Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 817 - 840 of 970 results:

Image:

This IR camera image shows an HVAC duct in the attic that may have displaced insulation.

This IR camera image shows an HVAC duct in the attic that may have displaced insulation.
Image:

This is the compact outside unit for an ultra-efficient air-to-water heat pump (COP 4.1) that provides space heating and domestic hot water.

This is the compact outside unit for an ultra-efficient air-to-water heat pump (COP 4.1) that provides space heating and domestic hot water.
Image:

This MSHP operates with 120 volts power, has an EER of 18 Btu/Wh, uses about 800 W at full output, and operates remotely with a smart home control system

This MSHP operates with 120 volts power, has an EER of 18 Btu/Wh, uses about 800 W at full output, and operates remotely with a smart home control system
Image:

This multi-split heat pump system incorporates several indoor units connected to just one outdoor unit; the indoor units include a wall-mounted unit, floor-mounted, ceiling cassette, and mini-air handler.

This multi-split heat pump system incorporates several indoor units connected to just one outdoor unit; the indoor units include a wall-mounted unit, floor-mounted, ceiling cassette, and mini-air handler.
Image:

This plot shows a heat pump’s minimum and maximum cooling capacities overlaid with a home’s cooling load line, allowing a designer to assess how well-suited the equipment is for the specific home.

This plot shows a heat pump’s minimum and maximum cooling capacities overlaid with a home’s cooling load line, allowing a designer to assess how well-suited the equipment is for the specific home.
Image:

This plot shows a heat pump’s minimum and maximum heating capacities overlaid with a home’s heating load line as well as the annual heating load hours for the home, allowing a designer to assess how well-suited the equipment is for the specific home.

This plot shows a heat pump’s minimum and maximum heating capacities overlaid with a home’s heating load line as well as the annual heating load hours for the home, allowing a designer to assess how well-suited the equipment is for the specific home.
Image:

This plot shows a heat pump’s minimum and maximum heating capacities overlaid with a home’s heating load line, allowing a designer to assess how well-suited the equipment is for the specific home.

This plot shows a heat pump’s minimum and maximum heating capacities overlaid with a home’s heating load line, allowing a designer to assess how well-suited the equipment is for the specific home.
Image:

This plot shows a heat pump’s minimum and maximum heating capacities overlaid with a home’s heating load line, allowing a designer to assess how well-suited the equipment is for the specific home.

This plot shows a heat pump’s minimum and maximum heating capacities overlaid with a home’s heating load line, allowing a designer to assess how well-suited the equipment is for the specific home.
Image:

This return grille is located in a central hallway in the home and stale air is pulled through this grille and the air filter located behind it to return to the HVAC system for heating or cooling.

This return grille is located in a central hallway in the home and stale air is pulled through this grille and the air filter located behind it to return to the HVAC system for heating or cooling.
Image:

This return inlet has been covered and sealed in preparation for a duct leakage test at rough-in.

This return inlet has been covered and sealed in preparation for a duct leakage test at rough-in.
Image:

This simple awning keeps rain, snow, and leaves from collecting on the HVAC unit; however, the awning should be higher above the heat pump and there should be metal L flashing and a gap separating the wood siding from the roofing material.

This simple awning keeps rain, snow, and leaves from collecting on the HVAC unit; however, the awning should be higher above the heat pump and there should be metal L flashing and a gap separating the wood siding from the roofing material.
Image:

This single-zone mini-split ductless heat pump has only one indoor wall-mounted unit and one outdoor unit.

This single-zone mini-split ductless heat pump has only one indoor wall-mounted unit and one outdoor unit.
Image:

This supply outlet is covered and sealed prior to a duct leakage test at final.

This supply outlet is covered and sealed prior to a duct leakage test at final.
Image:

This traditional centrally ducted heat pump heats and cools the entire home through a network of ducts.

This traditional centrally ducted heat pump heats and cools the entire home through a network of ducts.
Image:

This typical dropped ceiling hallway chase shows a complicated air sealing scheme where chase ceiling drywall meets sidewall top plates

This typical dropped ceiling hallway chase shows a complicated air sealing scheme where chase ceiling drywall meets sidewall top plates
Image:

This upflow air handler for a traditional heat pump has an electric resistance auxiliary heating element located at the top of the unit (circled in red).

This upflow air handler for a traditional heat pump has an electric resistance auxiliary heating element located at the top of the unit (circled in red).
Image:

This utility room houses a high-efficiency gas boiler to provide hot water for the radiant floor heating system and faucets. It also has a central air source heat pump and an energy recovery ventilator.

This utility room houses a high-efficiency gas boiler to provide hot water for the radiant floor heating system and faucets. It also has a central air source heat pump and an energy recovery ventilator.
Image:

This wall-hung ductless indoor mini-split heat pump contains a fan, filter, and heating/cooling coil just like a traditional central air handler for a ducted heat pump system

This wall-hung ductless indoor mini-split heat pump contains a fan, filter, and heating/cooling coil just like a traditional central air handler for a ducted heat pump system
Image:

This wall-mounted evaporative cooler is easy to access for maintenance

This wall-mounted evaporative cooler is easy to access for maintenance
Image:

Tier 1, Master-slave, load-sensing advanced power strip

Tier 1, Master-slave, load-sensing advanced power strip
Image:

To attach the flex duct to a main trunk duct or any other connection, the flex duct is pulled over the connecting collar at least 2 inches past the raised bead, then the insulation is pulled back

To attach the flex duct to a main trunk duct or any other connection, the flex duct is pulled over the connecting collar at least 2 inches past the raised bead, then the insulation is pulled back
Image:

To increase surface area and reduce pressure drop for high MERV filters, the return duct can be constructed to permit the installation of two furnace filters side by side

To increase surface area and reduce pressure drop for high MERV filters, the return duct can be constructed to permit the installation of two furnace filters side by side
Image:

To minimize air leakage through electrical boxes, the boxes were either wrapped with fire-resistant putty (required at fire-rated walls) or wire penetrations were foamed and the boxes were caulked to the drywall.

To minimize air leakage through electrical boxes, the boxes were either wrapped with fire-resistant putty (required at fire-rated walls) or wire penetrations were foamed and the boxes were caulked to the drywall.
Image:

To perform a duct leakage to outside test, the home must be pressurized using a blower door while the duct test is carried out at the same pressure.

To perform a duct leakage to outside test, the home must be pressurized using a blower door while the duct test is carried out at the same pressure.