Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 241 - 264 of 530 results:

Image:

Permanent options for keeping sun off windows to minimize solar heat gain include permanent overhangs and awnings, frames, and louvers.

Permanent options for keeping sun off windows to minimize solar heat gain include permanent overhangs and awnings, frames, and louvers.
Presentation:

Planning for Results - Best Practices That You Can Apply to Your Business

Image:

Primary wood framing systems: walls, roof diaphragm, and floor diaphragm

Primary wood framing systems: walls, roof diaphragm, and floor diaphragm
Video:

Protect Your Home from Flood Damage

Image:

Raised ceiling duct chase installation technique

Raised ceiling duct chase installation technique
Image:

Rebar type and placement to reinforce masonry walls.

Rebar type and placement to reinforce masonry walls.
Image:

Recommended hip roof framing

Recommended hip roof framing
Image:

Reduce thermal bridging in hot climate zones by using an intersecting exterior wall framing technique as shown here.

Reduce thermal bridging in hot climate zones by using an intersecting exterior wall framing technique as shown here.
Video:

Resilient Seismic Design in Multi-Story Wood Buildings

Image:

RESNET Grade I installation of spray foam insulation

RESNET Grade I installation of spray foam insulation
Image:

Right - A continuous load path connects the roof and wall framing to the foundation.

Right - A continuous load path connects the roof and wall framing to the foundation.
Image:

Right - A floor-to-floor hold down can be installed as a retrofit without removing the siding.

Right - A floor-to-floor hold down can be installed as a retrofit without removing the siding.
Image:

Right - Batt was properly split around wires to achieve RESNET Grade I

Right - Batt was properly split around wires to achieve RESNET Grade I
Image:

Right - Blocking has been installed between the ceiling joists and air sealed in place with canned spray foam to stop air flow beneath the attic knee wall.

Right - Blocking has been installed between the ceiling joists and air sealed in place with canned spray foam to stop air flow beneath the attic knee wall.
Image:

Right - Closed-cell spray foam insulation fills the wall cavities of the exterior walls in this home retrofit

Right - Closed-cell spray foam insulation fills the wall cavities of the exterior walls in this home retrofit
Image:

Right - Correct angle for installing an engineered structural screw to secure a rafter to a wall for hurricane resistance.

Right - Correct angle for installing an engineered structural screw to secure a rafter to a wall for hurricane resistance.
Image:

Right - Double-stud wall are boxed with plywood around windows and doors

Right - Double-stud wall are boxed with plywood around windows and doors
Image:

Right - Engineered portal frames are used for wall bracing to resist wind and earthquake loads.

Right - Engineered portal frames are used for wall bracing to resist wind and earthquake loads.
Image:

Right - Engineered structural screws are installed to secure a stud to a top and bottom plate for increased hurricane or seismic resistance.

Right - Engineered structural screws are installed to secure a stud to a top and bottom plate for increased hurricane or seismic resistance.
Image:

Right - every rafter is secured to the wall framing with metal ties.

Right - every rafter is secured to the wall framing with metal ties.
Image:

Right - Gasket installed at marriage wall connection prior to assembling modules

Right - Gasket installed at marriage wall connection prior to assembling modules
Image:

Right - Installation steps for the L-bent strap method of bracing a gable end wall

Right - Installation steps for the L-bent strap method of bracing a gable end wall
Image:

Right - Lookout or outrigger framing for a gable overhang provides two points at each outrigger to add metal connectors to strengthen the overhang against wind uplift.

Right - Lookout or outrigger framing for a gable overhang provides two points at each outrigger to add metal connectors to strengthen the overhang against wind uplift.
Image:

Right - Metal connectors provide uplift resistance at the rim joist between floors in new construction for a continuous load path.

Right - Metal connectors provide uplift resistance at the rim joist between floors in new construction for a continuous load path.