Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 817 - 840 of 887 results:

Image:

Wrong - If this kitchen exhaust duct had been extended a few inches, at least one bend could have been eliminated.

Wrong - If this kitchen exhaust duct had been extended a few inches, at least one bend could have been eliminated.
Image:

Wrong - Kitchen exhaust ducts are prohibited from terminating within 3 feet of an operable window or near gable vents.

Wrong - Kitchen exhaust ducts are prohibited from terminating within 3 feet of an operable window or near gable vents.
Image:

Wrong - Kitchen exhaust fans must be located directly over the stove top to be effective at capturing and removing cooking pollutants.

Wrong - Kitchen exhaust fans must be located directly over the stove top to be effective at capturing and removing cooking pollutants.
Image:

Wrong - Metal tape is poorly adhered and metal duct and duct-to-subfloor seam is not sealed.

Wrong - Metal tape is poorly adhered and metal duct and duct-to-subfloor seam is not sealed.
Image:

Wrong - Not enough straps were used to hang this flex duct so it is sagging, restricting air flow

Wrong - Not enough straps were used to hang this flex duct so it is sagging, restricting air flow
Image:

Wrong - Penetrations in walls for ducts should be air sealed to reduce air leakage.

Wrong - Penetrations in walls for ducts should be air sealed to reduce air leakage.
Image:

Wrong - Recessed can light is compressing duct work.

Wrong - Recessed can light is compressing duct work.
Image:

Wrong - Seam in duct boot is not sealed.

Wrong - Seam in duct boot is not sealed.
Image:

Wrong - Seam in round metal duct is not sealed.

Wrong - Seam in round metal duct is not sealed.
Image:

Wrong - Seams and holes in duct boot need to be sealed.

Wrong - Seams and holes in duct boot need to be sealed.
Image:

Wrong - Seams at duct elbow are not fully sealed with mastic.

Wrong - Seams at duct elbow are not fully sealed with mastic.
Image:

Wrong - Seams in metal ducting are not sealed.

Wrong - Seams in metal ducting are not sealed.
Image:

Wrong - The furnace intake and exhaust are too close to each other and are missing rodent screening.

Wrong - The furnace intake and exhaust are too close to each other and are missing rodent screening.
Image:

Wrong - The furnace intake and exhaust are too close to each other and should be facing different directions.

Wrong - The furnace intake and exhaust are too close to each other and should be facing different directions.
Image:

Wrong - The IRC prohibits the use of flex duct for kitchen exhaust and only permits PVC duct for downdraft systems that meet specific exceptions; also, gaps at the ceiling have not been air sealed.

Wrong - The IRC prohibits the use of flex duct for kitchen exhaust and only permits PVC duct for downdraft systems that meet specific exceptions; also, gaps at the ceiling have not been air sealed.
Image:

Wrong - The IRC requires that kitchen exhaust ducts terminate outside, at least 3 feet from operable windows.

Wrong - The IRC requires that kitchen exhaust ducts terminate outside, at least 3 feet from operable windows.
Image:

Wrong - The seam around the duct boot where the duct boot enters the trunk duct has not been completely sealed with mesh tape and mastic.

Wrong - The seam around the duct boot where the duct boot enters the trunk duct has not been completely sealed with mesh tape and mastic.
Image:

Wrong - The support strap for the duct is too tight and the radius of the turn is too sharp.

Wrong - The support strap for the duct is too tight and the radius of the turn is too sharp.
Image:

Wrong - This flex duct is so twisted air flow is greatly restricted

Wrong - This flex duct is so twisted air flow is greatly restricted
Image:

Wrong - This is a poorly sealed chase with no solid air barriers along the sides of the chase and no caulk around the electrical wires installed through the ceiling of the chase.

Wrong - This is a poorly sealed chase with no solid air barriers along the sides of the chase and no caulk around the electrical wires installed through the ceiling of the chase.
Image:

Wrong - This kitchen exhaust duct uses flex duct, which is prohibited by code, and the duct’s 22-foot length and multiple bends will slow the movement of pollutants out of the home.

Wrong - This kitchen exhaust duct uses flex duct, which is prohibited by code, and the duct’s 22-foot length and multiple bends will slow the movement of pollutants out of the home.
Image:

Wrong - This tape product is not code approved for duct sealing.

Wrong - This tape product is not code approved for duct sealing.
Image:

Wrong -The duct does not have enough support so it is sagging and compressing the duct

Wrong -The duct does not have enough support so it is sagging and compressing the duct
Image:

Wrong – A tear in the outer jacket of this duct shows where an in-line airflow measurement was made; the inner duct was not sealed and created a duct leak.

Wrong – A tear in the outer jacket of this duct shows where an in-line airflow measurement was made; the inner duct was not sealed and created a duct leak.