Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 793 - 816 of 859 results:

Image:

Wrong - The gutter is missing kick-out flashing causing wall and window damage beneath it.

Wrong - The gutter is missing kick-out flashing causing wall and window damage beneath it.
Image:

Wrong - The pile foundation of this home nearly collapsed from coastal storm surges because the piles were not embedded deeply enough in the ground.

Wrong - The pile foundation of this home nearly collapsed from coastal storm surges because the piles were not embedded deeply enough in the ground.
Image:

Wrong - The siding on the chimney is rotten because there is no metal step flashing at the base of the chimney.

Wrong - The siding on the chimney is rotten because there is no metal step flashing at the base of the chimney.
Image:

Wrong - The sill flashing is not completely adhered to the window.

Wrong - The sill flashing is not completely adhered to the window.
Image:

Wrong - The sliding door is missing pan flashing.

Wrong - The sliding door is missing pan flashing.
Image:

Wrong - The window lying on the ground was protected by a shutter but the shutter was attached to the window frame, rather than directly to the wall framing.

Wrong - The window lying on the ground was protected by a shutter but the shutter was attached to the window frame, rather than directly to the wall framing.
Image:

Wrong - The window needs pan, head, and jamb flashing.

Wrong - The window needs pan, head, and jamb flashing.
Image:

Wrong - There is no step flashing along the base of the gable and the right window is missing sill trim.

Wrong - There is no step flashing along the base of the gable and the right window is missing sill trim.
Image:

Wrong - This concrete roof was not adequately attached and reinforced and failed in high winds.

Wrong - This concrete roof was not adequately attached and reinforced and failed in high winds.
Image:

Wrong - This roof failed in high winds due to lack of metal attachments to the framing.

Wrong - This roof failed in high winds due to lack of metal attachments to the framing.
Image:

Wrong - This tile roof was damaged by high winds.

Wrong - This tile roof was damaged by high winds.
Image:

Wrong - Through-wall flashing has not been installed at brick wall intervals and house wrap is missing.

Wrong - Through-wall flashing has not been installed at brick wall intervals and house wrap is missing.
Image:

Wrong - Utility trim was substituted for the starter strip and the bottom lock was cut off this vinyl siding so the siding pulled loose under wind pressure.

Wrong - Utility trim was substituted for the starter strip and the bottom lock was cut off this vinyl siding so the siding pulled loose under wind pressure.
Image:

Wrong - Vent hole has no cover or screening and is poorly sealed and flashed to siding.

Wrong - Vent hole has no cover or screening and is poorly sealed and flashed to siding.
Image:

Wrong - Vent hole has no cover or screening and is poorly sealed and flashed to siding.

Wrong - Vent hole has no cover or screening and is poorly sealed and flashed to siding.
Image:

Wrong - Water has gotten behind the paint, possibly due to lack of window flashing, leading to blistering.

Wrong - Water has gotten behind the paint, possibly due to lack of window flashing, leading to blistering.
Image:

Wrong - Window is missing pan flashing under sill and tape flashing at jamb end sill.

Wrong - Window is missing pan flashing under sill and tape flashing at jamb end sill.
Image:

Wrong - Wiring holes are not sealed and possible missing flashing around windows is allowing water into walls and causing paint to peel.

Wrong - Wiring holes are not sealed and possible missing flashing around windows is allowing water into walls and causing paint to peel.
Image:

Wrong – Drain pipe has been cut and foundation penetration has not been properly sealed

Wrong – Drain pipe has been cut and foundation penetration has not been properly sealed
Image:

Wrong – Driveway is not sloped away from the house

Wrong – Driveway is not sloped away from the house
Image:

Wrong – For proper detailing of vinyl around windows and other obstacles, use utility trim, punch snaplocks into siding, and do not overlap directly beneath a window.

Wrong – For proper detailing of vinyl around windows and other obstacles, use utility trim, punch snaplocks into siding, and do not overlap directly beneath a window.
Image:

Wrong – Garage door failure due to positive pressures from hurricane force winds.

Wrong – Garage door failure due to positive pressures from hurricane force winds.
Image:

Wrong – If roof membrane is not fully adhered, it can flutter and fail due to negative pressure from wind above and positive pressure from air leakage through roof deck below

Wrong – If roof membrane is not fully adhered, it can flutter and fail due to negative pressure from wind above and positive pressure from air leakage through roof deck below
Image:

Wrong – Incorrect location of fasteners in an roof asphalt shingle

Wrong – Incorrect location of fasteners in an roof asphalt shingle