Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 553 - 576 of 705 results:

Image:

This flex duct is much longer than it needs to be; the extra loops greatly decrease air flow in the duct.

This flex duct is much longer than it needs to be; the extra loops greatly decrease air flow in the duct.
Image:

This foundation/floor/SIP wall detail shows recommended support of SIP wall panel at the sill plate

This foundation/floor/SIP wall detail shows recommended support of SIP wall panel at the sill plate
Image:

This Habitat for Humanity builder ordered roof trusses with a 2-foot by 2-foot notch next to the center post then lined the cutout with rigid foam to form an insulated central duct chase to bring the heating and cooling ducts within the conditioned space.

This Habitat for Humanity builder ordered roof trusses with a 2-foot by 2-foot notch next to the center post then lined the cutout with rigid foam to form an insulated central duct chase to bring the heating and cooling ducts within the conditioned space.
Image:

This home’s ultra-efficient ground-source heat pump provides hot water for space heating as well as domestic hot water for the 50-gallon storage tank.

This home’s ultra-efficient ground-source heat pump provides hot water for space heating as well as domestic hot water for the 50-gallon storage tank.
Image:

This is a take-off collar for connecting a round metal duct to a flat sheet metal trunk duct.

This is a take-off collar for connecting a round metal duct to a flat sheet metal trunk duct.
Image:

This is an example of an insulation pattern for rigid metal ducts that has been measured and cut in a comfortable location before being carried into the attic.

This is an example of an insulation pattern for rigid metal ducts that has been measured and cut in a comfortable location before being carried into the attic.
Image:

This louvered vent cap works well for clothes dryer vent ducts because it has no screening that could trap dryer lint

This louvered vent cap works well for clothes dryer vent ducts because it has no screening that could trap dryer lint
Image:

This plan view of a multifamily building shows how a leaky central exhaust system can create negative pressure zones, pulling unconditioned outside air or humid inside air into the service shaft and wall cavities

This plan view of a multifamily building shows how a leaky central exhaust system can create negative pressure zones, pulling unconditioned outside air or humid inside air into the service shaft and wall cavities
Image:

This return inlet has been covered and sealed in preparation for a duct leakage test at rough-in.

This return inlet has been covered and sealed in preparation for a duct leakage test at rough-in.
Image:

This rigid duct connection was repaired using self-piercing/self-drilling sheet metal screws to mechanically secure the connection; then it was air sealed using UL-181 fiber-reinforced duct sealant mastic paste

This rigid duct connection was repaired using self-piercing/self-drilling sheet metal screws to mechanically secure the connection; then it was air sealed using UL-181 fiber-reinforced duct sealant mastic paste
Image:

This rigid metal duct connection was taped with regular duct tape and became disconnected when the tape adhesive failed

This rigid metal duct connection was taped with regular duct tape and became disconnected when the tape adhesive failed
Image:

This saddle take-off collar is used to connect a round sheet metal duct to another round sheet metal duct.

This saddle take-off collar is used to connect a round sheet metal duct to another round sheet metal duct.
Image:

This semi-rigid clothes dryer exhaust duct has excessive length; the bends in the duct will severely restrict air flow and could lead to clogging of the duct by dryer lint

This semi-rigid clothes dryer exhaust duct has excessive length; the bends in the duct will severely restrict air flow and could lead to clogging of the duct by dryer lint
Image:

This single-zone mini-split ductless heat pump has only one indoor wall-mounted unit and one outdoor unit.

This single-zone mini-split ductless heat pump has only one indoor wall-mounted unit and one outdoor unit.
Image:

This supply outlet is covered and sealed prior to a duct leakage test at final.

This supply outlet is covered and sealed prior to a duct leakage test at final.
Image:

This take-off collar for a round metal duct is secured to the HVAC plenum using #7 x ½-inch self-piercing/self-drilling sheet metal screws.

This take-off collar for a round metal duct is secured to the HVAC plenum using #7 x ½-inch self-piercing/self-drilling sheet metal screws.
Image:

This technique for installing electrical wiring avoids the need to cut into the SIP panel

This technique for installing electrical wiring avoids the need to cut into the SIP panel
Image:

This traditional centrally ducted heat pump heats and cools the entire home through a network of ducts.

This traditional centrally ducted heat pump heats and cools the entire home through a network of ducts.
Image:

This typical central ductwork system for a multifamily building includes all ductwork sections, such as vertical risers, main trunks, horizontal run outs, branches, and take-offs

This typical central ductwork system for a multifamily building includes all ductwork sections, such as vertical risers, main trunks, horizontal run outs, branches, and take-offs
Image:

This typical dropped ceiling hallway chase shows a complicated air sealing scheme where chase ceiling drywall meets sidewall top plates

This typical dropped ceiling hallway chase shows a complicated air sealing scheme where chase ceiling drywall meets sidewall top plates
Image:

This utility room houses a high-efficiency gas boiler to provide hot water for the radiant floor heating system and faucets. It also has a central air source heat pump and an energy recovery ventilator.

This utility room houses a high-efficiency gas boiler to provide hot water for the radiant floor heating system and faucets. It also has a central air source heat pump and an energy recovery ventilator.
Image:

To attach the flex duct to a main trunk duct or any other connection, the flex duct is pulled over the connecting collar at least 2 inches past the raised bead, then the insulation is pulled back

To attach the flex duct to a main trunk duct or any other connection, the flex duct is pulled over the connecting collar at least 2 inches past the raised bead, then the insulation is pulled back
Image:

To keep chase width to a minimum, use flat sheet metal as opposed to a collar and flex duct for supplies into rooms where the chase is located

To keep chase width to a minimum, use flat sheet metal as opposed to a collar and flex duct for supplies into rooms where the chase is located
Image:

To measure air flow, a hole was made in this flex duct; a more accurate measurement could be taken if the duct material were rigid metal, not flex duct

To measure air flow, a hole was made in this flex duct; a more accurate measurement could be taken if the duct material were rigid metal, not flex duct