Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 937 - 960 of 994 results:

Image:

Wrong - Seams at duct elbow are not fully sealed with mastic.

Wrong - Seams at duct elbow are not fully sealed with mastic.
Image:

Wrong - Seams in metal ducting are not sealed.

Wrong - Seams in metal ducting are not sealed.
Image:

Wrong - Step flashing is missing where the gable meets roof and the valley flashing is incorrectly on top of rather than under shingles.

Wrong - Step flashing is missing where the gable meets roof and the valley flashing is incorrectly on top of rather than under shingles.
Image:

Wrong - Stucco has rotted and cracked above a window because of water damage due to lack of proper flashing and drainage.

Wrong - Stucco has rotted and cracked above a window because of water damage due to lack of proper flashing and drainage.
Image:

Wrong - Tape flashing around the window is poorly installed.

Wrong - Tape flashing around the window is poorly installed.
Image:

Wrong - Tape flashing is missing around window frame.

Wrong - Tape flashing is missing around window frame.
Image:

Wrong - Terminate exhaust fan ducts outdoors, not "near" the outdoors

Wrong - Terminate exhaust fan ducts outdoors, not "near" the outdoors
Image:

Wrong - the CFM rating may not meet the performance specification once installed, and the sone rating is too high.

Wrong - the CFM rating may not meet the performance specification once installed, and the sone rating is too high.
Image:

Wrong - The flashing tape is poorly adhered to the window.

Wrong - The flashing tape is poorly adhered to the window.
Image:

Wrong - The gutter is missing kick-out flashing causing wall and window damage beneath it.

Wrong - The gutter is missing kick-out flashing causing wall and window damage beneath it.
Image:

Wrong - The holes around the HRV ducting should be air sealed.

Wrong - The holes around the HRV ducting should be air sealed.
Image:

Wrong - The seam around the duct boot where the duct boot enters the trunk duct has not been completely sealed with mesh tape and mastic.

Wrong - The seam around the duct boot where the duct boot enters the trunk duct has not been completely sealed with mesh tape and mastic.
Image:

Wrong - The siding on the chimney is rotten because there is no metal step flashing at the base of the chimney.

Wrong - The siding on the chimney is rotten because there is no metal step flashing at the base of the chimney.
Image:

Wrong - The sill flashing is not completely adhered to the window.

Wrong - The sill flashing is not completely adhered to the window.
Image:

Wrong - The sliding door is missing pan flashing.

Wrong - The sliding door is missing pan flashing.
Image:

Wrong - The support strap for the duct is too tight and the radius of the turn is too sharp.

Wrong - The support strap for the duct is too tight and the radius of the turn is too sharp.
Image:

Wrong - The window needs pan, head, and jamb flashing.

Wrong - The window needs pan, head, and jamb flashing.
Image:

Wrong - There is no step flashing along the base of the gable and the right window is missing sill trim.

Wrong - There is no step flashing along the base of the gable and the right window is missing sill trim.
Image:

Wrong - This flex duct is so twisted air flow is greatly restricted

Wrong - This flex duct is so twisted air flow is greatly restricted
Image:

Wrong - This tape product is not code approved for duct sealing.

Wrong - This tape product is not code approved for duct sealing.
Image:

Wrong - Through-wall flashing has not been installed at brick wall intervals and house wrap is missing.

Wrong - Through-wall flashing has not been installed at brick wall intervals and house wrap is missing.
Image:

Wrong - Two exhaust terminations are joined in a roughly cut, restrictive hole that is not air sealed.

Wrong - Two exhaust terminations are joined in a roughly cut, restrictive hole that is not air sealed.
Image:

Wrong - Vent hole has no cover or screening and is poorly sealed and flashed to siding.

Wrong - Vent hole has no cover or screening and is poorly sealed and flashed to siding.
Image:

Wrong - Vent hole has no cover or screening and is poorly sealed and flashed to siding.

Wrong - Vent hole has no cover or screening and is poorly sealed and flashed to siding.