Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 193 - 216 of 326 results:

Image:

Right – Deck flashing protects the deck-to-wall connection from water and burning embers.

Right – Deck flashing protects the deck-to-wall connection from water and burning embers.
Image:

Right – Every seam and nail hole in these garage-to-house walls is sealed with tape.

Right – Every seam and nail hole in these garage-to-house walls is sealed with tape.
Image:

Right – Floor above garage is a continuous air barrier

Right – Floor above garage is a continuous air barrier
Image:

Right – Fully enclosed, fire-resistant deck reduces risk of deck ignition.

Right – Fully enclosed, fire-resistant deck reduces risk of deck ignition.
Image:

Right – In wildfire prone areas, using a flat soffit with venting on the fascia instead of an angled soffit with down-facing venting reduces the risk of catching rising embers.

Right – In wildfire prone areas, using a flat soffit with venting on the fascia instead of an angled soffit with down-facing venting reduces the risk of catching rising embers.
Image:

Right – Insulation is in contact with floor above

Right – Insulation is in contact with floor above
Image:

Right – Metal flashing is installed between the deck boards and house wall with the top of the flashing extending up behind the siding and the bottom of the flashing extending out and down over the ledger board

Right – Metal flashing is installed between the deck boards and house wall with the top of the flashing extending up behind the siding and the bottom of the flashing extending out and down over the ledger board
Image:

Right – Spray foam insulates the walls and ceilings separating the garage from the home.

Right – Spray foam insulates the walls and ceilings separating the garage from the home.
Image:

Right – The band joist over this wall was properly insulated and air-sealed.

Right – The band joist over this wall was properly insulated and air-sealed.
Image:

Right – This fire-rated wall assembly uses exterior gypsum board and an exterior siding of fiber-cement or metal to increase fire resistance.

Right – This fire-rated wall assembly uses exterior gypsum board and an exterior siding of fiber-cement or metal to increase fire resistance.
Image:

Right – To make decks more fire-resistant, enclose the bottom of the deck with a non-flammable skirt, and surround the deck with a non-flammable surface like pavers.

Right – To make decks more resistant to fires, enclose the bottom of the deck with a non-flammable skirt, and surround the deck with a non-flammable surface like pavers.
Image:

Right – To make decks more resistant to fires, for floor joists and beams, use heavy fire-retardant-treated timbers, concrete, or steel framing; for decking and stair treads, use treated wood, brick, or concrete pavers; and for railings, use treated wood,

Right – To make decks more resistant to fires, for floor joists and beams, use heavy fire-retardant-treated timbers, concrete, or steel framing; for decking and stair treads, use treated wood, brick, or concrete pavers; and for railings, use treated wood, metal, cables, or tempered glass.
Image:

Right – Trimming tree branches a minimum of 10 feet from the house or any attached structures reduces the risk of home ignition.

Right – Trimming tree branches a minimum of 10 feet from the house or any attached structures reduces the risk of home ignition.
Image:

Right – Trimming tree canopies a minimum of 10 feet from the house reduces the risk of home ignition.

Right – Trimming tree canopies a minimum of 10 feet from the house reduces the risk of home ignition.
Image:

Rigid foam insulating sheathing installed over an existing garage ceiling with retrofits to air seal exterior wall before adding exterior wall insulating sheathing

Rigid foam insulating sheathing installed over an existing garage ceiling with retrofits to air seal exterior wall before adding exterior wall insulating sheathing
Image:

Rigid foam insulating sheathing is installed on existing garage ceiling and covered with a new gypsum board fire protection layer installed over the foam.

Rigid foam insulating sheathing is installed on existing garage ceiling and covered with a new gypsum board fire protection layer installed over the foam.
Image:

Rigid foam insulation is installed on the garage side of the shared garage wall and roof of an existing home

Rigid foam insulation is installed on the garage side of the shared garage wall and roof of an existing home
Image:

Rigid insulation and air-sealing can be used to thermally isolate garages from interior occupied space in multifamily row houses/townhouses.

Rigid insulation and air-sealing can be used to thermally isolate garages from interior occupied space in multifamily row houses/townhouses.
Image:

Rigid insulation and air-sealing can be used to thermally isolate garages from multifamily row houses/town houses with basement foundations in IECC Climate Zones 3 or higher.

Rigid insulation and air-sealing can be used to thermally isolate garages from multifamily row houses/town houses with basement foundations in IECC Climate Zones 3 or higher.
Image:

Rigid insulation can be used as a thermal break between a garage slab with a heated plenum space and a separately cast garage slab without a heated plenum space.

Rigid insulation can be used as a thermal break between a garage slab with a heated plenum space and a separately cast garage slab without a heated plenum space.
Image:

Sealed blocking

Sealed blocking
Image:

Side view showing air-sealing and rigid foam insulation is installed over existing wall and ceiling under a room above, then covered with new gypsum board.

Side view showing air-sealing and rigid foam insulation is installed over existing wall and ceiling under a room above, then covered with new gypsum board.
Image:

Side view showing how the existing garage wall and ceiling are air-sealed prior to installing rigid foam insulation on the garage side of the shared wall of an existing home.

Side view showing how the existing garage wall and ceiling are air-sealed prior to installing rigid foam insulation on the garage side of the shared wall of an existing home.
Image:

Small spacer strips consisting of ¼-inch plastic strips provide a drainage gap behind wall cladding with a gap that is too small to pose a fire risk from embers entering the gap.

Small spacer strips consisting of ¼-inch plastic strips provide a drainage gap behind wall cladding with a gap that is too small to pose a fire risk from embers entering the gap.