Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 721 - 744 of 775 results:

Video:

Wood Tornado Shelters Segment 6

Image:

Wrong - An unbraced water heater in this home fell during an earthquake; the resulting fire destroyed the home.

Wrong - An unbraced water heater in this home fell during an earthquake; the resulting fire destroyed the home.
Image:

Wrong - Class I vapor retarder over framed basement walls can cause condensation, mold, and rotting because plastic prevents drying to the inside; the outside should have waterproofing and vertical drainage, and the framing should be spaced from the wall.

Wrong - Class I vapor retarder over framed basement walls can cause condensation, mold, and rotting because plastic prevents drying to the inside; the outside should have waterproofing and vertical drainage, and the framing should be spaced from the wall.
Image:

Wrong - Foundation wall heights do not align.

Wrong - Foundation wall heights do not align.
Image:

Wrong - Framing a dormer using only toe nailing and end nailing is not acceptable in areas subjected to high winds, hurricanes, or earthquakes.

Wrong - Framing a dormer using only toe nailing and end nailing is not acceptable in areas subjected to high winds, hurricanes, or earthquakes.
Image:

Wrong - In floodplains, the interior grade elevation should be equal to or higher than the exterior grade as shown on right.

Wrong - In floodplains, the interior grade elevation should be equal to or higher than the exterior grade as shown on right.
Image:

Wrong - Joint in support beam is inadequately connected and supported.

Wrong - Joint in support beam is inadequately connected and supported.
Image:

Wrong - Moisture from within the basement foundation wall can migrate into the insulation cavity in a conventional blanket insulation installation.

Wrong - Moisture from within the basement foundation wall can migrate into the insulation cavity in a conventional blanket insulation installation.
Image:

Wrong - Polyethylene sheeting should be lapped up sides of walls and pillars and taped

Wrong - Polyethylene sheeting should be lapped up sides of walls and pillars and taped
Image:

Wrong - The basement blanket insulation is loosely attached to the interior of the basement wall, does not cover the entire wall, is not sealed at the edges, and is not installed over rigid foam that covers the entire surface of the foundation walls.

Wrong - The basement blanket insulation is loosely attached to the interior of the basement wall, does not cover the entire wall, is not sealed at the edges, and is not installed over rigid foam that covers the entire surface of the foundation walls.
Image:

Wrong - The below-grade concrete does not have the correct construction to be impermeable to moisture because the lumber is untreated and against the concrete that lacks waterproofing.

Wrong - The below-grade concrete does not have the correct construction to be impermeable to moisture because the lumber is untreated and against the concrete that lacks waterproofing.
Image:

Wrong - The pile foundation of this home nearly collapsed from coastal storm surges because the piles were not embedded deeply enough in the ground.

Wrong - The pile foundation of this home nearly collapsed from coastal storm surges because the piles were not embedded deeply enough in the ground.
Image:

Wrong - The upper edge of the below-grade dimpled plastic rain mat is pulling away from the wall and is no longer tucked under the protective metal flashing so rain water can get behind the plastic mat and wet the foundation wall.

Wrong - The upper edge of the below-grade dimpled plastic rain mat is pulling away from the wall and is no longer tucked under the protective metal flashing so rain water can get behind the plastic mat and wet the foundation wall.
Image:

Wrong - The wall stud should not be cut to fit around foundation anchor bolt; the stud should be repositioned.

Wrong - The wall stud should not be cut to fit around foundation anchor bolt; the stud should be repositioned.
Image:

Wrong - This surface downspout run-out is directed toward the foundation instead of away from it.

Wrong - This surface downspout run-out is directed toward the foundation instead of away from it.
Image:

Wrong - Wall studs were poorly positioned; should not be cut to fit over a foundation anchor bolt.

Wrong - Wall studs were poorly positioned; should not be cut to fit over a foundation anchor bolt.
Image:

Wrong – A closable air vent should not be used as a flood vent

Wrong – A closable air vent should not be used as a flood vent
Image:

Wrong – A poorly sealed window and window well allow bulk water to enter the crawlspace from ground that slopes toward the structure

Wrong – A poorly sealed window and window well allow bulk water to enter the crawlspace from ground that slopes toward the structure
Image:

Wrong – Drain pipe has been cut and foundation penetration has not been properly sealed

Wrong – Drain pipe has been cut and foundation penetration has not been properly sealed
Image:

Wrong – Driveway is not sloped away from the house

Wrong – Driveway is not sloped away from the house
Image:

Wrong – No polyethylene sheeting vapor barrier is installed on the crawlspace floor

Wrong – No polyethylene sheeting vapor barrier is installed on the crawlspace floor
Image:

Wrong – Piers set on individual footings with inadequate anchoring to the ground were twisted and toppled by a coastal storm surge, while those anchored in the concrete pad stayed upright.

Wrong – Piers set on individual footings with inadequate anchoring to the ground were twisted and toppled by a coastal storm surge, while those anchored in the concrete pad stayed upright.
Image:

Wrong – Polyethylene sheeting does not completely cover the aggregate and the footing

Wrong – Polyethylene sheeting does not completely cover the aggregate and the footing
Image:

Wrong – Polyethylene sheeting does not extend beyond edge of aggregate to separate the footer from the stem wall which will be poured next

Wrong – Polyethylene sheeting does not extend beyond edge of aggregate to separate the footer from the stem wall which will be poured next