Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 145 - 168 of 873 results:

Image:

Advanced framing techniques include constructing on a 2-foot grid where wall studs are placed 24 inches on center and aligned with roof and floor trusses for a continuous load path from roof to foundation.

Advanced framing techniques include constructing on a 2-foot grid where wall studs are placed 24 inches on center and aligned with roof and floor trusses for a continuous load path from roof to foundation.
Video:

After the Storm: Building for High Wind Resistance

Presentation:

Air Sealing - The Foundation of High Performance Homes

Image:

Air speeds generated by a typical ceiling fan are in the ideal range for providing occupant cooling without causing disruption

Air speeds generated by a typical ceiling fan are in the ideal range for providing occupant cooling without causing disruption
Image:

Airflow can be directed across thermal mass in the ceiling, floor, or elsewhere inside the home through various window and louver configurations

Airflow can be directed across thermal mass in the ceiling, floor, or elsewhere inside the home through various window and louver configurations
Image:

All populated regions in the United States can experience an extreme heat event, whether northern or southern, humid or dry, or urban or rural

All populated regions in the United States can experience an extreme heat event, whether northern or southern, humid or dry, or urban or rural
Image:

An anchor side plate is used to connect the concrete foundation to the sill plate from the exterior as part of a seismic retrofit when the sill plate is not accessible from the interior of the home

An anchor side plate is used to connect the concrete foundation to the sill plate from the exterior as part of a seismic retrofit when the sill plate is not accessible from the interior of the home
Image:

An exhaust fan pulls damp air out of a retrofitted sealed crawlspace while drawing in dry air from the living space

An exhaust fan pulls damp air out of a retrofitted sealed crawlspace while drawing in dry air from the living space
Image:

An externally insulated slab-on-grade is pest-protected by a metal termite shield under sill plate, metal-flashing-wrapped foam under siding, a removable inspection strip of PVC-covered foam, and 2 feet of gravel next to the foundation.

An externally insulated slab-on-grade is pest-protected by a metal termite shield under sill plate, metal-flashing-wrapped foam under siding, a removable inspection strip of PVC-covered foam, and 2 feet of gravel next to the foundation.
Image:

An innovative U-shaped heat pump offers SEER 15 efficiency and operation with smart phones

An innovative U-shaped heat pump offers SEER 15 efficiency and operation with smart phones
Presentation:

An Introduction to ASHRAE Guideline 44

An Introduction to ASHRAE Guideline 44
Image:

An NFRC glazing system energy performance label will report U-factor, solar heat gain coefficient, visible transmittance, and air leakage; if the window is ENERGY certified, the ENERGY STAR label will be located next to the NFRC label

An NFRC glazing system energy performance label will report U-factor, solar heat gain coefficient, visible transmittance, and air leakage; if the window is ENERGY certified, the ENERGY STAR label will be located next to the NFRC label
Image:

An ultra-efficient layer of R-20 rigid foam foundation insulation covers the ground underneath the vapor barrier and radiant floor loops, which will circulate water heated by an ultra-efficient geo heat pump.

An ultra-efficient layer of R-20 rigid foam foundation insulation covers the ground underneath the vapor barrier and radiant floor loops, which will circulate water heated by an ultra-efficient geo heat pump.
Image:

An uninsulated (or existing insulated) basement slab is retrofitted to reduce moisture transmission by sealing with epoxy paint.

An uninsulated (or existing insulated) basement slab is retrofitted to reduce moisture transmission by sealing with epoxy paint.
Image:

Anchor bolts should be at least 1/2-inch diameter and should be embedded at least 7 inches into the foundation, spaced not more than 6 feet apart, and between 3.5 and 12 inches from each end of the sill plates.

Anchor bolts should be at least 1/2-inch diameter and should be embedded at least 7 inches into the foundation, spaced not more than 6 feet apart, and between 3.5 and 12 inches from each end of the sill plates.
Image:

Annual average temperatures have increased across North America when comparing the present day to the first half of the last century, and are projected to increase for mid-century and end-of-century relative to the near-present

Annual average temperatures have increased across North America when comparing the present day to the first half of the last century, and are projected to increase for mid-century and end-of-century relative to the near-present
Image:

Any holes through the vapor barrier installed over the basement floor slab are thoroughly sealed as part of the foundation water barrier system.

Any holes through the vapor barrier installed over the basement floor slab are thoroughly sealed as part of the foundation water barrier system.
Image:

Architectural shading can include large eaves, a porch roof, a well-designed pergola, or other building elements

Architectural shading can include large eaves, a porch roof, a well-designed pergola, or other building elements
Presentation:

ASES March Webinar: Uncoupling Solar Light and Heat in Passive Solar Design

Image:

Assembly can be used in IECC CZ 3 and above to thermally isolate garages in multifamily row houses with slab foundations. For unheated garages, it is unnecessary to insulate wall between garage and exterior of slab or slab underneath garage.

Assembly can be used in IECC CZ 3 and above to thermally isolate garages in multifamily row houses with slab foundations. For unheated garages, it is unnecessary to insulate wall between garage and exterior of the slab or the slab underneath the garage.
Video:

Assembly Sequence for Concrete Crawl Space Wall with Exterior Insulation

Video:

Assembly Sequence for Concrete Crawl Space with Interior Insulation

Video:

Assembly Sequence for Concrete Wall with Exterior Insulation

Video:

Assembly Sequence for Concrete Wall with Interior Foam Spray Insulation