Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 145 - 168 of 326 results:

Image:

Right - The house wrap is properly flashed and taped, and all penetrations are properly flashed.

Right - The house wrap is properly flashed and taped, and all penetrations are properly flashed.
Image:

Right - The pipe penetration is properly flashed and furring strips are installed on each side in preparation for installing cladding

Right - The pipe penetration is properly flashed and furring strips are installed on each side in preparation for installing cladding
Image:

Right - The vent hood is flashed

Right - The vent hood is flashed
Image:

Right - The water and air control layers are properly integrated around the hose bib

Right - The water and air control layers are properly integrated around the hose bib
Image:

Right - This duct penetration is properly flashed and integrated with the taped, foil-faced foam sheathing layer, which serves as the air and water barrier

Right - This duct penetration is properly flashed and integrated with the taped, foil-faced foam sheathing layer, which serves as the air and water barrier
Image:

Right - Wiring penetration through exterior wall is flashed with tape.

Right - Wiring penetration through exterior wall is flashed with tape.
Image:

Right – A chimney cricket is installed and flashed to direct rainwater around the chimney.

Right – A chimney cricket is installed and flashed to direct rainwater around the chimney.
Image:

Right – A flexible flashing product is installed around the corners of the window sill before installing the windows.

Right – A flexible flashing product is installed around the corners of the window sill before installing the windows.
Image:

Right – A metal flashing was installed behind the first row of siding above the windows to guide water over the trim.

Right – A metal flashing was installed behind the first row of siding above the windows to guide water over the trim.
Image:

Right – A paint-on flashing was applied to the window frames of this ICF house before installing the windows.

Right – A paint-on flashing was applied to the window frames of this ICF house before installing the windows.
Image:

Right – All penetrations through the roof decking are sealed with paint-on flashing.

Right – All penetrations through the roof decking are sealed with paint-on flashing.
Image:

Right – Deck flashing protects the deck-to-wall connection from water and burning embers.

Right – Deck flashing protects the deck-to-wall connection from water and burning embers.
Image:

Right – Flashing is installed around chimney, skylight, vents, dormers, in valleys and at eaves

Right – Flashing is installed around chimney, skylight, vents, dormers, in valleys and at eaves
Image:

Right – Integrate pipe flashing with roof shingles

Right – Integrate pipe flashing with roof shingles
Image:

Right – Metal flashing is installed between the deck boards and house wall with the top of the flashing extending up behind the siding and the bottom of the flashing extending out and down over the ledger board

Right – Metal flashing is installed between the deck boards and house wall with the top of the flashing extending up behind the siding and the bottom of the flashing extending out and down over the ledger board
Image:

Right – Side flashing extends over the pan flashing

Right – Side flashing extends over the pan flashing
Image:

Right – The base of the wall is water proofed and the seam between the base of the wall and the sidewalk is air sealed.

Right – The base of the wall is water proofed and the seam between the base of the wall and the sidewalk is air sealed.
Image:

Right – The flashing is properly installed to create a complete drainage system with continuous rigid insulation sheathing/siding

Right – The flashing is properly installed to create a complete drainage system with continuous rigid insulation sheathing/siding
Image:

Right – The framing around the window is thoroughly flashed with liquid flashing.

Right – The framing around the window is thoroughly flashed with liquid flashing.
Image:

Right – The hard metal ducts are located in conditioned space between floor joists and all seams are sealed with approved metal tape.

Right – The hard metal ducts are located in conditioned space between floor joists and all seams are sealed with approved metal tape.
Image:

Right – The sheathing and window sills are sealed with a paint-on flashing.

Right – The sheathing and window sills are sealed with a paint-on flashing.
Image:

Right – The step flashing is the correct height above the roof deck

Right – The step flashing is the correct height above the roof deck
Image:

Right – The water-resistant barrier is layered over the step flashing to provide a complete drainage system

Right – The water-resistant barrier is layered over the step flashing to provide a complete drainage system
Image:

Right – There is flashing installed along the top of the window and the water-resistant barrier is layered over to create a complete drainage system

Right – There is flashing installed along the top of the window and the water-resistant barrier is layered over to create a complete drainage system