Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 817 - 840 of 903 results:

Image:

Wrong - Flashing tape is missing behind the right edge of the brick wall.

Wrong - Flashing tape is missing behind the right edge of the brick wall.
Image:

Wrong - Flue pipe was poorly flashed at roof.

Wrong - Flue pipe was poorly flashed at roof.
Image:

Wrong - Foundation wall heights do not align.

Wrong - Foundation wall heights do not align.
Image:

Wrong - House wrap and flashing tape are poorly installed allowing water to get into the gaps behind flashing tape.

Wrong - House wrap and flashing tape are poorly installed allowing water to get into the gaps behind flashing tape.
Image:

Wrong - House wrap tape is not fully adhered at seam and flashing tape is missing from window head, jamb, and corner above window.

Wrong - House wrap tape is not fully adhered at seam and flashing tape is missing from window head, jamb, and corner above window.
Image:

Wrong - House wrap was not properly cut and adhered where the roof meets the wall so water is likely to get behind the house wrap.

Wrong - House wrap was not properly cut and adhered where the roof meets the wall so water is likely to get behind the house wrap.
Image:

Wrong - House wrap was poorly cut at wall interface and not taped leaving wood exposed and vulnerable to water entry.

Wrong - House wrap was poorly cut at wall interface and not taped leaving wood exposed and vulnerable to water entry.
Image:

Wrong - In floodplains, the interior grade elevation should be equal to or higher than the exterior grade as shown on right.

Wrong - In floodplains, the interior grade elevation should be equal to or higher than the exterior grade as shown on right.
Image:

Wrong - Joint in support beam is inadequately connected and supported.

Wrong - Joint in support beam is inadequately connected and supported.
Image:

Wrong - Metal flashing is bent and poorly installed and tape flashing is missing.

Wrong - Metal flashing is bent and poorly installed and tape flashing is missing.
Image:

Wrong - Metal flashing should be used at wall-to-roof junctions.

Wrong - Metal flashing should be used at wall-to-roof junctions.
Image:

Wrong - Missing kick-out flashing to divert rainwater runoff away from the house and into the gutter where the roof meets the wall has caused discoloration of the stucco and water damage behind the stucco by the front porch and the second-story window.

Wrong - Missing kick-out flashing to divert rainwater runoff away from the house and into the gutter where the roof meets the wall has caused discoloration of the stucco and water damage behind the stucco by the front porch and the second-story window.
Image:

Wrong - Missing kick-out flashing to divert rainwater runoff into the gutter where the roof meets the wall has caused discoloration and water damage behind the stucco next to this second-story window.

Wrong - Missing kick-out flashing to divert rainwater runoff into the gutter where the roof meets the wall has caused discoloration and water damage behind the stucco next to this second-story window.
Image:

Wrong - Moisture from within the basement foundation wall can migrate into the insulation cavity in a conventional blanket insulation installation.

Wrong - Moisture from within the basement foundation wall can migrate into the insulation cavity in a conventional blanket insulation installation.
Image:

Wrong - No metal drip edge is visible and asphalt shingles hang down too far.

Wrong - No metal drip edge is visible and asphalt shingles hang down too far.
Image:

Wrong - Pan flashing is poorly adhered on all 4 windows.

Wrong - Pan flashing is poorly adhered on all 4 windows.
Image:

Wrong - Polyethylene sheeting should be lapped up sides of walls and pillars and taped

Wrong - Polyethylene sheeting should be lapped up sides of walls and pillars and taped
Image:

Wrong - Roof is missing metal drip edge to cover the edge of OSB roof decking, roof underlayment should be trimmed back, and asphalt shingles are poorly installed.

Wrong - Roof is missing metal drip edge to cover the edge of OSB roof decking, roof underlayment should be trimmed back, and asphalt shingles are poorly installed.
Image:

Wrong - Roof-wall juncture lacks metal flashing and is poorly designed, thus encouraging water entry.

Wrong - Roof-wall juncture lacks metal flashing and is poorly designed, thus encouraging water entry.
Image:

Wrong - Step flashing is missing where the gable meets roof and the valley flashing is incorrectly on top of rather than under shingles.

Wrong - Step flashing is missing where the gable meets roof and the valley flashing is incorrectly on top of rather than under shingles.
Image:

Wrong - Stucco has rotted and cracked above a window because of water damage due to lack of proper flashing and drainage.

Wrong - Stucco has rotted and cracked above a window because of water damage due to lack of proper flashing and drainage.
Image:

Wrong - Tape flashing around the window is poorly installed.

Wrong - Tape flashing around the window is poorly installed.
Image:

Wrong - Tape flashing is missing around window frame.

Wrong - Tape flashing is missing around window frame.
Image:

Wrong - The basement blanket insulation is loosely attached to the interior of the basement wall, does not cover the entire wall, is not sealed at the edges, and is not installed over rigid foam that covers the entire surface of the foundation walls.

Wrong - The basement blanket insulation is loosely attached to the interior of the basement wall, does not cover the entire wall, is not sealed at the edges, and is not installed over rigid foam that covers the entire surface of the foundation walls.