Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 97 - 105 of 105 results:

Image:

Wrong - The fiberglass blanket insulation has no perforated vapor retarder, does not cover the entire basement wall, is not sealed at the edges, and is not installed over rigid foam.

Wrong - The fiberglass blanket insulation has no perforated vapor retarder, does not cover the entire basement wall, is not sealed at the edges, and is not installed over rigid foam.
Image:

Wrong - The furnace intake and exhaust are too close to each other and are missing rodent screening.

Wrong - The furnace intake and exhaust are too close to each other and are missing rodent screening.
Image:

Wrong - The furnace intake and exhaust are too close to each other and should be facing different directions.

Wrong - The furnace intake and exhaust are too close to each other and should be facing different directions.
Image:

Wrong - The ground of the crawlspace should be covered with a vapor barrier that extends up the sides of the crawlspace.

Wrong - The ground of the crawlspace should be covered with a vapor barrier that extends up the sides of the crawlspace.
Image:

Wrong - The vapor retarder does not completely cover the pier block and is not sealed to the post; the support strapping pinches the flex duct.

Wrong - The vapor retarder does not completely cover the pier block and is not sealed to the post; the support strapping pinches the flex duct.
Image:

Wrong - Water proofing barrier is not laid flat against foundation wall.

Wrong - Water proofing barrier is not laid flat against foundation wall.
Image:

Wrong – If a wall vapor retarder is needed, as in this cold-climate home, openings in the vapor retarder should be sealed with tape.

Wrong – If a wall vapor retarder is needed, as in this cold-climate home, openings in the vapor retarder should be sealed with tape.
Image:

Wrong – Seams in the furnace-to-AC connection at the air handler are not sealed.

Wrong – Seams in the furnace-to-AC connection at the air handler are not sealed.
Image:

Wrong – Two combustion appliances are sharing a flue which could lead to backdrafting if one appliance is updated to a direct vent appliance and disconnected from shared chimney.

Wrong – Two combustion appliances are sharing a flue which could lead to backdrafting if one appliance is updated to a direct vent appliance and disconnected from shared chimney.