Windows #005: Interior Air Sealing

Video:

Installing European Passive House Windows #006: Exterior Over-Insulating

Video:

Installing European Passive House Windows #007: Tilt Slide Doors