Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 937 - 960 of 980 results:

Image:

Wrong - There is no step flashing along the base of the gable and the right window is missing sill trim.

Wrong - There is no step flashing along the base of the gable and the right window is missing sill trim.
Image:

Wrong - This concrete roof was not adequately attached and reinforced and failed in high winds.

Wrong - This concrete roof was not adequately attached and reinforced and failed in high winds.
Image:

Wrong - this gutter downspout is not connected.

Wrong - this gutter downspout is not connected.
Image:

Wrong - This roof failed in high winds due to lack of metal attachments to the framing.

Wrong - This roof failed in high winds due to lack of metal attachments to the framing.
Image:

Wrong - This tile roof was damaged by high winds.

Wrong - This tile roof was damaged by high winds.
Image:

Wrong - Toe nails in roof truss are set too low in framing bracket and hurricane strap is set too high so lower nails don't hit lower 2x6 of top plate.

Wrong - Toe nails in roof truss are set too low in framing bracket and hurricane strap is set too high so lower nails don't hit lower 2x6 of top plate.
Image:

Wrong – Air barrier not sealed between porch attic and conditioned space

Wrong – Air barrier not sealed between porch attic and conditioned space
Image:

Wrong – Air barrier not sealed between porch attic and conditioned space

Wrong – Air barrier not sealed between porch attic and conditioned space
Image:

Wrong – An open and/or sloped soffit can trap heat and burning embers as a wildfire approaches, increasing the risk of ignition of the structure.

Wrong – An open and/or sloped soffit can trap heat and burning embers as a wildfire approaches, increasing the risk of ignition of the structure.
Image:

Wrong – Gable end vents can circumvent soffit-to-ridge airflow and allow in wind-driven rain and wildfire embers

Wrong – Gable end vents can circumvent soffit-to-ridge airflow and allow in wind-driven rain and wildfire embers
Image:

Wrong – If roof membrane is not fully adhered, it can flutter and fail due to negative pressure from wind above and positive pressure from air leakage through roof deck below

Wrong – If roof membrane is not fully adhered, it can flutter and fail due to negative pressure from wind above and positive pressure from air leakage through roof deck below
Image:

Wrong – Incorrect location of fasteners in an roof asphalt shingle

Wrong – Incorrect location of fasteners in an roof asphalt shingle
Image:

Wrong – No air barrier between porch attic and conditioned space

Wrong – No air barrier between porch attic and conditioned space
Image:

Wrong – No air barrier between porch attic and conditioned space

Wrong – No air barrier between porch attic and conditioned space
Image:

Wrong – Rain barrel installed without an overflow spout that terminates away from foundation

Wrong – Rain barrel installed without an overflow spout that terminates away from foundation
Image:

Wrong – Roof underlayment is not fully adhered and roof deck seams are not sealed so roof is susceptible to high-wind events

Wrong – Roof underlayment is not fully adhered and roof deck seams are not sealed so roof is susceptible to high-wind events
Image:

Wrong – The asphalt shingle shim is too small and the floor joist was cut too short.

Wrong – The asphalt shingle shim is too small and the floor joist was cut too short.
Image:

Wrong – The clips holding these metal roofing panels were set too far from the roof eave (above red line) and the panels lifted in strong winds

Wrong – The clips holding these metal roofing panels were set too far from the roof eave (above red line) and the panels lifted in strong winds
Image:

Wrong – The downspout terminates too close to the foundation of the house

Wrong – The downspout terminates too close to the foundation of the house
Image:

Wrong – The flashing of the roof-wall juncture was installed above the roof shingles instead of below the roof shingles; also no kickout flashing was installed.

Wrong – The flashing of the roof-wall juncture was installed above the roof shingles instead of below the roof shingles; also no kickout flashing was installed.
Image:

Wrong – The metal panels covering this roof used snaplocks and concealed fasteners that gave way in high winds.

Wrong – The metal panels covering this roof used snaplocks and concealed fasteners that gave way in high winds.
Image:

Wrong – The metal shingles and battens were inadequately secured

Wrong – The metal shingles and battens were inadequately secured
Image:

Wrong – The off-ridge roof vent on the right was poorly anchored and pulled off in high winds allowing water into the home.

Wrong – The off-ridge roof vent on the right was poorly anchored and pulled off in high winds allowing water into the home.
Image:

Wrong – The open overhang with exposed timbers and unscreened vent holes make this roof more susceptible to ignition.

Wrong – The open overhang with exposed timbers and unscreened vent holes make this roof more susceptible to ignition.