Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 193 - 216 of 289 results:

Image:

The rough openings for the windows are flashed with a paint-on flashing product then the windows are installed and additional flashing tape is installed over the flashing. Nail holes are sealed with caulk.

The rough openings for the windows are flashed with a paint-on flashing product then the windows are installed and additional flashing tape is installed over the flashing. Nail holes are sealed with caulk.
Image:

The sheathing has rotted because there was not a sufficient drainage gap behind the stucco cladding

The sheathing has rotted because there was not a sufficient drainage gap behind the stucco cladding
Image:

The tape window flashing here is integrated with the roller-applied weather-resistant barrier.

The tape window flashing here is integrated with the roller-applied weather-resistant barrier.
Image:

The water-resistant barrier, weep screed, and stucco lathe are not properly layered

The water-resistant barrier, weep screed, and stucco lathe are not properly layered
Image:

The water-resistant barrier, weep screed, and stucco lathe are properly layered and will create a complete drainage system

The water-resistant barrier, weep screed, and stucco lathe are properly layered and will create a complete drainage system
Image:

The weep holes are properly cleaned out and the weeps properly installed

The weep holes are properly cleaned out and the weeps properly installed
Image:

The weep holes are spaced at the correct distance to provide a complete drainage system

The weep holes are spaced at the correct distance to provide a complete drainage system
Image:

The weep holes are spaced too far apart

The weep holes are spaced too far apart
Image:

The weep holes were not properly cleaned before the weeps were installed

The weep holes were not properly cleaned before the weeps were installed
Image:

The windows in this building are connected to the fully adhered water and air control layer using fluid-applied flashing

The windows in this building are connected to the fully adhered water and air control layer using fluid-applied flashing
Image:

There are no weep holes installed at the bottom of the exterior wall

There are no weep holes installed at the bottom of the exterior wall
Image:

There is a water-resistant barrier installed underneath the stucco and lathe

There is a water-resistant barrier installed underneath the stucco and lathe
Image:

There is a weep screed installed at the bottom of the wall

There is a weep screed installed at the bottom of the wall
Image:

There is not a weep screed installed at the bottom of the stucco wall

There is not a weep screed installed at the bottom of the stucco wall
Image:

These wildfire-resistant decks have a solid decking surface, metal railings, and the underside timber supports are covered with flame-resistant fiber cement board; also the decking is set back from the vegetated slope.

These wildfire-resistant decks have a solid decking surface, metal railings, and the underside timber supports are covered with flame-resistant fiber cement board; also the decking is set back from the vegetated slope.
Image:

This basement is insulated on the exterior with rigid foam over dampproofing, with granular backfill and footing drains to facilitate drainage away from the foundation, a termite shield to protect from pests, and cellular PVC to protect the rigid foam.

This basement is insulated on the exterior with rigid foam over dampproofing, with granular backfill and footing drains to facilitate drainage away from the foundation, a termite shield to protect from pests, and cellular PVC to protect the rigid foam.
Image:

This drawing shows key head details for a window installation using a fluid-applied flashing on a wall with a fluid-applied water and air control layer

This drawing shows key head details for a window installation using a fluid-applied flashing on a wall with a fluid-applied water and air control layer
Image:

This drawing shows key head details for a window installation using a fluid-applied flashing on a wall with a mechanically attached water and air control layer

This drawing shows key head details for a window installation using a fluid-applied flashing on a wall with a mechanically attached water and air control layer
Image:

This drawing shows key head details for a window installation using a fluid-applied flashing on a wall with a mechanically attached water and air control layer and continuous insulation

This drawing shows key head details for a window installation using a fluid-applied flashing on a wall with a mechanically attached water and air control layer and continuous insulation
Image:

This drawing shows key head details for a window installation using a self-adhered membrane tape flashing on a wall with a mechanically attached water and air control layer

This drawing shows key head details for a window installation using a self-adhered membrane tape flashing on a wall with a mechanically attached water and air control layer
Image:

This drawing shows key head details for an “outie” window installation using a fluid-applied flashing on a wall with a fluid-applied water and air control layer and continuous insulation

This drawing shows key head details for an “outie” window installation using a fluid-applied flashing on a wall with a fluid-applied water and air control layer and continuous insulation
Image:

This drawing shows key jamb details for a window installation using a fluid-applied flashing on a wall with a fluid-applied water and air control layer

This drawing shows key jamb details for a window installation using a fluid-applied flashing on a wall with a fluid-applied water and air control layer
Image:

This drawing shows key jamb details for a window installation using a fluid-applied flashing on a wall with a mechanically attached water and air control layer

This drawing shows key jamb details for a window installation using a fluid-applied flashing on a wall with a mechanically attached water and air control layer
Image:

This drawing shows key jamb details for a window installation using a fluid-applied flashing on a wall with a mechanically attached water and air control layer and continuous insulation

This drawing shows key jamb details for a window installation using a fluid-applied flashing on a wall with a mechanically attached water and air control layer and continuous insulation