Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 793 - 816 of 918 results:

Image:

Three locations and methods for installing a roof deck radiant barrier in new construction

Three locations and methods for installing a roof deck radiant barrier in new construction
Image:

Tier 1, Master-slave, load-sensing advanced power strip

Tier 1, Master-slave, load-sensing advanced power strip
Image:

To keep water out, flashing should be integrated with the house wrap, siding, and shingles or roof tiles.

To keep water out, flashing should be integrated with the house wrap, siding, and shingles or roof tiles.
Image:

To minimize air leakage through electrical boxes, the boxes were either wrapped with fire-resistant putty (required at fire-rated walls) or wire penetrations were foamed and the boxes were caulked to the drywall.

To minimize air leakage through electrical boxes, the boxes were either wrapped with fire-resistant putty (required at fire-rated walls) or wire penetrations were foamed and the boxes were caulked to the drywall.
Image:

To reduce the risk of condensation on the interior of the roof sheathing in cold weather, the ratio of exterior (above-deck) insulation must be increased as a percent of total attic insulation as outside temperature decreases

To reduce the risk of condensation on the interior of the roof sheathing in cold weather, the ratio of exterior (above-deck) insulation must be increased as a percent of total attic insulation as outside temperature decreases
Image:

Traditional roof trusses pinch insulation where the roof meets the walls.

Traditional roof trusses pinch insulation where the roof meets the walls.
Image:

Turn on power to the water heater from the circuit breaker.

Turn on power to the water heater from the circuit breaker.
Video:

Turning Off Electricity at the Circuit Box

Image:

Typical Concrete Tile Roofs in Florida

Typical Concrete Tile Roofs in Florida
Image:

Typical roof truss top chord bracing

Typical roof truss top chord bracing
Image:

Underneath the roof sheathing and two exterior layers of rigid foam, the builder stapled netting to the underside of the rafters and filled the roof cavities of the unvented attic with blown-in fiberglass insulation.

Underneath the roof sheathing and two exterior layers of rigid foam, the builder stapled netting to the underside of the rafters and filled the roof cavities of the unvented attic with blown-in fiberglass insulation.
Image:

Unvented roof assembly at eave retrofitted with rigid foam, spray foam, and a fully adhered membrane seal at the top of wall-to-roof transition

Unvented roof assembly at eave retrofitted with rigid foam, spray foam, and a fully adhered membrane seal at the top of wall-to-roof transition
Image:

Unvented roof assembly at eave retrofitted with rigid foam, spray foam, and taped top edge of existing house wrap or building paper

Unvented roof assembly at eave retrofitted with rigid foam, spray foam, and taped top edge of existing house wrap or building paper
Image:

Unvented roof assembly at rake retrofitted with a filler piece and taped top edge of existing house wrap or building paper to seal the top of wall-to-roof transition

Unvented roof assembly at rake retrofitted with a filler piece and taped top edge of existing house wrap or building paper to seal the top of wall-to-roof transition
Image:

Unvented roof assembly at rake retrofitted with spray foam installed along the underside of the roof deck and extended to the rake edge to insulate and air seal the attic

Unvented roof assembly at rake retrofitted with spray foam installed along the underside of the roof deck and extended to the rake edge to insulate and air seal the attic
Image:

Use a non-contact voltage tester to verify the electricity is off, then disconnect the electrical and water connections of the old water heater tank.

Use a non-contact voltage tester to verify the electricity is off, then disconnect the electrical and water connections of the old water heater tank.
Image:

Use the wall switch to turn on the bathroom exhaust fan

Use the wall switch to turn on the bathroom exhaust fan
Image:

Using roof and wall materials with a high Solar Reflectance Index (SRI) will reduce heat gains.

Using roof and wall materials with a high Solar Reflectance Index (SRI) will reduce heat gains.
Image:

Vented Attic vs Unvented Cathedral Attic Air Flow

Vented Attic vs Unvented Cathedral Attic Air Flow
Image:

Vented roof assembly at eave retrofitted with rigid foam, spray foam, and fully adhered membrane to air seal the top of wall-to-roof transition

Vented roof assembly at eave retrofitted with rigid foam, spray foam, and fully adhered membrane to air seal the top of wall-to-roof transition
Image:

Vented roof assembly at rake retrofitted with spray foam and additional insulation installed at the attic floor and extended to the rake edge

Vented roof assembly at rake retrofitted with spray foam and additional insulation installed at the attic floor and extended to the rake edge
Image:

Vinyl and aluminum soffit panels can blow away in high winds if not properly connected.

Vinyl and aluminum soffit panels can blow away in high winds if not properly connected.
Video:

Wall Bracing V: Building Wood Framed Structures for High Wind Resistance

Video:

Wall Bracing: Satisfy the code with strong, resilient, fully sheathed walls