Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 481 - 504 of 515 results:

Image:

Wrong - Sub-floor nails are missing the floor joist.

Wrong - Sub-floor nails are missing the floor joist.
Image:

Wrong - The studs added for support were cut at an angle providing weak support where the stud meets the compression block.

Wrong - The studs added for support were cut at an angle providing weak support where the stud meets the compression block.
Image:

Wrong - The wall stud should not be cut to fit around foundation anchor bolt; the stud should be repositioned.

Wrong - The wall stud should not be cut to fit around foundation anchor bolt; the stud should be repositioned.
Image:

Wrong - The wall studs are too short and do not securely attach to the top plate.

Wrong - The wall studs are too short and do not securely attach to the top plate.
Image:

Wrong - These screws missed the studs.

Wrong - These screws missed the studs.
Image:

Wrong - This roof failed in high winds due to lack of metal attachments to the framing.

Wrong - This roof failed in high winds due to lack of metal attachments to the framing.
Image:

Wrong - Toe nails in roof truss are set too low in framing bracket and hurricane strap is set too high so lower nails don't hit lower 2x6 of top plate.

Wrong - Toe nails in roof truss are set too low in framing bracket and hurricane strap is set too high so lower nails don't hit lower 2x6 of top plate.
Image:

Wrong - Trusses should be inspected for damage before installation.

Wrong - Trusses should be inspected for damage before installation.
Image:

Wrong - Vertical support members are not alligned.

Wrong - Vertical support members are not alligned.
Image:

Wrong - Wall studs were poorly positioned; should not be cut to fit over a foundation anchor bolt.

Wrong - Wall studs were poorly positioned; should not be cut to fit over a foundation anchor bolt.
Image:

Wrong – Conventional T-post detail is extremely difficult to insulate and usually doesn't happen

Wrong – Conventional T-post detail is extremely difficult to insulate and usually doesn't happen
Image:

Wrong – Don’t cut more out of framing than needed for plumbing pipes.

Wrong – Don’t cut more out of framing than needed for plumbing pipes.
Image:

Wrong – Excessive and structurally unnecessary framing at door

Wrong – Excessive and structurally unnecessary framing at door
Image:

Wrong – Excessive framing and improper spacing of studs

Wrong – Excessive framing and improper spacing of studs
Image:

Wrong – Excessive framing will not allow corner to be insulated

Wrong – Excessive framing will not allow corner to be insulated
Image:

Wrong – Framing does not allow corner to be insulated

Wrong – Framing does not allow corner to be insulated
Image:

Wrong – Framing does not allow corner to be insulated

Wrong – Framing does not allow corner to be insulated
Image:

Wrong – Framing does not allow corner to be insulated

Wrong – Framing does not allow corner to be insulated
Image:

Wrong – Insulation does not fill entire cavity nor is there an air barrier present between the double wall

Wrong – Insulation does not fill entire cavity nor is there an air barrier present between the double wall
Image:

Wrong – No air barrier installed between double wall framing

Wrong – No air barrier installed between double wall framing
Image:

Wrong – No air barrier installed between the walls and a larger gap between the walls that needs sealing

Wrong – No air barrier installed between the walls and a larger gap between the walls that needs sealing
Image:

Wrong – The damaged rim joist was not replaced and its strength is compromised in a critical load-bearing corner.

Wrong – The damaged rim joist was not replaced and its strength is compromised in a critical load-bearing corner.
Image:

Wrong – The gable end wall failed because the rigid foam sheathing was not backed up by plywood or OSB.

Wrong – The gable end wall failed because the rigid foam sheathing was not backed up by plywood or OSB.
Image:

Wrong – The roof sheathing was inadequately fastened and gave way causing the gable end wall to fail

Wrong – The roof sheathing was inadequately fastened and gave way causing the gable end wall to fail