Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 601 - 624 of 901 results:

Image:

Right – Start asphalt shingle installation with a starter strip set in an 8-inch strip of flashing cement

Right – Start asphalt shingle installation with a starter strip set in an 8-inch strip of flashing cement
Image:

Right – Taping the roof sheathing seams can greatly decrease the likelihood of water infiltration into a home in the event of a hurricane.

Right – Taping the roof sheathing seams can greatly increase the likelihood of water infiltration into a home in the event of a hurricane.
Image:

Right – The builder routed all vents through side walls to avoid holes in the roof.

Right – The builder routed all vents through side walls to avoid holes in the roof.
Image:

Right – The double compressor unit supplies multiple interior minisplit heat pump heads.

Right – The double compressor unit supplies multiple interior minisplit heat pump heads.
Image:

Right – The downspout pipe is far enough away from the foundation to prevent moisture problems

Right – The downspout pipe is far enough away from the foundation to prevent moisture problems
Image:

Right – The downspout terminates into a catchment system that moves water away from the foundation of the house

Right – The downspout terminates into a catchment system that moves water away from the foundation of the house
Image:

Right – The ductless minisplit in this open area is installed in the ceiling rather than on a wall.

Right – The ductless minisplit in this open area is installed in the ceiling rather than on a wall.
Image:

Right – The heavy roof underlayment was wrapped over the edges and down onto the walls, providing a continuous air barrier at this critical juncture; the second story will have narrow overhangs, matching the existing architecture style in the neighborhood

Right – The heavy roof underlayment was wrapped over the edges and down onto the walls, providing a continuous air barrier at this critical juncture; the second story will have narrow overhangs, matching the existing architecture style in the neighborhood.
Image:

Right – The ridge flashing is secured with two rows of fasteners on each side of the ridge line

Right – The ridge flashing is secured with two rows of fasteners on each side of the ridge line
Image:

Right – The roof membrane is fully adhered and deck seams are sealed so the membrane will not flutter and fail due to negative pressure from high winds

Right – The roof membrane is fully adhered and deck seams are sealed so the membrane will not flutter and fail due to negative pressure from high winds
Image:

Right – The step flashing is the correct height above the roof deck

Right – The step flashing is the correct height above the roof deck
Image:

Right – The underside of this low-sloped roof is insulated with open-cell spray foam in this dry climate to achieve the code-required R-value; the builder used the same foam to insulate exterior walls.

Right – The underside of this low-sloped roof is insulated with open-cell spray foam in this dry climate to achieve the code-required R-value; the builder used the same foam to insulate exterior walls.
Image:

Right – The water-resistant barrier is layered over the step flashing to provide a complete drainage system

Right – The water-resistant barrier is layered over the step flashing to provide a complete drainage system
Image:

Right – There is a properly installed and layered self-sealing bituminous membrane at the roof penetration

Right – There is a properly installed and layered self-sealing bituminous membrane at the roof penetration
Image:

Right – There is a self-sealing bituminous membrane installed at the valley of the roof prior to the roof felt

Right – There is a self-sealing bituminous membrane installed at the valley of the roof prior to the roof felt
Image:

Right – This fire-rated wall assembly uses exterior gypsum board and an exterior siding of fiber-cement or metal to increase fire resistance.

Right – This fire-rated wall assembly uses exterior gypsum board and an exterior siding of fiber-cement or metal to increase fire resistance.
Image:

Right – This home uses a white roof and walls to reduce solar heat gain

Right – This home uses a white roof and walls to reduce solar heat gain
Image:

Right – This home’s roof has zero penetrations because all venting is routed to gable walls.

Right – This home’s roof has zero penetrations because all venting is routed to gable walls.
Image:

Right – This hot-humid climate home employs several hurricane- and termite-resistant features including concrete block construction, borate-treated framing, a hip roof design with metal drip edge, impact-rated windows, and an unvented attic.

Right – This hot-humid climate home employs several hurricane- and termite-resistant features including concrete block construction, borate-treated framing, a hip roof design with metal drip edge, impact-rated windows, and an unvented attic.
Image:

Right – This hot-humid climate home is constructed with concrete block that is insulated on the inside with rigid foam; the framing is borate-treated lumber; the roof design is a high-wind-resistant hip roof with only one small gable over the entry.

Right – This hot-humid climate home is constructed with concrete block that is insulated on the inside with rigid foam; the framing is borate-treated lumber; the roof design is a high-wind-resistant hip roof with only one small gable over the entry.
Image:

Right – This low-slope flat roof assembly has continuity of both the air and water barriers

Right – This low-slope flat roof assembly has continuity of both the air and water barriers
Image:

Right – This low-slope roof and parapet assembly has continuity of both the air and water barriers

Right – This low-slope roof and parapet assembly has continuity of both the air and water barriers
Image:

Right – This metal roof is being coated with a cool (high SRI) coating to reduce solar heat gain

Right – This metal roof is being coated with a cool (high SRI) coating to reduce solar heat gain
Image:

Right – Under metal roofing, sheathing is protected by metal edging over a fully adhered membrane and a slip sheet of loose laid building paper

Right – Under metal roofing, sheathing is protected by metal edging over a fully adhered membrane and a slip sheet of loose laid building paper